PDA

View Full Version : BP Automotive Products and Services. A LTX Tech Appreciation Bonus for First 5!


green96ta
08-20-2012, 11:33 PM
Now that Im a sponsor on the site everyone is wanting to know what I offer. I offer a wide range of products, and if there is something that I dont offer, call me and I will either make it or source what you need. Thats what Im here for- to help make your project come together. Here is a list followed by some pictures, and keep checking back as I will add more products and pictures as I get spare time! Call Me with anything!! 270-805-1777

First and foremost on all wiring products OEM quality TXL wire and Corrugated Loom are used on my harnesses. I also use Delphi Crimp tools. When you purchase a harness from me its quality. Period. All connectors and terminals on the engine harness are Delphi. All fuse block terminals are crimped and soldered. All splices are Crimped and soldered, then sealed with adhesive lined Heat shrink. All connectors are labeled with easy to read professional labels.

All stand alone harnesses are made to be completely dis-connectable, just like a factory harness. This is what sets me apart from other Harnessing companies. The fuse block, dash harness, cruise harness (if DBW), and starter wire are all dis-connectable from the engine harness just like a factory f-body harness!

1. Biggest Item for LTX Customers is 24x conversion Kits. I can make brand new harnesses for the conversion starting at $600 depending on what all you want. It will be plug and play- just like a factory replacement.

2. The kit includes My coil brackets, GM Coil Harnesses, Delphi LS7 Coils, 0411 PCM, and I can build a New Harness or Re-Wire your old one.
- Re-Wire service for Harness costs $300. Entire kit with Re-Wire is $900 this includes a stock tuned 0411 PCM for 24x.
- Entirely New Kit starts at $1200 Depending on harness options chosen.
- That means after you purchase the Reluctor Kit from EFIConnection you will only have $1450-$1750 invested!
- You can save even more if your the DIY'er. I offer a diy kit for 100- so that would be $1250 Invested!
- These prices dont include plug wires, but Im working on that one!

3. I offer all kinds of extensions and pigtails!- From O2 extensions to LSX Coil extensions. Just call for whatever you need

4. LTX and LSX Stand Alone Harnessing. Putting a LSX or LTX into something different? I can re-wire a harness or build a new one! I also offer DIY fuse block kits just in case your gonna mod your own harness!! Many different versions available!

5. Hardware- I offer stainless hardware, such as intake bolts and so forth. Im still building the LTX kits, LSX kits are available.

6. Harnessing Parts- I can sell you wire by the foot, un-assembled connectors, etc. Whatever you need, just call me!

7. Nitrous Harnesses. You dont want to have to do all the wiring? Thats fine, I can make you a harness with all the relays and connectors you will need. I can make these in "cookie cutter" form or custom for you! All you got to do is call me.

8. If your local I offer nitrous refills!

As I think of more I will add it to this list.

As my appreciation for you reading all of that- and for the warm welcome the first 5 LTX tech members that make a purchase from me will receive 10% off whatever you purchase. A thank you from a grateful sponsor! Now here are some pics of some of my work!
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1099.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1100.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1105.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1106.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/DSC00157.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/DSC00156.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/108_2076.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/IMAG0047.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/IMAG0033.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1093.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1095.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1094.jpg
Tyler Wheat
08-24-2012, 09:41 PM
Glad you became a sponsor. I'm excited to see the stainless bolt kits! Maybe a conversion is in the future for me. At least if I decide, I know where to get them. I like the way these kits are being built.

Keep up the good work!
green96ta
08-24-2012, 10:32 PM
Glad you became a sponsor. I'm excited to see the stainless bolt kits! Maybe a conversion is in the future for me. At least if I decide, I know where to get them. I like the way these kits are being built.

Keep up the good work!

Thanks so much! I am hoping to have several sets of coil brackets with me, some coils, coil harnesses, and a 24x harness at the shootout so everyone can evaluate my work! Ill bring some other stuff too like extensions and some other goodies.


Some things that I am going to be finalizing and getting on the market-

c100 and c105 plug and play extension kit for the wire hide mod, no more extending wires.

LTCC plug and play kit- keeps you from cutting on your factory Harness.



And- IM ALWAYS OPEN TO SUGGESTIONS! Recommend something that I should build, and if it sells earn yourself some cash! Thats right! If you recommend something that I should build and it sells I will give you $.
Fastbird
08-25-2012, 01:15 PM
Doing some wiring work on the side myself, I have to say that I'm impressed with that I'm seeing.

So here's the question of the day for you. How much would a harness for a FAST XIM box cost, as I'm thinking of swapping to coils and hybridizing the setup using the XIM and EFI Connections components (reluctor and cam sensor). Also how much are the coil brackets? Do those have clearance for Metco oil fill adapters as I'm using 2x passenger valve covers and running adapters to -10an breather tank lines.
green96ta
08-25-2012, 01:59 PM
Doing some wiring work on the side myself, I have to say that I'm impressed with that I'm seeing.

