QA1 275lb front, Stock v6 rear (springs)

[draggin97s10]

Who's running this set up? How does it work? This will be paired with kyb adjustable's that are on the car now. The car began in a different direction then it is going now. It has sportline springs on it now and they are just terrible. Any input would be appreciated. Thanks

ps car is a bolt on m6

[Chopstix]

I am running the Qa1 275# fronts with OE V8 springs on the rear, with QA1 adjustables on each corner...works well for me...I run the rear suspension fairly stiff on compression....I am a believer in the "girls squat race cars dont philosophy"

[draggin97s10]

I am running the Qa1 275# fronts with OE V8 springs on the rear, with QA1 adjustables on each corner...works well for me...I run the rear suspension fairly stiff on compression....I am a believer in the "girls squat race cars dont philosophy"

Thanks for the input. Yes i am a believer the same way. I ran my shock setting the same way at the track...loose in the front and stiff in the rear. But the springs on the car now really allow no weight transfer and have terrible spring rate.

Will eventually go to QA1's but for now the kyb's will do.

Is the front lower then it would be stock with the 275 QA1's?

[Chopstix]

that I really dont know as the QA1 are adjustable ride height....I switched from the sportlines as well

[draggin97s10]

I'm guessing they'll ride about stock height, which is fine. Down the road QA1's will fix that.