Project Rainbow Unicorn 2013

[shownomercy]

I let Shownomercyz28 chime in with specifics, but basically he bought one of my used PT88 hotparts that i reworked for him, and will be sending him a complete kit. He will be running a 383ci (single plain intake, he can give details).

The kit consists of the following:

Precision T76GTS
1 5/8" headers (reworked BBK's)
2.5" crossover
3" up pipe
3" downpipe
JGS 50mm wastegate
JGS60mm BOV
31x12x4" A2A IC
3" cold side piping
RPS couplers and T-bolt clamps
oil lines

Hotside Mockup
http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/13.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/12.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/3.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/2.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/9.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/6.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/4.jpg

[RealQuick]

Cold side Mockup
http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCARW8DEX.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCA4X6U3I.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCAND4RXE.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCAAKG0D6.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCAAKG0D5.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCAAKG0D8.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCAAKG0D9.jpg

http://i45.photobucket.com/albums/f94/RealQuick/Matt%20Kohler/photoCABWWO7P.jpg

[blackbirdws6]

Looks good and hoping the install goes smooth. I will be giving him a hand so nice to see everything should fit as it should :).

Oh and can you make sure to install something so this makes less than 709 rwhp?

[Fastbird]

Just keep it under 767 is what I say. Haha

Sent from my ADR6425LVW using Tapatalk

[RealQuick]

Oh and can you make sure to install something so this makes less than 709 rwhp?

I'll stuff a shop rag in one side of the crossover ;)

[shownomercy]

Unlike you two, it will not be a dyno queen, only goal is a low low 10 sec pass.

[Fastbird]

Unlike you two, it will not be a dyno queen, only goal is a low low 10 sec pass.

My car has been on the track already thank you very much. ;)

Sent from my ADR6425LVW using Tapatalk

[blackbirdws6]

Same. :)

[RealQuick]

Matt, any pics of the intake/TB setup?

[shownomercy]

To be honest Jon, you kinda jumped the gun on me, I am no where near getting ready to build this thing. lol

Its a modified single plane with an edelbrock low profile elbow though.

[shownomercy]

I have the engine in my garage now, next up is buying a transmission for the car.

Does anyone know if someone does the re-pinning of a 96 LT1 harness to a 24x setup?

[RealQuick]

Matt, you receive the intercooler yet?

[shownomercy]

Yea it actually made it to work on Friday but I was MIA that afternoon ;) So grabbed it this morning, looks good sitting on my desk at work

[shownomercy]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/549865_3468475266625_1113366798_3456739_229323076_ n.jpg

Pardon the dirty car and missing elbow/throttle body

[AdamG]

how did you bend the pipe? Was it pre bent stuff or did you use a pipe bender.

[RealQuick]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/549865_3468475266625_1113366798_3456739_229323076_ n.jpg

Pardon the dirty car and missing elbow/throttle body

Nice!

Adam - I bend U bends (180 degrees) and cut the angles I need.

[shownomercy]

Hot side clears a 7qt canton pan, big relief and thought you would wanna know Jon.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/543239_3890342573044_57958819_n.jpg (https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/543239_3890342573044_57958819_n.jpg)

Pistons will be here some time before the end of the month.

[AChotrod]

I wish I could afford boost :(! Kit looks great!

Oh and what did you guys run at the track???????

[shownomercy]

The old stock bottom end with LE2s went 12.1 @116 and then trans started to go, and it was just running consistent mid 12s.

This time round I am shooting for bottom 10s

[RealQuick]

Hot side clears a 7qt canton pan, big relief and thought you would wanna know Jon.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/543239_3890342573044_57958819_n.jpg (https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/543239_3890342573044_57958819_n.jpg)

Pistons will be here some time before the end of the month.

Looks good... but test fit it with the K member too.

[shownomercy]

K member is a PA racing unit, so I have high hopes it will fit, really really don't wanna drag the stocker out of the basement lol

[shownomercy]

http://i176.photobucket.com/albums/w170/bmdeluca/Matts%20Turbo%20Dreams/IMG_1053.jpg

Awww yea

[Fastbird]

Hmmmm......do like.

[shownomercy]

Moar parts pRon

http://i176.photobucket.com/albums/w170/bmdeluca/Matts%20Turbo%20Dreams/IMG_1016.jpg

http://i176.photobucket.com/albums/w170/bmdeluca/Matts%20Turbo%20Dreams/IMG_1072.jpg

[lttransam]

Looking good! I cant wait for my build to start.

