bowtiekid
11-19-2008, 08:44 PM
Hey guys. Well Im going to switch to an LS setup in my car so Im parting out the bolt ons and anything else you guys might need. :nod:
ALL PRICES ARE OBO! and Im setting my paypal up after I make this thread then Ill edit the post with the info.
Paypal is x90_2@yahoo.com
I have a complete delteq system. Wiring, boxes, modules everything. "opti-box", igntion module, and 1 coil are new. 350 + shipping
http://i36.tinypic.com/2dwh6t.jpg
http://i34.tinypic.com/16ljpc0.jpg
http://i33.tinypic.com/2cr83tf.jpg
http://i37.tinypic.com/34fy0m0.jpg
I have a 94+ intake manifold. Its painted black and for the right price Ill include everything, sensors, rails, injectors. I also have 12pt intake mani bolts. Toss up some offers :chug:
http://i38.tinypic.com/pvrsw.jpg
Meziere EWP for sale. Has maybe ~35 hours on it. And let me tell you is it a nice unit. I can sell it already assembled onto my housing or I can ship it seperatly. Just EWP 180 + Shipping, EWP+HOUSING 230 + shipping
http://i33.tinypic.com/20ianms.jpg
http://i37.tinypic.com/xeh17c.jpg
I have a set of Trick flow guideplates and ARP studs. The studs have seen track use and street racing. The guideplates have maybe ~550 miles.
10 + shipping for guideplates and 25 + shipping for studs.
http://i37.tinypic.com/333ajkm.jpg
I have pacesetter headers. Painted white with 2000* paint. Lil dirty but they have never leaked. Straight flanges. Will include ARP header bolts. 200 + shipping
http://i38.tinypic.com/2n7ij2q.jpg
Lightly used almost new Autolite Remanfd Starter. its probably only 2 months old and most of that time it was sitting. 120 + shipping
http://i34.tinypic.com/2lsbrs2.jpg
Autolite Remanfd Alternator. Its about 1 year old and its still going strong. I get about 17v upon a cold start. never let me down. 75 + shipping
http://i37.tinypic.com/25zkmmv.jpg
Trickflow Intake elbow. Its also painted white. Its missing the grommet for the opti-spark vent. Comes with all clamps and hoses. 40 + shipping
http://i38.tinypic.com/2ltq5vt.jpg
95 engine harness. Should work with 94's also. Almost every sensor plug has been replaced. I went through the whole harness and replaced wires and connectors as needed. 02's are extended so no need for extentions. Moved the grounds to one easy place. Only connector that needs to be replaced is the coolant temp sensor in the head. Thats it. asking 120 + shipping
http://i38.tinypic.com/2rdg5e8.jpg
http://i35.tinypic.com/2dj2znr.jpg
Ive got 2 pcms:
One pcm starts and idles my car but wont shift it and makes the gauge cluster go crazy as far as speedo and tach. I was told it was for a 95 but im only asking 60 + shipping
Second pcm is tuned by Ion and has egr disable, AIR disabled, speedlimiter disabled, desensitized the knock sensor, revlimit set to 6k and 91 octane required. 95 + shipping
If there is anything else you see in the pics you want. Tell me and I will take it off for you. Also willing to pull the heads and send those as well. Let me know what you see.
Thanks for looking guys.
-mark
ALL PRICES ARE OBO! and Im setting my paypal up after I make this thread then Ill edit the post with the info.
Paypal is x90_2@yahoo.com
I have a complete delteq system. Wiring, boxes, modules everything. "opti-box", igntion module, and 1 coil are new. 350 + shipping
http://i36.tinypic.com/2dwh6t.jpg
http://i34.tinypic.com/16ljpc0.jpg
http://i33.tinypic.com/2cr83tf.jpg
http://i37.tinypic.com/34fy0m0.jpg
I have a 94+ intake manifold. Its painted black and for the right price Ill include everything, sensors, rails, injectors. I also have 12pt intake mani bolts. Toss up some offers :chug:
http://i38.tinypic.com/pvrsw.jpg
Meziere EWP for sale. Has maybe ~35 hours on it. And let me tell you is it a nice unit. I can sell it already assembled onto my housing or I can ship it seperatly. Just EWP 180 + Shipping, EWP+HOUSING 230 + shipping
http://i33.tinypic.com/20ianms.jpg
http://i37.tinypic.com/xeh17c.jpg
I have a set of Trick flow guideplates and ARP studs. The studs have seen track use and street racing. The guideplates have maybe ~550 miles.
10 + shipping for guideplates and 25 + shipping for studs.
http://i37.tinypic.com/333ajkm.jpg
I have pacesetter headers. Painted white with 2000* paint. Lil dirty but they have never leaked. Straight flanges. Will include ARP header bolts. 200 + shipping
http://i38.tinypic.com/2n7ij2q.jpg
Lightly used almost new Autolite Remanfd Starter. its probably only 2 months old and most of that time it was sitting. 120 + shipping
http://i34.tinypic.com/2lsbrs2.jpg
Autolite Remanfd Alternator. Its about 1 year old and its still going strong. I get about 17v upon a cold start. never let me down. 75 + shipping
http://i37.tinypic.com/25zkmmv.jpg
Trickflow Intake elbow. Its also painted white. Its missing the grommet for the opti-spark vent. Comes with all clamps and hoses. 40 + shipping
http://i38.tinypic.com/2ltq5vt.jpg
95 engine harness. Should work with 94's also. Almost every sensor plug has been replaced. I went through the whole harness and replaced wires and connectors as needed. 02's are extended so no need for extentions. Moved the grounds to one easy place. Only connector that needs to be replaced is the coolant temp sensor in the head. Thats it. asking 120 + shipping
http://i38.tinypic.com/2rdg5e8.jpg
http://i35.tinypic.com/2dj2znr.jpg
Ive got 2 pcms:
One pcm starts and idles my car but wont shift it and makes the gauge cluster go crazy as far as speedo and tach. I was told it was for a 95 but im only asking 60 + shipping
Second pcm is tuned by Ion and has egr disable, AIR disabled, speedlimiter disabled, desensitized the knock sensor, revlimit set to 6k and 91 octane required. 95 + shipping
If there is anything else you see in the pics you want. Tell me and I will take it off for you. Also willing to pull the heads and send those as well. Let me know what you see.
Thanks for looking guys.
-mark