So here's the question of the day for you. How much would a harness for a FAST XIM box cost, as I'm thinking of swapping to coils and hybridizing the setup using the XIM and EFI Connections components (reluctor and cam sensor). Also how much are the coil brackets? Do those have clearance for Metco oil fill adapters as I'm using 2x passenger valve covers and running adapters to -10an breather tank lines.

Are you going to be at the shootout with the car? Im trying to visualize what you got goin on as far as the breathers. Ill have some brackets at the shootout, among many other things too. But depending on coils used, my brackets will clear just about any setup besides factory traction control. HAHA
bsgreenz
08-25-2012, 02:07 PM
Did you ever figure out the issue with the coil brackets bolts holes not lining up with the coils?
bsgreenz
08-25-2012, 02:11 PM
Also i ended up swapping to the same valve cover you have in the picks and modded the brackets some more to sink valve cover bolt.
green96ta
08-25-2012, 03:39 PM
Did you ever figure out the issue with the coil brackets bolts holes not lining up with the coils?

Yes, the laser cutting company made a boo boo. I since redesigned the brackets a tad, I would be happy to send you a set of the new style since you got the only set that was miscut.
green96ta
08-25-2012, 03:41 PM
Also i ended up swapping to the same valve cover you have in the picks and modded the brackets some more to sink valve cover bolt.

Why didnt you use the bolts that come with the kit? I cant remember. That would have saved you the trouble of sinking the bolts.

Ahh I think I remember now, You have taller valve covers. Im still having trouble finding a 4.5-4.75 inch stainless button head bolt. I think the 4 inch bolts would have worked with your valve covers.

On a side note- they do look good on there! The newer style look even better. Ill get some pics up of the newer style. As with anything like this, its super hard to make something that will conform to the needs of the vastly different set-ups you see, but its good to have customers like you who are understanding of that and not giving up and just returning them.

My offer still stands. If you want a redesigned set, just call me. 270-805-1777.

Bill
Fastbird
08-25-2012, 04:30 PM
Are you going to be at the shootout with the car? Im trying to visualize what you got goin on as far as the breathers. Ill have some brackets at the shootout, among many other things too. But depending on coils used, my brackets will clear just about any setup besides factory traction control. HAHA

Unfortunately not with the car, and it's quite likely I won't be able to be there at all now.
bsgreenz
08-25-2012, 04:46 PM
Yeah i was running canton originally until the driver side header hit it ( front mount turbo set up ) and bought the same ones you show in the pictures, post some pics up of the new ones man, i might be interested.
green96ta
08-25-2012, 11:21 PM
Added pics to original post, and here they are too. The newest pictures of these brackets, along with the coils that I keep in stock. Complete kit is listed in the first post.

http://i293.photobucket.com/albums/mm48/wildbill_2/100_1099.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1100.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1105.jpg
http://i293.photobucket.com/albums/mm48/wildbill_2/100_1106.jpg
Chris
09-02-2012, 10:12 PM
Hey BP *I forgot your name :doh:* I am switching to an obd1 computer. Do you have a pigtail harness for an obd1 DLC under the dash?
green96ta
09-02-2012, 10:25 PM
Hey BP *I forgot your name :doh:* I am switching to an obd1 computer. Do you have a pigtail harness for an obd1 DLC under the dash?

Chris, my name is Bill. I can make you one, I do not normally stock the obd1 connector but ill just put one on the order for tuesday. Unless you want to be like a 95 and have the obd2 connector but be obd1
Chris
09-02-2012, 10:30 PM
Going to need an obd1 style, both cables I have now are that style shoot me a pm with the details

Sent from my Galaxy IIIs via Tapatalk
sick70malibu
09-02-2012, 11:43 PM
Wow I'm glad I found this thread. I will definitely be coming to you when.its time for a harness for the Chevelle.

Sent from My HTC Rezound
CamaroZGuy
09-02-2012, 11:54 PM
i will deff be interested in plug wire kits for 24x if you start making them....(making my own have kicked my ass! LOL)
popo8
09-03-2012, 12:04 AM
for those that were at the hotel after the SHOOTOUTand had a chance to examine BP's workmanship.... ITS 2ND TO NONE!


Larry (Popo8) Co-owner
LTXtech.com
green96ta
09-03-2012, 08:32 AM
Thaks guys! I really appreciate all the kind words that everyone had to say! I will start making plug wires, I just have to get caught back up on the harnessing. Then Ill start to source the parts and get set up to take care of the plug wires. Thanks for everything! It would be an honor to do a harness for your chevelle!