Sahara54
11-27-2012, 04:06 AM
Alright, since I have the Forged 355 safe and sound in my garage; the original 355 I built is for sale.
It was originally a 97' block with around 120k on the engine. It was tanked, fluxed and castings cleaned up. It was bored .030 over and decked .010. It has the factory crank but was polished and balance checked. Rods are factory 94' rods, reconditioned and honed with ARP rod bolts in place. Pistons Speed Pro hypereutectic's with moly rings gapped to .018 to .020. Rods and piston were weight balanced. Factory 2 bolt mains have ARP Studs with a larger Moroso windage tray. All bearings are Sealed Power bearings. All Bolts/Stud have been torqued to ARP specs w/ ARP ultra torque lube. Lucas assembly lube was also used.
No Cam is included, but I'll throw my stock cam in if needed.
Build thread can be seen here: http://www.ltxtech.com/forums/showthread.php?19951-Sahara54-s-Formula-build-thread (http://ltxtech.com/forums/showthread.php?19951-Sahara54-s-Formula-build-thread)
1298912990129911299212993
Note: The white on the block is from the tanking/flux. It is surgically clean. Block has now been painted black with engine paint.
SOLD!!!!
Would prefer local pick up but I'll discuss shipping with buyer if needed.
It was originally a 97' block with around 120k on the engine. It was tanked, fluxed and castings cleaned up. It was bored .030 over and decked .010. It has the factory crank but was polished and balance checked. Rods are factory 94' rods, reconditioned and honed with ARP rod bolts in place. Pistons Speed Pro hypereutectic's with moly rings gapped to .018 to .020. Rods and piston were weight balanced. Factory 2 bolt mains have ARP Studs with a larger Moroso windage tray. All bearings are Sealed Power bearings. All Bolts/Stud have been torqued to ARP specs w/ ARP ultra torque lube. Lucas assembly lube was also used.
No Cam is included, but I'll throw my stock cam in if needed.
Build thread can be seen here: http://www.ltxtech.com/forums/showthread.php?19951-Sahara54-s-Formula-build-thread (http://ltxtech.com/forums/showthread.php?19951-Sahara54-s-Formula-build-thread)
1298912990129911299212993
Note: The white on the block is from the tanking/flux. It is surgically clean. Block has now been painted black with engine paint.
SOLD!!!!
Would prefer local pick up but I'll discuss shipping with buyer if needed.