[shownomercy]

So prob next month pending finances, I am gonna grab the EFI 24x hardware and a cam....

Right not I am stuck between a 224/224 .573/.565 114 or a 224/230 .573/.565 116 both would be XFI lobes.

[Fastbird]

Nice. Do like the 24x stuff. Their harness is a work of art.

[shownomercy]

I just repinned my stock harness, 12week backorder? No thanks lol

[shownomercy]

Whoring out pic cause I can.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-21559-1348282038890_zpsb0e83fac.jpg?t=1348282042

[Fastbird]

Nice job there.

[shownomercy]

Danke, I will grab some more pics of machining on Monday, left it at work cause I gotta finish the o ring spot face.

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-40849-1353728166582.jpg?t=1353728170

[CamaroZGuy]

i hope that pic is just a teaser and there are more to come!

looking good!

[popo8]

Unlike you two, it will not be a dyno queen, only goal is a low low 10 sec pass.

DAYUMMMMMMMM>..... lol



Seriously though... looks good!

[blackbirdws6]

Dis gonna be good.

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/IMG_1511.jpg

[shownomercy]

So I realized that I do not have a downpipe for my wastegate, is it needed?

[Mystery Bird]

Put a duck call on there.

[Fastbird]

Put a duck call on there.

WIN! I love that vid.

For what it's worth I have about a 6" turn down on my wastegate and it's fine.

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-10870-1353988136655.jpg?t=1353988138

As far as meth placement... Jon threw a couple bungs right before the MAF/IAT, but their close, like within 4inchs, think its far enough?

[lttransam]

Love the valve covers, is it air brushed? Also where are you going to mount your coils? Keep up the progress!

Sent from my SCH-I405

[popo8]

Love the valve covers, is it air brushed? Also where are you going to mount your coils? Keep up the progress!

Sent from my SCH-I405

They do look great... Thats that hydro-something process... Literally like floaring sheets of design on liquid that transfers over....


Larry (Popo8) Co-owner
LTXtech.com

[RealQuick]

So I realized that I do not have a downpipe for my wastegate, is it needed?

Nope... not if dumping to atmosphere. I believe you can orient the gate to aim the exhaust vented down to the ground.

[shownomercy]

Ok cool, I will just run it as is now.

Jon, for this kit, I do not need an oil scavenge pump correct? I had a nice easy drain, but forgot a starter goes there lol

[shownomercy]

Real quick... the IC brackets, don't seem to be right.

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-48619-1354465825378.jpg?t=1354465828

The brackets are too short to grab the bolts on the bottom on the IC. Do you have any pics showing install?

[shownomercy]

Any body have contact info for realquick?

[Fastbird]

www.lt1boost.net, email is Jon@lt1boost.net

[shownomercy]

Yea he emailed me back, just was a little anxious to mount the silly IC for some progress. lol

In a related thought, idk if you guys are on tech much, but another LS1 turbo kit builder went under, and yet, Jon's been round since 2007? Gotta love it. :claps:

[popo8]

Yea he emailed me back, just was a little anxious to mount the silly IC for some progress. lol

In a related thought, idk if you guys are on tech much, but another LS1 turbo kit builder went under, and yet, Jon's been round since 2007? Gotta love it. :claps:


Thats great!

[Fastbird]

Yea he emailed me back, just was a little anxious to mount the silly IC for some progress. lol

In a related thought, idk if you guys are on tech much, but another LS1 turbo kit builder went under, and yet, Jon's been round since 2007? Gotta love it. :claps:

Who went under? I almost became a casualty of the OFI debacle, he had $1800 of my dollars and disappeared. I tracked him down, called him at his new job, told him I was filing suit and he better get his documentation ready because I was going to drive right through his OFI Corporate veil, and I had my money back in 2 days.

And big Congrats to Jon. AFAIK he's still the ONLY mass producing LT1 turbo kit guy.

[shownomercy]

Ky turbo closed up shop

[bigtoyz]

looks like a nice build.....bet you'll have lots of fun with it!

[shownomercy]

So, SD or MAF tune. Go go go

[shownomercy]

http://25.media.tumblr.com/tumblr_m4rrd0U3NS1r05tymo1_250.jpg

[popo8]

I think of ur in a place where the weather doea not change alot...and if it will be more race car than dd...go for SD...

I think if its more of a driver and there are more variations to ur weather ...go MAF....


