Doing a poll to see who would like to have a set of LPP LT1 stainless headers and Y.

[LPP]

We are doing this pole just to judge the interest in this forum of members that would like to buy our LT1 stainless headers and Y.
It's going to cost a lot of money to put these into production and we do have some other project that people have shown interest in.
So we are just wanting to judge which would be better for us.
I know our LT1's have always sold really really well in the past that's why I'm pushing for the LT1's over the other products.

Thanks, Carl

[LPP]

I voted Yes:)

[BlackWidowSS]

I voted YES!!! Without a doubt!

[95 blackbird]

YES! Please make these headers. Im sure there are plenty of people out there just like me that cant afford $1100+ for a quality set of stainless headers.

[mattgw86]

Hopefully by the end of this year I'll be able to do some more mods to my Z. Exhaust is near the top of that list. Some LPP Stainless long tubes, if available, would definitely be my first choice.

[Fastbird]

Though I won't be utilizing a set, I had to vote yes on this. The LT1 folks NEED something with some R&D behind it that's cheaper than Kooks. Granted Hooker and Pacesetter both are cheap alternatives, but there's no R&D there anymore, while LPP continues to revise, improve, and get everything they can out of them. In other words.....HELL YES.

[BlackWidowSS]

COME ON!!! 78 views and only 5 freaking votes??!! You guys do realize that they are talking about scrapping the LTX Headers and moving on right?? That means one less vendor selling new LTX parts and leaving us with Ebay, Pacesetter or Kooks!!! If you view the thread it takes a measly 2 seconds to click yes or no! Even if you do not plan to buy the day they come out, who knows, maybe you will want some good quality headers later on and not spend a fortune!!!

[SexyTransAm]

Cant vote on tapatalk.

Sent from my SAMSUNG-SGH-I547 using Tapatalk 4 Beta

[popo8]

Finally on a computer... and voted :YES.

Although they wont go on the camaro unless the pacesetters get hurt (for no other reason than...she is set up, and good for now)... they would def go on my next LTX project...

[SexyTransAm]

Id love to have a set of llp. Kooks r just way the hell to crazy! I plan to have a set before long!

Sent from my SAMSUNG-SGH-I547 using Tapatalk 4 Beta

[popo8]

https://www.facebook.com/media/set/?set=a.476447319103891.1073741865.136582729757020&type=3

Reaching out to more LTX owners that may not be a member on the site....

[Kick's96Z]

YESSSSS....FINALLLLYYYYY!!!!!!!!!!!!!

[Tbird232ci]

At this moment, I can't buy a set. I'm hoping this coming year, I can get a set of these headers and put the car in a shop to get a true dual exhaust on it. My Pacesetters are rusting pretty bad and I've smashed em pretty good today. Poor things.

[casey20000007]

I vote yes, no way to vote on tapa


SMOKE TIRES NOT DRUGS

[Mangelby]

Yes

[LPP]

Well it's at 15 right now. Our minimum production run is 100 to make a profit on a normal run. But I understand I'm only asking for who's interested on this forum. If we make them I'm sure a lot of people on other forums will want them.
I'm just using this forum as a gauge of interest.

[LPP]

With 15 yes votes here I can't believe no one wants the satin set to test fit for $400.

[popo8]

LPP, can you see the fb album I made for this....?

If so, there is some interest showing up over there as well.

[twgoodspeed]

No doubt.......YES

[popo8]

LPP... would it be difficult to make the set that you are now offering for testing, polished?

[LPP]

Yes they can be polished but it would take you a longgggg time. Have you ever polished a wheel? Well you would have to polish all the way around all four pipes on both headers getting in between all the pipes.
Not something that I would really want to try. Yes it could be done but being mill finish your would first have to buff them with ruff polish then go down to fine polish. That's why we polish the pipes before we make them because the pipes are just straight lengths of pipe and we use a pipe buffing machine to do it. Then we do the cuts and bends and weld them up. After that we just have to do some touch ups on the polishing.

[popo8]

Yes they can be polished but it would take you a longgggg time. Have you ever polished a wheel? Well you would have to polish all the way around all four pipes on both headers getting in between all the pipes.
Not something that I would really want to try. Yes it could be done but being mill finish your would first have to buff them with ruff polish then go down to fine polish. That's why we polish the pipes before we make them because the pipes are just straight lengths of pipe and we use a pipe buffing machine to do it. Then we do the cuts and bends and weld them up. After that we just have to do some touch ups on the polishing.

Lol... I meant u guys polish it. haha. I hate polishing stuff. now i see u explained u polish before assembly...

I just was brainstorming on what to do to make last set more desirabke

Co-Owner/Admin @ LTXtech.com

[LPP]

Ok when I set up this poll I was just going to put a yes answer. But then I thought well why not put a yes and no just for the heck of it.
I really didn't think anyone would say no but someone has :( So we have 17 yes's and 1 no. Why would you vote No?

[LPP]

Ok I can see now how I got one no vote. The guy has no post here at all ever and just joined a few days ago and didn't even make a comment in the thread about why he voted no.
I ran into this issue years ago when we first come out with the LT1 headers and I was on LS1tech. One of the Kooks guys kept setting up new user names and just making one post in every thread I had about the LT1 headers trying his best to bash them.
Some people just never give up I guess:)

[casey20000007]

I'd like to get a set but I've still gotta get my driveline finished and tune but after all is said and done i will most likely be getting a polished set, I was wondering do y'all offer a ceramic coated version


SMOKE TIRES NOT DRUGS

[BlackWidowSS]

I don't think they offer a ceramic coat...however I am curious what it would run to have my set shipped to someone who CAN ceramic coat them, and send them back...what are the benefits and downfalls of ceramic coating other than cost?

[MeanTA]

I don't think they offer a ceramic coat...however I am curious what it would run to have my set shipped to someone who CAN ceramic coat them, and send them back...what are the benefits and downfalls of ceramic coating other than cost?

Under hood heat reduction more then anything. But then you got to worry about chipping later in its life.

You could send them off and have inside coated or something. Im more of a fan of the SS look myself.

[BlackWidowSS]

I love the polished SS, don't get me wrong...however my old ones have become rainbow colored lol. I am curious to find a way to retain the polished silver look, if it is even possible...I am not sure how ceramic coating and all of that stuff works to be perfectly honest...or even what it looks like when it is done...never had ceramic coated headers. I had a set of Dynatech Satin SS headers in the car when I bought it...I took those off asap and got my LPP Polished SS headers...haven't looked back since.

[MeanTA]

Have you used any SS polish on them to remove the rainbow?

Its a common issue. My Kook's was starting to do it by the flange and down the primaries a ways. More so after the dyno. Because if the heat from full throttle pulls.

[BlackWidowSS]

I have not...I may try that soon. I am going to keep this old set after I get my new ones, so I might give it a shot and see how it turns out. Thanks!

[MeanTA]

I have not...I may try that soon. I am going to keep this old set after I get my new ones, so I might give it a shot and see how it turns out. Thanks!

Get a polish compund called Blue Away. I got great results on my bike when i used it.

Mothers all metal polish also does a great job.

[BlackWidowSS]

Will do man, thanks! Ok, sorry for the hijack....back to the main topic haha!

