tt383lt1
12-02-2012, 07:57 PM
here is the list
pull engine.
tearing down the engine.
repowercoating the engine.
ceramic coat the exhaust.
wrap the exhaust pipes.
turbo blankets.
install a new radiator and move it down so my cold pipe can go over it. ( in the progress)
cut out uppper and lower radiator core supports -------------------------(DONE)
weld new tubular upper and lower radiatior core support. ---------( in the progrees)
reroute/make my cold side work for over the radiator.
paint engine bay.
put it all back together
interior is
pulll the roll cage out
install the heaterbox and dash.
make the stock heater box fit without going into the engine bay.
weld up everthing so theres no holes. ( 6 speed, wires ,ect holes)
dynomate the entire car.
make some carpet for it
install new cage.
paint new cage.
move electrical fuse box so i can install the heater box
as of right now i just cut out the upper core and the bottom core supoort completely out. and made the bottom one so far. and mounted the new radiator and fan setup.
pull engine.
tearing down the engine.
repowercoating the engine.
ceramic coat the exhaust.
wrap the exhaust pipes.
turbo blankets.
install a new radiator and move it down so my cold pipe can go over it. ( in the progress)
cut out uppper and lower radiator core supports -------------------------(DONE)
weld new tubular upper and lower radiatior core support. ---------( in the progrees)
reroute/make my cold side work for over the radiator.
paint engine bay.
put it all back together
interior is
pulll the roll cage out
install the heaterbox and dash.
make the stock heater box fit without going into the engine bay.
weld up everthing so theres no holes. ( 6 speed, wires ,ect holes)
dynomate the entire car.
make some carpet for it
install new cage.
paint new cage.
move electrical fuse box so i can install the heater box
as of right now i just cut out the upper core and the bottom core supoort completely out. and made the bottom one so far. and mounted the new radiator and fan setup.