danegearripper
03-30-2012, 10:18 PM
My modified 95 z28 lt1 Hey everyone im pretty new to this site.....heres wat my 1995 z28 lt1 has done to it...
Scat rotating assembly,lt4 hotcam,lt4 mildly ported heads,lt4 port matched intake,comp 1.6 roller rockers,58mm bbk throttle body,lt pacesetter 1 3/4 headers,3" x-pipe with moroso bullets,spectre cai,msd opti,adjustable f.pressure reg,walburg 255 f.pump,3.42 gears,m6, and zr1 17x9 and 17x11 w/nitto 555 all the way around....wat do u think this combo shud run it is stock weight plus me@315#'s....i have made 2 1/4 miles passes so far...12:69 & 12.76@111mph W/STOCK CLUTCH SLIPPING A LITTLE..... Pcm tune was from a guy in corpus christi w/laptop while i was driving car...car smells pretty rich below bout 2500 rpm's but pulls like crazy up to 6300 rpm's!!!....BTW THESE 2 RUNS WERE LAUNCHING @3500;SHIFTING@6100 W/2.10'S 60' TIMES...I HAVE NIB 4.10'S,MOSER AXELS & SPEC STAGE 3 CLUTCH JUST WAITING FOR TIE TO BOLT THEM IN...
Scat rotating assembly,lt4 hotcam,lt4 mildly ported heads,lt4 port matched intake,comp 1.6 roller rockers,58mm bbk throttle body,lt pacesetter 1 3/4 headers,3" x-pipe with moroso bullets,spectre cai,msd opti,adjustable f.pressure reg,walburg 255 f.pump,3.42 gears,m6, and zr1 17x9 and 17x11 w/nitto 555 all the way around....wat do u think this combo shud run it is stock weight plus me@315#'s....i have made 2 1/4 miles passes so far...12:69 & 12.76@111mph W/STOCK CLUTCH SLIPPING A LITTLE..... Pcm tune was from a guy in corpus christi w/laptop while i was driving car...car smells pretty rich below bout 2500 rpm's but pulls like crazy up to 6300 rpm's!!!....BTW THESE 2 RUNS WERE LAUNCHING @3500;SHIFTING@6100 W/2.10'S 60' TIMES...I HAVE NIB 4.10'S,MOSER AXELS & SPEC STAGE 3 CLUTCH JUST WAITING FOR TIE TO BOLT THEM IN...