[Fastbird]

Lonnie, two things. One, for what it's worth, I think a single no vote isn't going to be a deal breaker. Haters gonna hate. Two.......if I had the money, I'd buy an unmolested car simply for a reason to pick up a set of these headers.

[duff man]

I have a set for my 1995 Z28 that have been on the car for several years and they still look great! I have also never blown a gasket on them (a major issue with the previous headers I was running). I also run a set on my wife's 1999 LS1 Firehawk. Best header out there for the price.

[SchaefZ28]

Voted yes. I don't know if I'd be ready to plop down the cash for them just yest, but I'd love to get a stainless set for my new motor.. Who knows, I'm pretty good at hording parts.. :whistle: Besides, my ceramic coated pacesetters are starting to rust on the collectors..

[Sahara54]

When my finances are straight I will defiantly go with a set of LPP's. I planned to go long tubes anyway before i installed my engine.

[Mangelby]

Did u vote on the poll or just writting YES.

Co-Owner/Admin @ LTXtech.com

Voted yes.

[meissen]

We need to publicly shame the three people who have sets and haven't given feedback. I believe the same manufacturer that LPP uses is being used by a sponsor on mifbody because he was just getting LT1 headers and y-pipe sets out for people to test fit also. We already got his feedback in, no reason for there to be 3 people who have a set and aren't getting them installed immediately and getting the pictures -- that was 100% entirely the deal they signed up for when they bought those headers.

That said - while I already have a set on my Camaro, I voted yes because I really wish this was a permanent production item. I also wish you guys were making the true duals still also. :lol:

[MeanTA]

We need to publicly shame the three people who have sets and haven't given feedback. I believe the same manufacturer that LPP uses is being used by a sponsor on mifbody because he was just getting LT1 headers and y-pipe sets out for people to test fit also. We already got his feedback in, no reason for there to be 3 people who have a set and aren't getting them installed immediately and getting the pictures -- that was 100% entirely the deal they signed up for when they bought those headers.

That said - while I already have a set on my Camaro, I voted yes because I really wish this was a permanent production item. I also wish you guys were making the true duals still also. :lol:

Hey now.... I gave my feed back weeks ago. And i sent pictures. People need to stop saying the 3 people. I did my part if the say the never got them. And if they needed more pics then what i sent. They could have contacted me long ago. They have here,my email, and phone number. I will get detailed pics of every bend dip turn and tuck. When i can. I am working 60-70 hour weeks. Plus a family at home.

See how a couple post saying 3 people. Just spreads a fire that isn't true.......

[Fastbird]

Who are the others besides MeanTA who got sets and were supposed to kick feedback? Hell, I'd rip my turbo kit off my car in order to test fit a set of these just to give feedback if that's necessary.

[Sahara54]

I know one set got sent back, that's why they have the extra satin set available. I think that means only one set is unaccounted for. MeanTA documented his install very well.

[meissen]

Hey now.... I gave my feed back weeks ago. And i sent pictures. People need to stop saying the 3 people. I did my part if the say the never got them. And if they needed more pics then what i sent. They could have contacted me long ago. They have here,my email, and phone number. I will get detailed pics of every bend dip turn and tuck. When i can. I am working 60-70 hour weeks. Plus a family at home.

See how a couple post saying 3 people. Just spreads a fire that isn't true.......

Wasn't directed at you - I assumed since they said they were waiting on 3 that there must have been 4 total.

[MeanTA]

Wasn't directed at you - I assumed since they said they were waiting on 3 that there must have been 4 total.

Nope there is 2 other sets out. Besides mine. I am considered one of the 3. And my name seems to pop more often for some reason.

[Soxxpuppet]

Definitely Yes! Ive been looking into upgrading my cheapo LT's with a nice high quality header that doesnt cost $1k!

[BlackWidowSS]

Just saw 2 more yes's on the LS1Tech post...not sure if those 2 voted here yet, but I just asked them to if they haven't.

[The Batman]

YES!

[Blackbird96WS6]

Just voted yes in the poll, only because there's not a "Hell yes!" option :(

[camar0corey]

A yes vote here! I need something to replace my dented/rusted pacesetters.

[ThoR294]

I'd gladly take a test set for $400. IDC what they look like. as long as I get horsepower :)

I have a 96 WS6 6speed, btw. I do not feel like spending $1000 on headers. my GF would murder me

[BlackWidowSS]

Then get then Thor! They still have the set last I heard

[Chrizar]

if someone would buy my pacesetters for 400 I'd for sure pick these up and test them out. Not like it would take me long to get them on at all.

[Soxxpuppet]

LPP. Are the satin set still available for $400?

[LPP]

Yes they are still available.

[LPP]

Now there is two no's why would you vote no?

[ThoR294]

20667
This is a picture from one of the test headers... why do the chambers look like that?

[BlackWidowSS]

Lol, Carl, 2 no's....45 yes's....I say that is almost half of what you need for a production run from one site...What do you think? lol

[LPP]

After they are welded up they are ground inside to smooth the welds and match the gaskets.

[LPP]

2067420675

Ok here's two pictures one is the ports on the sample set that was posted here the other is one of the last run of productions ones.
Yes they did kind of quickly grind the ports on the sample sets.

[BlackWidowSS]

Very nice! :)

Those are Gen 2's?

[LPP]

Yes the production picture is the Gen 2's

[BlackWidowSS]

So how close are we to convincing you guys that a production run of Gen 3's will be good for business? lol

[LPP]

Still waiting on more pictures and feedback on the three test sets.
So far it's looking good we have feedback and some pics from two of them.
But we still have the set of satin finish ones that our manufacture still wants to see installed before we go forward.

[BlackWidowSS]

Did SoxxPuppett not take them, or has he messaged you at all?

[LPP]

Haven't heard from him.

[Soxxpuppet]

Sory was watching a movie. LPP Im bigger on LS1tech if you want to verify name. I would just like alittle bit more information on the headers. Possibly some pictures of the exact set. If you could email me at soxxpuppet@gmail.com and we can figure it out. I wasnt planning on spoending money on headers right now. But I might be willing to sacrifice alittle ;)

[Sahara54]

LPP ^^^^

[Madman337]

Not just a yes vote but a HELL YES VOTE!!!!!
These will be passed along with the car to my Grandson who I gave the Z/28 to when he was a month old so they need to still be out there for the next generation to enjoy, keep that in mind ok because there will be a demand for them that will be even stronger than now later on I am sure.
I hate being broke because these would be a great first step in the right direction for my build and I have no cash, donate them for a test and review and I will do it and even send them back just so you can see how well they work and you have my word on it. Let me know if your interested because I would be honored to do it.

[absi]

I'd like to get a set

[spikester7878]

voted yes. I really cant wait to replace my pacesetters.

[ThoR294]

I just want to replace my boat anchors... I've been doing other mods because I can't spend that kind of money on Kooks

[Soxxpuppet]

LPP I sent you a PM regarding the headers.

[AZ2ENVY]

Why in the hell would someone vote no!? The LTX market is dwindling at best, to vote no on new products is fucking absurd.

