NEW 1/8TH MILE BEST

[PHINES LT1]

8.05 @ 82.56 mph 1.67 60 ft.
Mods - CAI, PS longtubes, tune, tci stall, moser 12 bolt w/ 4.10s, DRs, weight reduction

[hempkat94z]

Nice pass

[Fastbird]

Nice launch!

[MeanGreen94Z]

damn no MPH at all though. with a th350, full boltons (no TB or injectors) stock suspension (3500# race weight) and a 10 bolt i went 7.92 @ 86.7 /1.77 60 wonder why your MPH isnt there? what stall are you running i had a 3500 TCI, with a 4L60 i had a best of 8.12 @ 86.1 /1.82 60.... anyway damn good ET but the MPH makes me wonder? though that 60ft time was wicked... ive never pulled that low before my best on spray was in the high 1.6's low 1.7's

[paul95z]

MPH is lower due to the short time being quicker compared to yours. Since he launched harder, he had less time to build mph. Confusing isnt it?
Nice times btw!

[PHINES LT1]

thanks guys, i was kinda shocked with my times. But for some reason the car has always mph low, but it just gets down the track really well for the mods. The suspension is completely stock, although i have removed the front sway bar. As for a stall it is a TCI 3500. I did get a little daylight under the left front too.:driving:

[Camaro_94]

Nice!! Wish I could 60' like that. :hail:

- Mike

[PHINES LT1]

ok new best today, after cam swap. 7.86 @ 86.40 mph. 1.72 60ft. could not get the car to hook at all, so maybe need some suspension work.

[MeanGreen94Z]

time for some suspension :) nice times

[Divine02]

I'm running a best of 7.33 at 96mph but you are running a better 60ft time. I think it's time for me to get a new set of gears. Good time though by the way.

[Badhawk]

Nice time congrats.

[YZF]

Sweet acid!

[KissMyWhtSS]

Sweet acid!
What does this have, whatsoever, with his post?

Nice times, looks like its time to build up the suspension now and get your 60' back down. :)

[Divine02]

What does this have, whatsoever, with his post?

Nice times, looks like its time to build up the suspension now and get your 60' back down. :)
Are you honestly part of a 3 second 60 foot club?

[PHINES LT1]

i'm researching suspension set-ups now but the more I read the more confusing it gets. what set-ups are you guys running? I used to be able to just mess with tire pressure but thats not working anymore.

[KissMyWhtSS]

Are you honestly part of a 3 second 60 foot club?
I make my own clubs.

But, for what it's worth, I've never ran a 60' in the 3 second range.

[Divine02]

I make my own clubs.

But, for what it's worth, I've never ran a 60' in the 3 second range.
Ok. I had to ask.

[YZF]

What does this have, whatsoever, with his post?



Sweet ass = sweet acid.

It just came out. Sorry to aggrivate you.

[Badhawk]

I'm running a best of 7.33 at 96mph but you are running a better 60ft time. I think it's time for me to get a new set of gears. Good time though by the way.


Your car seems to be running hard. What are your mods ?

[KissMyWhtSS]

Sweet ass = sweet acid.

It just came out. Sorry to aggrivate you.
Well I just felt that saying "Congrats on your times" would be a little more insightful than posting random crap in a thread.


Sorry dad. :(

[Divine02]

Your car seems to be running hard. What are your mods ?
At the time is was a 383 with a vortech V1 and nitrous. Stock transmission, stock gears, and with a set of drag radials leaving the line at 6,000 rpm. My best 60ft was a 1.68

[KissMyWhtSS]

At the time is was a 383 with a vortech V1 and nitrous. Stock transmission, stock gears, and with a set of drag radials leaving the line at 6,000 rpm. My best 60ft was a 1.68
RIP 10 bolt. :jest:

[Badhawk]

At the time is was a 383 with a vortech V1 and nitrous. Stock transmission, stock gears, and with a set of drag radials leaving the line at 6,000 rpm. My best 60ft was a 1.68

Wow congrats on doing that with stock trans and rear end. Manual trans are hard on rear ends.

[3DFORMULA]

i'm researching suspension set-ups now but the more I read the more confusing it gets. what set-ups are you guys running? I used to be able to just mess with tire pressure but thats not working anymore.

Nice times there. Suspension in sig, all used parts.

[Divine02]

RIP 10 bolt. :jest:
It's gonna happen I know. I might as well go ahead a dig a grave for it.:(

[PHINES LT1]

update: added comp 1.6 pro-mag RR and competition engineering drag shocks in the rear.
60ft. - 1.65
1/8 et - 7.73
1/8mph - 87.03

[96lt1m6]

yeah buddy :claps:
1.6 rr always do the trick!
keep it up bro