Finalized 24x Conversion Harness Pictures

[green96ta]

Finished up this harness for a 1994 M6 car, it has the electric water pump wiring integrated. It will have a Omron relay on the connector when shipped. The only connection that the customer will have to make is the one for the water pump. There is an optional warning light and/or buzzer lead and connector included. You will see the extra connector that was added right next to c210, c220, and c230. Just simply connect the pigtail and wire up your light, if your pump fails or the fuse blows the light glows! HA!

Some other things you will notice about the harness
-Factory F-Body Specific Grommet Included in the factory location
-GM Color Codes
-All Delphi Connectors, Terminals, and Seals
-Quality Loom
-TXL wire just like factory
-ALL ground and power splices are CRIMPED and SOLDERED, then sealed with adhesive lined heat shrink.
-EWP wiring is concealed and the fuse/Relay will mount below the pcm out of sight.
-Optimized wire lengths for long tube headers, and C100 was made longer just in case the customer wants to do the wire hide mod.

Some other things to note- I can integrate other things into new harnesses if you want. Like nitrous wiring, the EWP wiring, and many other things. Just ask and ill do my best to accommodate you.

http://i293.photobucket.com/albums/mm48/wildbill_2/100_1134.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1135.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1136.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1137.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1138.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1139.jpg

[lttransam]

Awesome looking harness, can't wait to get the ball rolling on mine soon!

Sent from my SCH-I405

[Joker Z28]

Looks sweet.

[popo8]

....There is an optional warning light and/or buzzer lead and connector included. You will see the extra connector that was added right next to c210, c220, and c230. Just simply connect the pigtail and wire up your light, if your pump fails or the fuse blows the light glows! HA!
....

What a great safety feature!

[red_z28]

Looks great. But I knew it would, nice work!!

[Badbird_96]

Looks nice man yesterday I gave a guy the card you gave me at the shootout so hopefully he will give you a call and send some work your way.

[green96ta]

Thanks everyone, I really appreciate the kind words.

[Joker Z28]

I am just curious to know how many other people do I have in front of me?

[proace4]

Thanks again Bill. I am looking forward to putting it all on my car. I really like the customer service and all the questions answered, making the harness fit my car with my setup. I'm excited, gonna be a long weekend! lol

[Madman337]

Very nice work there, looks factory made.

[Fastbird]

Bill, I think you've found better than factory quality there. I don't remember any adhesive lined heat shrink on my harness while I was dissecting for the XFI. Looks really really top notch. If I ever get another LTx car to play with, I'm going this route for sure.

[green96ta]

Thanks guys! I really appreciate all of the kind words. I did change the routing a tad, so hopefully it will fit better than stock too. Casey if you read this please give me a call! Thanks again guys, its great to be a sponsor on this board.

[Neil350]

Looks awesome, I wish the 24X harness I had offered integrated wiring for my EWP.

[green96ta]

Looks awesome, I wish the 24X harness I had offered integrated wiring for my EWP.

What 24x harness do you have?

[harner]

Bill, it looks better than factory! You don't even have to describe your product, the pictures alone would sell itself. I am happy to go this route with my build.

[popo8]

Bill, it looks better than factory! You don't even have to describe your product, the pictures alone would sell itself. I am happy to go this route with my build.

you are 100% right...
In person speaks even 100x's more than the pics...

[green96ta]

You all are too kind!

[FSTFBDY]

looks good. I know your a 4thGen guy and your harness is too but Im sending you a PM on something I have in the works. for my car.

[BLK95-Z]

Maybe I missed it but how much do you charge to build a harness?

[CamaroZGuy]

From what i can tell from the pics it looks just as good as the harness from EFI....i just wish i would have known about this about a month sooner....

Looks awesome man!

Sent from my DROID RAZR using Tapatalk 2

[Andrew ws6]

That looks well built I need to get up with you and price one out.