[Soxxpuppet]

Some people are just Retated derrrrrr! They probably dont even belong to the forums or care about anything

[meissen]

Well - considering one of the "No" votes was CALL911, why don't you ask him? :lol:

[AZ2ENVY]

Well - considering one of the "No" votes was @CALL911 (http://ltxtech.com/forums/member.php?u=77), why don't you ask him? :lol:


Him and DVS LT1. I hope they can at least chime in here and explain their reasoning........

[meissen]

Yeh, I only mentioned CALL911 since I recognized his username, not familiar with DVS LT1.

[Soxxpuppet]

I Pmed LPP About taking the satin set of test headers. If there still available ill get them and hopefully get them installed in the next 2 weeks or so.

[CALL911]

Mine was a mistake, as I meant to vote "yes" (and once it was done, I couldn't figure out how to change it).

So, make that "2" votes no.

[ThoR294]

from DVS on LS1tech:

"The issue I had with my LPP "SS Autochrome" headers was with their quality control and customer support (or lack thereof), NOT so much their design.

These new 3rd gen models could be God’s gift to LT1’s for all I care, I would never buy another set of headers from this outfit (dude). In this day & age you get one chance at my business, doesn’t matter what your service or product is. If it ends up being poor, you’ll never get my business again. Even if I know that is typical or the standard for that product/industry and among the competitors; doesn’t matter. If you get your chance and blow it, the next time it will be another provider getting a shot at my business.

And BTW that crappy little install thread link from LTx site is not the thread we are talking about – the LS1tech LPP install thread was massive – it was like hundreds of efen pages if I’m not mistaken, can’t even remember what the reply count was tracking. It must have been one of the biggest threads ever on this site > DELETED. All that feedback, all those pictures, all the updates from the LPP guy himself and excuses for delays, etc GONE.

I challenge somebody to find it, or explain exactly what happened to it."

[BlackWidowSS]

Hahahahaha

[ThoR294]

*shrug*

I hope these go into production. I am still repairing my car and it needs to be painted (Sandy smashed a tree into the passenger headlight/fender)

[Soxxpuppet]

Im waiting for LPP to give me a way of paying for the last set of satin headers then im going to get 'em. Atleast I hope

[LPP]

Soxxpuppet PM replied too.
Here's a picture of the stain set.
20694

[Soxxpuppet]

lll take them! Pm replied!

[BlackWidowSS]

That's what I like to hear!!! lmao :D

[Soxxpuppet]

payment set for the satin headers :)

[popo8]

payment set for the satin headers :)

Thanku soxxpuppett...

Ur purchase...install review....could literally have a HUGE impact on the ltx aftermarket.


So THANK YOU for being a part of keeping ltxers going.

Co-Owner/Admin @ LTXtech.com

[LPP]

Payment received and order processed.
They should ship out tomorrow.
Hopefully you can get them installed next weekend and provide a lot of pictures and feedback:)

[Soxxpuppet]

Thanku soxxpuppett...

Ur purchase...install review....could literally have a HUGE impact on the ltx aftermarket.


So THANK YOU for being a part of keeping ltxers going.

Co-Owner/Admin @ LTXtech.com

"With Great Power comes Great Responsibility."

Im just merely trying to do my part! :cheers:

[BlackWidowSS]

lol, we look forward to the install thread!!! haha

[Soxxpuppet]

It shall be long and prosperous ;)

[Fixxer99TA]

I voted yes, I missed your last run so I ended up with Pacesetters... They arent bad but could probably be a bit more quality... Would have definitely wanted LPP Stainless of course.. I used to know a kid around here who got them and really liked them.

If I need headers in the future, on say.... this car or any other project of mine.... You can guess what I will be going with.

[LPP]

Ok some good news:)
Out LT1 headers are finally going into production.
We will be offering them in both polished and satin finish.
Sorry don't have a completion date yet for them.

Mean while our LT1 and LS1 F-body true duals will be back in stock in about 3 weeks.

And our 99-06 GM 1500 truck headers and Y will be back in stock about the same time.

[popo8]

Thats great news!!!


Thanku!

MEMBER @ LTXtech.com

[casey20000007]

Sweetness ill have to get a set sometime. Hopefully they're not too pricy


SMOKE TIRES NOT DRUGS

[Blackbird96WS6]

Awesome news! Looking forward to being able to get a set!

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[dstrick8]

Awesome! I am ready the second they are available.

[JCzNova]

Ok some good news:)
Out LT1 headers are finally going into production.
We will be offering them in both polished and satin finish.
Sorry don't have a completion date yet for them.

Mean while our LT1 and LS1 F-body true duals will be back in stock in about 3 weeks.

And our 99-06 GM 1500 truck headers and Y will be back in stock about the same time.

Very interested as the Nova will be getting an overhaul this winter. A few questions.

-The SS LTs, sold separately from the Y?
-Does the true dual setup run these same headers, or are they specific to the true dual kit?
-Are either of the sets equal length long tubes? As I would not be running an F-body Y pipe.

Thanks in advance for your time!
LPP

[CamaroZGuy]

Ok some good news:)
Out LT1 headers are finally going into production.
We will be offering them in both polished and satin finish.
Sorry don't have a completion date yet for them.

Mean while our LT1 and LS1 F-body true duals will be back in stock in about 3 weeks.

And our 99-06 GM 1500 truck headers and Y will be back in stock about the same time.


will this be a limited run time frame?

[englundjd]

Thank you Lord, ready to purchase the second there available!

[Homerandabe69]

Are the true duals over or under axle? Also what sort of pricing are we looking at for everything?

[LPP]

Very interested as the Nova will be getting an overhaul this winter. A few questions.

-The SS LTs, sold separately from the Y?
-Does the true dual setup run these same headers, or are they specific to the true dual kit?
-Are either of the sets equal length long tubes? As I would not be running an F-body Y pipe.

Thanks in advance for your time!
@LPP (http://ltxtech.com/forums/member.php?u=5299)

Yes we will sell just header to those that want just headers and then you can buy the true duals instead of getting the Y.
The true duals do work with the headers but they were designed for the LS1 F-bodies so one of the pipes on the drivers side has to have about 1" cut off of it for it to fit.
Sorry they are not equal length headers.

[Soxxpuppet]

:finger: F#CK YEAH! Goodjob LPP!!!!

[LPP]

:finger:

[ThoR294]

itching for headers... :)

[JCzNova]

itching for headers... :)

x2

[Blackbird96WS6]

itching for headers... :)

x3

[englundjd]

x4 lol

[Madman337]

Ok some good news:)
Out LT1 headers are finally going into production.
We will be offering them in both polished and satin finish.
Sorry don't have a completion date yet for them.

Mean while our LT1 and LS1 F-body true duals will be back in stock in about 3 weeks.

And our 99-06 GM 1500 truck headers and Y will be back in stock about the same time.

I sure would like to see pics of the true dual set up if you have them?
Oh and X's 5 LOL

[KaGe]

I skipped over some pages....but any word on what the pricing would be for the LT's and Y???

I've been looking for an excuse to get rid of these Pacesetter mids...

[Blackbird96WS6]

LPP any word on this?

[beaver50]

Im ready to buy!!!!!!!!

[LPP]

We will be receiving another test set soon with a couple of small adjustments we made.
If things go OK with them we can then go into production.

