Feeler LTX part out

[red_z28]

Here it is, Ive been going back and forth about doing this for awhile and ive decided to go for it. Basically i have a 1996 z28 M6 with a built 355. Engine has beak in time only, i would guess 500-750 miles. Reason for the part out is i spent the last of my money on an aftermarket computer setup and the speed shop that talked me into it couldnt get it to work and then they went belly up and now i have a car that doesnt run because they used the engine harness to wire the aftermarket computer. And now Im more interested in buying a house then dropping more $ on this car. So that being said I'll list what ive got as far as the aftermarket parts and you can post or pm me if you are interested and we can talk about prices. Aslo if your looking for any stock/interior peices.
*prices do not include shipping
and from the top:

LT1 intake painted red(unported) make offer
Edelbrock 58mm TB $275
Granetelli intake elbow $50
K&N CAI $75
Lucas style 30lb./hr. injectors $200
Aeromotive adjustable FPR $125
Stock casting LT1 heads (LE2 ported) $1000
Comp pro magnum 1.6 roller rockers $250
Comp Hi-Tech pushrods $100
Comp pro Magnum lifters (anti "pump-up") $175
Bullet cam 2xx/2xx .5xx/.5xx 108lsa $250
Cloyes double row timing chain $60
Speed pro forged aluminum pistons $200
Eagle forged I-beam rods $150
Eagle 3.480" forged crankshaft $400
ATI superdamper $320
Jegs EWP $100
MSD opti $350
MSD coil $30
MSD spark plug wires $100
Pacesetter LTs $350
3" true duals w/flowmaster super 44s make offer
Zoom street/strip clutch $400
Zoom aluminum flywheel $300

[popo8]

Put up some prices for some parts to satisfy forum rules ....
Thanku


Now.... What aftermarket computer did they install?

Visit us @ LTXtech.com
Larry (Popo8) Co-owner

[red_z28]

site or computer acting up. have alot more stuff to add but freezes when i go to post thread. will try again tomorrow

[zmm95]

I'd like to know some prices!

Sent from my SCH-I535 using Tapatalk 2

[red_z28]

adding parts in small edits. let me know what your interested in. And POPO, it was a MoTec M84 computer. The one time i trust someone else working on my car and I totally get burned. Never again!!!

[Camaro350z2897]

part number on those pistons?
that timing chain does not work without EWP correct?

[popo8]

adding parts in small edits. let me know what your interested in. And POPO, it was a MoTec M84 computer. The one time i trust someone else working on my car and I totally get burned. Never again!!!

Ok... Was just hoping maybe it was sonething someone here was familiar with... And could assist u, so u could sell the car whole.... Or.... Keep it.

Visit us @ LTXtech.com
Larry (Popo8) Co-owner

[CamaroZGuy]

is the Aeromotive part #13106 or 13107?

[red_z28]

part number on those pistons?
that timing chain does not work without EWP correct?

The Pistons are L2256F30 and yea you would need an EWP to run this timing chain.

[red_z28]

is the Aeromotive part #13106 or 13107?

The Aeromotive FPR is a 13107.

[red_z28]

Yea POPO, I would like to get the 24x kit but as we all know there are not cheap so Im kinda just wanting to get out of it. Time to buy a house.

[popo8]

Fair enough..

Visit us @ LTXtech.com
Larry (Popo8) Co-owner

[zmm95]

Yea POPO, I would like to get the 24x kit but as we all know there are not cheap so Im kinda just wanting to get out of it. Time to buy a house.

But no house is complete without a BAD ASS ltx in the garage.. ;) lol!
On a side note, how many miles are on those heads?

Sent from my SCH-I535 using Tapatalk 2

[red_z28]

Theres about 500-750 miles on them since being rebuilt.

[Tyler Wheat]

I'm confusted. Is this a full part out, or are you just putting it back to stock?

[red_z28]

I'm confusted. Is this a full part out, or are you just putting it back to stock?

I'm thinking about getting out completely. Depending on how much of this stuff I can get sold.

[Tyler Wheat]

I'm sure I'll be getting with you eventually for some oddball pieces.

[Camaro350z2897]

5.7 or 6.0 rods to go with those pistons? ive been looking for pistons for awhile. no one is biting on me parting out my project so i guess ill still buy more pieces to finish it

[red_z28]

5.7" rods

[sick70malibu]

I want those heads!! That would be perfect for my build... But the girls bday took all my money :( Good luck with the sale, if they are still here in a couple weeks ill probably hit you up.

Sent from My HTC Rezound

[red_z28]

Well i hope i dont upset anybody. But shortly after posting this i read green96ta's thread about his 24x conversion kits. And Ive talked to him a couple times and ive gained renewed hope in getting the car running up to its potential. i will have some parts for sale after the swap but im not 100% sure what they will be. Sorry for any inconvienience i may have caused you. But for now im staying in the LTX game. Thanks, Adam

[Tyler Wheat]

You make it sound like its a bad thing. Staying in is good!

[biggriff]

sweet...hope it works out bro

[red_z28]

Yea i dont want to get out but it has been a long hard battle with the car. Hopfully the 24x conversion is the missing link and ill be at the shootout next year. After seeing all the pics and threads talking about it. I love this site all all the ppl here are a great group and im looking forward to meeting alot of you at the shootout.

[bufmatmuslepants]

If it doesnt work out Im semi interested in the rotating assembly, at least the rods. Are they 7/16 bolt or 3/8?

[red_z28]

3/8"

[popo8]

Yea i dont want to get out but it has been a long hard battle with the car. Hopfully the 24x conversion is the missing link and ill be at the shootout next year. After seeing all the pics and threads talking about it. I love this site all all the ppl here are a great group and im looking forward to meeting alot of you at the shootout.

You have no idea how great it is.... but uve got a good start at it.
Glad to hear ur stickin with it...


Larry (Popo8) Co-owner
LTXtech.com

[SNSTR-TA]

aww was really eyeing those LE2 heads..But still,always good news to see someone sticking with the LT platform!

[lttransam]

Can I get some pics of the superdampner? Kyleozzie@comcast.net thanks!

Sent from my SCH-I405