Windage tray

[ZOHAN]

Was planning on a stock oil pan and windage tray for my setup. 383 w/ 15-20psi, anyone recommend something else? Bigger pan/ dif windage tray?

Sent from my SPH-L710 using Tapatalk 2

[Ghettogmc23]

I run the v8 swap 4wd s10 pan from Canton. 7 quarts, has it's own dipstick setup on the drivers side that can be used or plugged, and has a built in windage screen. Plus since it was made to clear the diff it's flat until it gets to the pickup and has a huge well on it. Just an option, although idk how it would fit an Fbody, ill vouch for their quality.

[Sahara54]

I ended up running a flat Moroso windage tray cut down to factory size to fit in and under the stock pan. My rod bolts where contacting the factory windage tray during rotation.

[ZOHAN]

Ok, started assembly and trying to figure this out, with this canton oil pan, do I need a windage tray since it is baffled?

Making you silky smooth...

[1sickta]

I've been running the B&B pan for 3 years. Only complaint I had was it was full of weld splatter. I had to tap and clean on it for a good bit of time.

[1sickta]

http://www.jegs.com/i/B-B/128/91089/10002/-1?parentProductId=746460