[Blackbird96WS6]

Sweet, any ETA yet on that? Are you going to be selling the test set to someone on here again or testing it on your own?

[LPP]

Not sure yet. The last 4 test sets we had only one person gave us good pictures and feedback on them.
The other 3 just go a hell of a deal on stainless headers and Y :(
So may have to do the install myself.

[Blackbird96WS6]

That's why I ask lol.

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[LPP]

Anyone here live in the Tampa Bay area?

[dstrick8]

Hey Carl, I sent you a PM.

[spikester7878]

Anyone here live in the Tampa Bay area?

I'm in plant city

[BIG CAT]

Anyone here live in the Tampa Bay area?

for?

[Louvit]

Yes ...if they are priced right, I have old painted Mac Mid Length on mine and sure need an update. If you need a car TO SHOW THEM I'LL GLADLY LET YOU DO MINE.....HAHA

[Puck]

Anyone here live in the Tampa Bay area?
Orlando here, not too far.

[Shanle929]

Can someone explain the LPP company? I have only my ipad and nothing really shows but a player with AC/DC. I've been looking at Kooks LT for awhile. What is the likely hood for these? Any details?

[ThoR294]

I was in Tampa 2 weeks ago for a concert... I coulda maybe checked in a bag with the headers inside :D haha!

[englundjd]

Can someone explain the LPP company? I have only my ipad and nothing really shows but a player with AC/DC. I've been looking at Kooks LT for awhile. What is the likely hood for these? Any details?

http://lpparts.com/store/page6.html

[Homerandabe69]

Is this still going to happen?

[popo8]

LPP

MEMBER @ LTXtech.com

[ThoR294]

cricket cricket :)

[LPP]

We have another test set coming in next week and someone set up to do the install.
So we will see how things go:)

[popo8]

We have another test set coming in next week and someone set up to do the install.
So we will see how things go:)

is this a test set modified based on different inputs from the last?

MEMBER @ LTXtech.com

[JCzNova]

LPP PM Sent

[LPP]

What input from the last test sets?
We had 4 of them and got good pics and feedback from 1:(
Everyone else just got a great set of headers really cheap.

[JCzNova]

What input from the last test sets?
We had 4 of them and got good pics and feedback from 1:(
Everyone else just got a great set of headers really cheap.

Exactly why I PM'ed. If you want a no BS install, pics, and write up on a set. I'm your guy! :D

[firebird_1995]

What input from the last test sets?
We had 4 of them and got good pics and feedback from 1:(
Everyone else just got a great set of headers really cheap.

The other 3 had no input at all?

[Blackbird96WS6]

I thought MeanTA also did a good review and write up for you guys.

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[MeanTA]

What input from the last test sets?
We had 4 of them and got good pics and feedback from 1:(
Everyone else just got a great set of headers really cheap.

Insert buzzer sound here

[Blackbird96WS6]

Still can't figure out why LPP keeps trying to ignore the fact that you were the first one to test them and you even went above and beyond in trying out two different k-members. You got pics when asked and did this all within a couple weeks of receiving them. :confused:

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[fleetfeet2004]

Well regardless, we all need nice headers for lt1's because the only options are pacesetter, hooker and kooks. Which are all ok but they all have compromises. pacesetter fit really good, but they are cheaply made and their y pipe doesn't fit good at all. Hooker has poor ground clearance and they are really expensive for coated. Kooks are way expensive when lpp could make something that competes directly with them, except they have an opportunity now to create the best header for lt1's.

They could become the best fitting, best performing, best fitting/flowing y pipe and stainless on top of all that. Obviously it they do all that and manage good clearance for steering shaft and spark plugs and k member and a good fitting y with good ground clearance and a good merge then obviously everyone with an lt1 would buy them. Especially if they are competitively priced. It would be a no brainier for literally everyone.

If they were smart they could also build a duals setup like tsp's except designed to fit their lt1 headers. Just a thought... wink wink. :cool:

[JCzNova]

Soooo, since your not a lawyer or doctor can I ask for the screen names of the 4 people who have gotten headers already?

[firebird_1995]

Soooo, since your not a lawyer or doctor can I ask for the screen names of the 4 people who have gotten headers already?

To the best of my knowledge....

MeanTA-pics and install notes in build thread
Soxxpuppet-pics and install thread
Manbearpig- pics of install but with no trans in car
Black heartbeat- family/work issues

[JCzNova]

To the best of my knowledge....

MeanTA-pics and install notes in build thread
Soxxpuppet-pics and install thread
Manbearpig- pics of install but with no trans in car
Black heartbeat- family/work issues

Thanks Chris. The '93 has factory manifolds on it and I would HATE to start looking at Pacesetters because this is dragging out.

[Homerandabe69]

I have a new set of coated Pacesetters that are waiting for me to start working on my build again and I would love to sell them to replace them with these LPPs when they go into production.

[popo8]

LPP please take note that I will vouch for JCZNova and his intentions to give u what u need for a chance to make these things go into production.



MEMBER @ LTXtech.com

[englundjd]

soooo where are they at as far as getting things into production?

[95 blackbird]

LPP, you WILL be getting some of my tax return money. As stated by others above, I would hate to SETTLE on pacesetters,& kooks are out of my price range. Sooo, lets get this run rollin and into the market!

[JCzNova]

I have a new set of coated Pacesetters that are waiting for me to start working on my build again and I would love to sell them to replace them with these LPPs when they go into production.

How much you looking to get for those? Shipped to 23464?
Homerandabe69

[JCzNova]

I have a new set of coated Pacesetters that are waiting for me to start working on my build again and I would love to sell them to replace them with these LPPs when they go into production.

How much you looking to get for those? Shipped to 23464?
Homerandabe69

[beaver50]

I got tired of waiting and bought a set from ebay that was pasted on this thread.There a great set up.i love them sound great and very esy to install.

http://www.ebay.com/itm/150503775251?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[JCzNova]

I got tired of waiting and bought a set from ebay that was pasted on this thread.There a great set up.i love them sound great and very esy to install.

http://www.ebay.com/itm/150503775251?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

That looks nice, no mufflers? Or how does that work?
beaver50

[JCzNova]

I got tired of waiting and bought a set from ebay that was pasted on this thread.There a great set up.i love them sound great and very esy to install.

http://www.ebay.com/itm/150503775251?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

That looks nice, no mufflers? Or how does that work?
@beaver50 (http://ltxtech.com/forums/member.php?u=6189)

Edit: I scrolled down and saw the 3" bullet muffler on the other pics. Did you use band clamps?

[beaver50]

I did use band clamps.They bolt up great the guy that does them has a shop to do custom exhaust.

[JCzNova]

I did use band clamps.They bolt up great the guy that does them has a shop to do custom exhaust.

Do you have any video clips of the sound? We might as well have some action in this thread :D
beaver50

[Homerandabe69]

I would gladly ship them to you if I wasn't in hawaii. It would be cheaper for you to just purchase them on amazon.

[beaver50]

Do you have any video clips of the sound? We might as well have some action in this thread :D
@beaver50 (http://ltxtech.com/forums/member.php?u=6189)

No I dont have no video of them.I bought them because of post on this thread.I think he has a video of them.

[JCzNova]

I would gladly ship them to you if I wasn't in hawaii. It would be cheaper for you to just purchase them on amazon.

True, I didn't see that on Tapatalk. :laugh:

[LPP]

JCZNova is getting the new test set:)
I had someone else lined up to do the install but they backed out at the last min.
Just don't understand people:(

[JCzNova]

JCZNova is getting the new test set:)
I had someone else lined up to do the install but they backed out at the last min.
Just don't understand people:(

Well, I am glad that he mad a poor decision. Payment sent!

[popo8]

JCZNova is getting the new test set:)
I had someone else lined up to do the install but they backed out at the last min.
Just don't understand people:(

Well I guarantee u...JCZ wont let u down.

MEMBER @ LTXtech.com

[JCzNova]

Well I guarantee u...JCZ wont let u down.

MEMBER @ LTXtech.com

Hope to have them in by the 1st, depending on shipping. Coming from NC should be pretty quick. Excited!

[LPP]

Well the good news is if this install goes as good as we hope it does with the changes we made and no new issues we can go forward with production we should have them in stock in about 45 days :)

[popo8]

Well the good news is if this install goes as good as we hope it does with the changes we made and no new issues we can go forward with production we should have them in stock in about 45 days :)

great news


MEMBER @ LTXtech.com

[Blackbird96WS6]

Well the good news is if this install goes as good as we hope it does with the changes we made and no new issues we can go forward with production we should have them in stock in about 45 days :)

I really really really hope this set is perfect! I want me some headers soon!

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[LPP]

Me too :) You have no idea how many emails and PM's I get everyday from people wanting them.

[englundjd]

lol i think i've sent atleast two personally

[JCzNova]

Just my new Innova scanner in the mail today. Will update everyone tomorrow.

[Soxxpuppet]

Im happy to see this still going! I Love my headers. theyve held up great for me so far. I have a minor leak on the Y pipe but its nothing crazy. If i was to build another LTx car (which may happen soon) I will definitely get another set!

[JCzNova]

LPP If you could PM any issues with previous test sets I can make sure to take extra notes and pics of those specifics during the install.

All: FEDEX has they "out for delivery" now!

[Blackbird96WS6]

Sweet! I take it you have the next couple days set aside for nothing but header install and feedback reporting? :) Can't wait to see the reworked ones!

[JCzNova]

Hoping to be starting on it Sunday. Depends how much if this weekend I have to work because no one else has a forklift license or CDL.

[englundjd]

Hoping to be starting on it Sunday. Depends how much if this weekend I have to work because no one else has a forklift license or CDL.

Good job security haha

[Ugod02010]

Since I'm starting my new project and had to cut my exhaust to pieces to remove it I'm gonna need a whole new exhaust. And longtubes are the start!!! And preferably ones that aren't $1100

[JCzNova]

Since I'm starting my new project and had to cut my exhaust to pieces to remove it I'm gonna need a whole new exhaust. And longtubes are the start!!! And preferably ones that aren't $1100

I tell you what, I am liking these more everytime I look at them. Hoping to be completely installed Friday or Saturday. Waiting on gaskets now.

[popo8]

Thats an idea... maybe headers and stuff shoould be sold... just headers... or headers and y.... or full exhaust (if avail), but no matter what there should be an INSTALL KIT for an additional cost that comes with them.

That way there is no down time for install. Like a bunch of gaskets (depending on how much of the system is ordered) and different locking fastners, etc....

Just an idea. That way the exhaust manufacturer is a one stop shop....

[Blackbird96WS6]

Thats an idea... maybe headers and stuff shoould be sold... just headers... or headers and y.... or full exhaust (if avail), but no matter what there should be an INSTALL KIT for an additional cost that comes with them.

That way there is no down time for install. Like a bunch of gaskets (depending on how much of the system is ordered) and different locking fastners, etc....

Just an idea. That way the exhaust manufacturer is a one stop shop....

+1 to this! I love one stop shopping. An install kit of the best gaskets and header bolts would be awesome, like the Percy split-locking header bolts or grade 8 bolts or w/e.

[LPP]

Extra's add dollars to the price.
It's usually cheaper to get the extra's local.

We will be offering just the headers if that's all you want.
Or the Headers and Y combo.
We are also working on getting our true dual setup back in stock.
So you can buy just the headers, or the headers and Y, or the headers and our true dual setup.

[popo8]

of course...thats why i was suggesting it as option packages.

Me personally...Id pay a few extra simply for the convenience of getting everything at once.




MEMBER @ LTXtech.com

[Z4Performance]

When will these be ready to order?

[Soxxpuppet]

of course...thats why i was suggesting it as option packages.

Me personally...Id pay a few extra simply for the convenience of getting everything at once.


You and everybody else too! Its nice to not have to worry about shipping from different sources or something like that. As stated before, the less downtime the better.

[JCzNova]

My headers and Y are on the car and feedback sent to LPP. Awaiting a response to see what additional pics and information are wanted, and I will make sure to turn that info around in less than 24-hours!

http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/null_zpsbe0b825a.jpg (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/null_zpsbe0b825a.jpg.html)

http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/null_zpsffa74a47.jpg (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/null_zpsffa74a47.jpg.html)

[Blackbird96WS6]

Badass dude! Thank you for getting this done ASAP for the rest of us. :cheers:

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[JCzNova]

Badass dude! Thank you for getting this done ASAP for the rest of us. :cheers:

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

It was my pleasure. Whatever helps to get these to production for everyone. I really like them and think the price is going to be amazing with the quality being right there with those $950+ companies.

Standing by ready for any other info LPP needs.

[LPP]

You can go ahead and post up the minor issue pictures on here so I can get feedback from the other members.
The couple of spots where they touch the K-member has always been hit and miss with our last version. There is just too much variance in the way GM puts them together.
Some cars they hit some they don't. It is just the flange they hit and it doesn't hurt to grind a little off if you have to.
We can try and tweet them a little more but it may cause an issue somewhere else. This would also delay production longer because we would have to do another test set.

so what does everyone think. Do another test set or go into production with a couple of minor issues that you may or may not have?

[Blackbird96WS6]

Is the flange possibly touching the only thing? What other minor issues are there still?

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[JCzNova]

Not really issues that I think changes and a test set would solve, as LPP has stated. Also, issues that ARE going to be different with every car. I will highlight the small issues I had in BOLD, and label each with a picture number.



The install went pretty smooth. I started on ramps for the first few bolts, then decided to move to a lift before I got too deep on it. I don't think I would try it on jackstands or ramps for the full install.

Driver Side:
-Had to remove the lower connection point of the steering shaft. Left the top attached and set it to the side.
-Small rub from the goofy bracket of the rag joint on the header. Can be bent or removed to clear. (PICTURE #1)
-Had to remove the oil pressure sending unit.
-Did not have to remove the coolant temp sensor from the head.
-Did remove spark plugs but it would have cleared with them in.
-Came up from the bottom for the header, and had plenty of room.
-I used grade 8 locking header bolts, and have ordered a set with an internal allen head which I will provide you more feedback once they arrive.
-For those that use the locking ones I used, they are about 1-1/2" too long, and I was unable to get the 3/8" wrench on some of them since they are 12-point and require the box end wrench.
-Primary #5, bolt hole #4 on header flange needs a little larger dent to accommodate the bolt head. (This will change depending on what bolts you use)

Passenger Side:
-Had to remove starter.
-Had to remove spark plugs.
-Had to remove oil dipstick.
-Also came up from the bottom on this side.
-Header is barely touching frame in one spot. (Picture #2)

Y-Pipe:
-Went together pretty smoothly, and the flattened out section on the driver side was just the right amount for clearance.
-It was touching my bottom brake line there, which I bent up a little. Can be adjusted down with the nice slip fit connections, which should leave plenty of clearance.
-Had to remove factory hanger bracket that is on the passenger side of the transmission, held on with the torque arm bolts. The Y hits it, and it is no longer needed.


Any other questions or specific pics folks would like, I have the car parked at my work so I can get pics in about a 24-hour turn around.

Jeremy

http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/ragjoint_zps9b2975ad.png (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/ragjoint_zps9b2975ad.png.html)

http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/passengerframerail_zps9dd6cc1d.png (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/passengerframerail_zps9dd6cc1d.png.html)

[popo8]

EXCELLENT JCZ!!!

[SMok3 Em A11]

Looks like they fit pretty well I wouldn't fret about either of these issues if it were my car I'd just break out the grinder and these issues would no long be issues LOL

[JCzNova]

Looks like they fit pretty well I wouldn't fret about either of these issues if it were my car I'd just break out the grinder and these issues would no long be issues LOL

That's my plan, AND why I would vote to move forward with production. If I had major issues anywhere I wouldn't suggest LPP to put their money into making a run.

[Blackbird96WS6]

Hell yeah, those don't sound like issues for them to worry about making another test run to fix. So basically a grinder and careful selection of bolts is all that's needed to ensure a great fit. Sounds good to me, put these babies into production!

[Dave]

X3
I need a set under the tree this Christmas!

[JCzNova]

Took some ground clearance photos yesterday, but photobucket had some maintenance excuse when I got home.... SO here they are:

From driver side under the front portion of the door:
http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1573_zps7887eba5.jpg (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1573_zps7887eba5.jpg.html)

From front under bumper:
http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1574_zps4d620cc9.jpg (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1574_zps4d620cc9.jpg.html)

Passenger side header from under front bumper:
http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1575_zps905e39e1.jpg (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1575_zps905e39e1.jpg.html)


Driver side header from under front bumper:
http://i1011.photobucket.com/albums/af236/JKZJK/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1576_zpsf5590207.jpg (http://s1011.photobucket.com/user/JKZJK/media/JCz%20Z28/LPP%20Headers%20and%20Y/IMG_1576_zpsf5590207.jpg.html)

[LPP]

One thing we did do was try hard to make them tuck as tight to the bottom of the car as possible to give as much ground clearance as possible.

[Blackbird96WS6]

Those definitely have a lot of clearance, they look awesome.

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[JCzNova]

I will measure the clearance tomorrow as I need to get a few other measurements.

This height will be stock car on
275/35-18's.

[Z4Performance]

Looks like they need to be put into production. Sign me up for a set before I order the OBX headers.

[LPP]

25370

These? There is so many things I can say about these but I'll hold back some:)
For one look at the welds. They are yellow. Why because they don't purge weld with argon.
You see the black around the yellow that's where they overheated the stainless and it will crack over time.
If it's yellow with black it's going to fail.
And no High velocity merge collector with merge spike:(
And no Y-pipe for them either.
That's all for now:)

[LPP]

25371

Here's what purge welds and the high velocity merge look like on polished headers:)

[JCzNova]

LPP

Sent you the measurements on the contact locations.

Did not get to measure the ground clearance as putting the car back on the ground and it was pouring down rain today.

[popo8]

LPP

Sent you the measurements on the contact locations.

Did not get to measure the ground clearance as putting the car back on the ground and it was pouring down rain today.

great coverage of the instal man!

MEMBER @ LTXtech.com

[Z4Performance]

All I know is I am getting close to needing a set and if they don't going in production soon I will be getting a different brand.

[LPP]

I talked to our manufacture today and they are telling me 45 days.
Maybe sooner because they always buffer the dates some.

[popo8]

45 days is not bad. Is that when members can expect them to be avail...or the beginning of production?

LTXtech.com is my drug.

[LPP]

They are in production as we speak:)

[popo8]

Wonderful news!

LTXtech.com is my drug.

[Z4Performance]

Can we preorder? LOL I am willing to put some money down for a set. Let me know.

[Ugod02010]

I'm sure it's in the post somewhere but we are in page 23. How much? I need basically a whole new exhaust system.

[JCzNova]

I'm sure it's in the post somewhere but we are in page 23. How much? I need basically a whole new exhaust system.

I don't think it was in this thread, but I think another thread was talking about $575...?

Don't quote me on that :D

[Ugod02010]

That's not to bad at all. Gonna have to see how the finances work out for me when these are ready to roll! they look better than some headers I've seen at almost double the price!

[Blackbird96WS6]

I don't think it was in this thread, but I think another thread was talking about $575...?

Don't quote me on that :D

I recall about that price, too. Can't remember what thread, though. Definitely will be jumping on these once they're on sale, regardless.

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[LPP]

Sorry we don't have any pricing worked out yet.
I will tell you for those that forgot of don't know the last run we did a few years ago the prices were:
Headers and Y 550
Headers alone 450
Y alone 160

We are hoping to not increase the price any more than we have too.
Buttt the cost of stainless has gone up:(
And other production cost have gone up also:(
And we did re-do all the jigs twice and make several test sets.

[JCzNova]

Sorry we don't have any pricing worked out yet.
I will tell you for those that forgot of don't know the last run we did a few years ago the prices were:
Headers and Y 550
Headers alone 450
Y alone 160

We are hoping to not increase the price any more than we have too.
Buttt the cost of stainless has gone up:(
And other production cost have gone up also:(
And we did re-do all the jigs twice and make several test sets.

I'm sure the price is still going to beat Kook's by a long shot, and the quality and fit is right there!

Thanks for the updates.

[Blackbird96WS6]

Sorry we don't have any pricing worked out yet.
I will tell you for those that forgot of don't know the last run we did a few years ago the prices were:
Headers and Y 550
Headers alone 450
Y alone 160

We are hoping to not increase the price any more than we have too.
Buttt the cost of stainless has gone up:(
And other production cost have gone up also:(
And we did re-do all the jigs twice and make several test sets.

Even if you guys have to bump it up from $550 a bit, it's still a killer price for the headers and Y in my book for the fit and quality. Btw, does that price include shipping or is that separate from those projected prices? I'm already saving up now to grab a set when you release them.

[englundjd]

i have money waiting for some long tubes
:beer:

[Soxxpuppet]

Even if the headers alone were $600 its still a great deal! I just wish mine had the merge spikes :\ lol oh well. Better luck next time! Congrats LPP for finally getting them done! :cheers:

[Down]

Any idea when the true duals will be available again? Need a time frame so I can remove my quad tipped Magnaflow exhaust. It looks nice, just incredibly quiet for me.....


-Down

[LPP]

Ok our manufacturer is telling me they will have 40 sets ready to ship in 2 to 3 weeks.
Sorry for the delay but with the holidays production got delayed some.
So I'm going to offer the first 40 sets to ltxtech members fist before I put them up for sale on our website just because you guys have been very supportive.
The headers and Y will be $650 with Free shipping to the continental US.
If you want to reserve a set just send an email to lpparts@verizon.net and put LT1 reserve in the subject line.
I'll post back on this thread if we reach the 40 mark.

Thanks for all your support, Carl

[95 blackbird]

E-mail sent!!!!!!!!!

[Blackbird96WS6]

Reserve email sent! :D

[JCzNova]

AWESOME!!! Thanks LPP.

[Soxxpuppet]

:finger: Fantastic to hear LPP!!!!

[englundjd]

LPP you have an email :)

[LPP]

Well all this interest and we only have 3 people wanting to reserve a set:(

[Sahara54]

Well all this interest and we only have 3 people wanting to reserve a set:(

Gotta remember...Very few can throw down that amount of money that quickly. The interest is there and the LTx community needs good products like your to keep us relevant as a great platform. Taxes are coming up and you'll prob have more than a few orders from that.

[LPP]

We are not asking for payments at this time.
This is just to see what kind of demand there is for them.
We will have 40 sets ready to go but need to know if we need to remain tooled up to make more.
Our usually run of headers is 100 sets but we have been burned in the past making 100 sets because everyone said they wanted them but then it took a year to sell them all.
We operate on a very tight budget and every time we put too much into one product it hurts us being able to make other products.
With all the interest shown in this thread I really though I would get 40 reservation really fast:(

[Blackbird96WS6]

popo8 Any chance you could drum up some traffic for this on the LTXTECH Facebook page? That should bring some more buyers to the table.

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[popo8]

Sure, I will post it over there.

[popo8]

Done.

[BlackWidowSS]

LPP, I will take a set. Not sure how fast I can get them because I have a few irons in the fire right now, but I have a set of you Gen 2's and I DEFINITELY want to upgrade to the Gen 3's!

[Hawk173]

I sent you guys a email, but stated I wasn't a member, I'm a member now, and add me to the list when these are ready!

[Blackbird96WS6]

Alrighty, in an effort to make sure this gets seen by everyone who showed interest in this throughout the life of this thread, I ran through all 23 pages and grabbed everyone's name who said they wanted a set, but hasn't said anything on here since the announcement to get on the reserve list. Time for a massive tag/mention list. :D

@mattgw86 (http://ltxtech.com/forums/member.php?u=1681) @SexyTransAm (http://ltxtech.com/forums/member.php?u=1389) @Kick's96Z (http://ltxtech.com/forums/member.php?5707-Kick-s96Z) @Tbird232ci (http://ltxtech.com/forums/member.php?u=1358) @Mangelby (http://ltxtech.com/forums/member.php?u=5702) @twgoodspeed (http://ltxtech.com/forums/member.php?u=5319) @SchaefZ28 (http://ltxtech.com/forums/member.php?u=868) @The Batman (http://ltxtech.com/forums/member.php?u=1113) @camar0corey (http://ltxtech.com/forums/member.php?u=150) @ThoR294 (http://ltxtech.com/forums/member.php?u=6204) @Madman337 (http://ltxtech.com/forums/member.php?u=5076) @absi (http://ltxtech.com/forums/member.php?u=5720) @spikester7878 (http://ltxtech.com/forums/member.php?u=1708) @Fixxer99TA (http://ltxtech.com/forums/member.php?u=16) @dstrick8 (http://ltxtech.com/forums/member.php?u=5448) @casey20000007 (http://ltxtech.com/forums/member.php?u=4691) @KaGe (http://ltxtech.com/forums/member.php?u=6538) @beaver50 (http://ltxtech.com/forums/member.php?u=6189) @Louvit (http://ltxtech.com/forums/member.php?u=462) @Shanle929 (http://ltxtech.com/forums/member.php?u=6583) @Homerandabe69 (http://ltxtech.com/forums/member.php?u=4890) @fleetfeet2004 (http://ltxtech.com/forums/member.php?u=5081) @Ugod02010 (http://ltxtech.com/forums/member.php?u=6425) @Z4Performance (http://ltxtech.com/forums/member.php?u=6125) @Dave (http://ltxtech.com/forums/member.php?u=5439)

Time to put your money where your mouth is, boys!

[Shanle929]

I'm down. Where do I reserve a set at? Your website?

[englundjd]

ohh boy here we go lol

[Blackbird96WS6]

I'm down. Where do I reserve a set at? Your website?


Ok our manufacturer is telling me they will have 40 sets ready to ship in 2 to 3 weeks.
Sorry for the delay but with the holidays production got delayed some.
So I'm going to offer the first 40 sets to ltxtech members fist before I put them up for sale on our website just because you guys have been very supportive.
The headers and Y will be $650 with Free shipping to the continental US.
If you want to reserve a set just send an email to lpparts@verizon.net and put LT1 reserve in the subject line.
I'll post back on this thread if we reach the 40 mark.

Thanks for all your support, Carl

:cheers:

[casey20000007]

Ok I have not been following that close but how much did they turn put to be and what was the fitment issues?


Smoke tires not drugs

[casey20000007]

Never mind is just saw previous post DOH!!!!!


Smoke tires not drugs

[ThoR294]

I would have loved a set before, but I just moved out so funds are super tight :(

[spikester7878]

im down, but willl most likely wait till tax returns or my new job. being medically retired from the army sacked my wallet haha. How much without the y I am running true duals

[spikester7878]

email sent

[Ugod02010]

Email sent!!

[BlackWidowSS]

Email Sent

[The Batman]

I would have loved a set of these a couple years ago. I barely missed out on the first batch, and I dont remember why I couldnt get in on the second batch. However, I moved on...I was the one who took a leap of faith and bought the OBX headers that nobody was willing to try. Once I recieved them, I started a thread on LS1Tech. Then the thread got very large and everyone started buying them until they went out of stock everywhere. needless to say, I wont be in on a set of the LPP's. I would like to thank Blackbird for taking the time to message everyone that may have been interested.:D

[Camaro350z2897]

yes is there a price without a Y as well? contemplating dual

[popo8]

Much intrest on the FB page LPP.

LTXtech.com is my drug.

[Dave]

Email sent

Sent from my SGH-I337M using Tapatalk

[Z4Performance]

Yes I still want a set. I just don't get on the site everyday. Glad they finally are ready.. just like everyone else going take a few weeks to come up with the cash but yes I want a set.

[Blackbird96WS6]

Yes I still want a set. I just don't get on the site everyday. Glad they finally are ready.. just like everyone else going take a few weeks to come up with the cash but yes I want a set.

No worries, as he said, he's not taking payment just yet. Just wanted us to email him showing interest in purchasing soon so he has an idea of how many he will be selling.

Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2

[New2LT]

These are stainless? What about underhood temperatures? My headers are ceramic coated now. Are they direct bolt ons, I already have a Y-Pipe too.

[meissen]

If we need more interest, tag me (I don't follow this thread that closely) and I'll go through and tag all 97 people who voted "Yes" in the poll... :lol:

[Blackbird96WS6]

If we need more interest, tag me (I don't follow this thread that closely) and I'll go through and tag all 97 people who voted "Yes" in the poll... :lol:

Lol I already went through and tagged everyone who mentioned interest in the first 23 pages, but I only went off comments only. This might not be a bad idea, though, who knows how many voted but never commented. I say go for it lol. meissen

[jlo]

have all updates/upgrades been made like the merge spikes. I know they where going to rework the Y to be more free flowing. I want to know if the changes have been made before I commit...Please let me know asap so I can pre-order them.

[meissen]

And the mass e-mail - @1fastz28 (http://ltxtech.com/forums/member.php?u=6201), @2EVUL4U (http://ltxtech.com/forums/member.php?u=4361), @93fs (http://ltxtech.com/forums/member.php?u=5826), @94Blackbird (http://ltxtech.com/forums/member.php?u=1623), @95 blackbird (http://ltxtech.com/forums/member.php?u=4531), @95camarslo (http://ltxtech.com/forums/member.php?u=4259), @96LT1Z28 (http://ltxtech.com/forums/member.php?u=3523), @97QuasarBlueTA (http://ltxtech.com/forums/member.php?u=1513), @97Z4CZ28 (http://ltxtech.com/forums/member.php?u=4661), @9t4zee28 (http://ltxtech.com/forums/member.php?u=5645), @absi (http://ltxtech.com/forums/member.php?u=5720), @AllBlackLt1 (http://ltxtech.com/forums/member.php?u=4715), @AZ2ENVY (http://ltxtech.com/forums/member.php?u=71), @beaver50 (http://ltxtech.com/forums/member.php?u=6189), @Berk (http://ltxtech.com/forums/member.php?u=6280), @bigtoyz (http://ltxtech.com/forums/member.php?u=5230), @birdie2000 (http://ltxtech.com/forums/member.php?u=449), @Blackbird96WS6 (http://ltxtech.com/forums/member.php?u=5321), @BlackWidowSS (http://ltxtech.com/forums/member.php?u=1221), @blue85350 (http://ltxtech.com/forums/member.php?u=1375), @bsgreenz (http://ltxtech.com/forums/member.php?u=464), @camar0corey (http://ltxtech.com/forums/member.php?u=150), @Camaro350z2897 (http://ltxtech.com/forums/member.php?u=918), @CamaroZGuy (http://ltxtech.com/forums/member.php?u=275), @casey20000007 (http://ltxtech.com/forums/member.php?u=4691), @Catmaigne (http://ltxtech.com/forums/member.php?u=4875), @Chopstix (http://ltxtech.com/forums/member.php?u=241), @Chrizar (http://ltxtech.com/forums/member.php?u=6186), creedmiller, @devonsZ28 (http://ltxtech.com/forums/member.php?u=749), @doferrell (http://ltxtech.com/forums/member.php?u=3679), @downrise14 (http://ltxtech.com/forums/member.php?u=6709), @dstrick8 (http://ltxtech.com/forums/member.php?u=5448), @duff man (http://ltxtech.com/forums/member.php?u=228), @englundjd (http://ltxtech.com/forums/member.php?u=4594), @Fastbird (http://ltxtech.com/forums/member.php?u=2), @Fazz73jr (http://ltxtech.com/forums/member.php?u=2679), @Featherburner (http://ltxtech.com/forums/member.php?u=52), @Fixxer99TA (http://ltxtech.com/forums/member.php?u=16), @FlatBlackZ28 (http://ltxtech.com/forums/member.php?u=4810), @fleetfeet2004 (http://ltxtech.com/forums/member.php?u=5081), @GAV (http://ltxtech.com/forums/member.php?u=5394), @Hawk173 (http://ltxtech.com/forums/member.php?u=7075), @Homerandabe69 (http://ltxtech.com/forums/member.php?u=4890), @HotRodV6 (http://ltxtech.com/forums/member.php?u=3541), @jaymz1967 (http://ltxtech.com/forums/member.php?u=4096), @Jayz28 (http://ltxtech.com/forums/member.php?u=2970), @jb442 (http://ltxtech.com/forums/member.php?u=2547), @JCZNova (http://ltxtech.com/forums/member.php?u=4556), @jderry (http://ltxtech.com/forums/member.php?u=5624), @jessehotrod (http://ltxtech.com/forums/member.php?u=79), @jlo (http://ltxtech.com/forums/member.php?u=4761), @JPack (http://ltxtech.com/forums/member.php?u=562), @KaGe (http://ltxtech.com/forums/member.php?u=6538), @kgkern01 (http://ltxtech.com/forums/member.php?u=3025), @Kick's96Z (http://ltxtech.com/forums/member.php?u=5707), @Louvit (http://ltxtech.com/forums/member.php?u=462), @LPP (http://ltxtech.com/forums/member.php?u=5299), @Madman337 (http://ltxtech.com/forums/member.php?u=5076), @Manbearpig (http://ltxtech.com/forums/member.php?u=5151), matt95Z28, @mattgw86 (http://ltxtech.com/forums/member.php?u=1681), @Matts94z28 (http://ltxtech.com/forums/member.php?u=211), @MEAN LT1 (http://ltxtech.com/forums/member.php?u=286), @meissen (http://ltxtech.com/forums/member.php?u=509), @MI6TA (http://ltxtech.com/forums/member.php?u=6851), @mike (http://ltxtech.com/forums/member.php?u=5454), @nascarnate326 (http://ltxtech.com/forums/member.php?u=1464), @New2LT (http://ltxtech.com/forums/member.php?u=6743), @Noah's95z28 (http://ltxtech.com/forums/member.php?u=1093), @OBD1 Kenobi (http://ltxtech.com/forums/member.php?u=6032), @old93camaro (http://ltxtech.com/forums/member.php?u=835), @Perry (http://ltxtech.com/forums/member.php?u=6546), @popo8 (http://ltxtech.com/forums/member.php?u=1330), @projectbirdshot (http://ltxtech.com/forums/member.php?u=5786), @rabbitms (http://ltxtech.com/forums/member.php?u=5282), @Reaper97z (http://ltxtech.com/forums/member.php?u=432), @Rjpolakie (http://ltxtech.com/forums/member.php?u=5880), @Sahara54 (http://ltxtech.com/forums/member.php?u=4842), @scarfache (http://ltxtech.com/forums/member.php?u=1812), @SchaefZ28 (http://ltxtech.com/forums/member.php?u=868), @schtznhfr (http://ltxtech.com/forums/member.php?u=4076), @Shanle929 (http://ltxtech.com/forums/member.php?u=6583), @Soxxpuppet (http://ltxtech.com/forums/member.php?u=3590), @spikester7878 (http://ltxtech.com/forums/member.php?u=1708), @Tbird232ci (http://ltxtech.com/forums/member.php?u=1358), @The Batman (http://ltxtech.com/forums/member.php?u=1113), ThoR294, @Tony Shepherd (http://ltxtech.com/forums/member.php?u=24), TrybalRage, @TubbyZ28 (http://ltxtech.com/forums/member.php?u=5592), @XSFTLBS (http://ltxtech.com/forums/member.php?u=5279), @Z4Performance (http://ltxtech.com/forums/member.php?u=6125), @zboy2012 (http://ltxtech.com/forums/member.php?u=5557), @zooguy (http://ltxtech.com/forums/member.php?u=2003)