Larry (Popo8) Co-owner
LTXtech.com

[shownomercy]

Ok,anyone know what fastbird is running? I know he has a FAST setup, so not entirely a apple to apple comparison.

[popo8]

Ok,anyone know what fastbird is running? I know he has a FAST setup, so not entirely a apple to apple comparison.

All I know is it is a FAST XFI system.

[shownomercy]

Hopefully he chimes in

[shownomercy]

Well, I will just add pics for now

Trans brake thingy
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-1182-1356793124560.jpg?t=1356793126

[Mystery Bird]

^^^^Nice!

[shownomercy]

Bought a MWC front bumper support, realquick seems to disappeared so using the bumper support to mount the IC

[Bersaglieri]

Well, I will just add pics for now

Trans brake thingy
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-1182-1356793124560.jpg?t=1356793126

Who built that?

[shownomercy]

Jakes in TX

[Bersaglieri]

Same way mine was packaged. Mine's been working just fine so far. FMVB with brake eh?

Also I saw a few posts about boost guys leaving the game. Is RealQuick outta the turbo thing now?

[shownomercy]

Full PCM commanded shifts, and IDK, I think Jon is still doing it, just hasn't got back to my email I sent a ways back.

[Bersaglieri]

So which of those two cams did you choose?

How long's it been on that email? I'm sure that support will work to mount the IC no problem.

[shownomercy]

Went with a LE 224/224 cam, he did excellent in speccing one for that guy with the F1a on his TA, so I trust his suggestion.

Sent the email a few weeks ago, not that concerned really, the bumper support will hold the IC fine and make it a little easier to remove.

You have any pics of your 80e swap?

[Bersaglieri]

Single pattern, people knock em, but I've seen the ones LE designs work very well.

No not really, when I did the swap my back was against the wall so I did everything as fast as I could and didn't stop till it was done. You may have to clearance the tunnel for the electrical plug [a crossbrace if I recall] but everything else went relatively smooth. I made my own transmission crossmember from a factory M6 one, because the mounting pad is much father to the rear, but eventually got a BMR tubular one. Bending true duals was tough only because of my BMR Trak Pak. I used a Lokar dipstick and Precision Industries converter [two of them, got a restall for the new motor]. I have a Derale deep pan in the garage for it, but I had to go back to a factory pan because it was causing problems loading it on my gooseneck.

[shownomercy]

Any issues with the lokar dipstick with filling through it and then reading the level?

[Bersaglieri]

Nope, been working good for me the past 5 years or so. It's the flexible one.

[shownomercy]

Ok thanks, was stuck between that and the madman 80e dipstick.

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-13189-1357499425232.jpg?t=1357499429

[ginoz28]

Badass:thumbsup:
can't wait to be there myself

[shownomercy]

This is a bumper support
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-20852-1357685255462.jpg?t=1357685258

[shownomercy]

This is a bumper support with a IC hanging on it.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-9814-1357953002459.jpg?t=1357953003

[popo8]

Its coming together nicely man.

I forgot if you answered this before... are you planning on making the shootout?

[shownomercy]

Its coming together nicely man.

I forgot if you answered this before... are you planning on making the shootout?

If I can get my POS together and running decent, I would like too. Just need to find a copilot and make sure work is cool with it.

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-48896-1361131571776_zps7e7ad6eb.jpg?t=1361131575
.

Progress.

[shownomercy]

Hello me, its me again.

https://sphotos-b.xx.fbcdn.net/hphotos-frc1/21744_10200267148457383_2081812387_n.jpg

[popo8]

Is that an ls tb


Larry (Popo8) Co-owner
LTXtech.com

[shownomercy]

90mm indeed.

May step it up later on for a larger elbow/TB

[popo8]

90mm indeed.

May step it up later on for a larger elbow/TB

Wow... It looks right at home on there. Are they plug and play...or is that alot of modding?


Larry (Popo8) Co-owner
LTXtech.com

[shownomercy]

Wow... It looks right at home on there. Are they plug and play...or is that alot of modding?


Larry (Popo8) Co-owner
LTXtech.com

Sensor wise its plug and play, but you need a new throttle cable, and a converted single plan SBC intake to run a elbow for it.

[shownomercy]

First real fun hax0r time
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-44960-1361837457994_zps92f0a006.jpg?t=1361837459

[Bersaglieri]

I had to notch mine a little to fit a plug too. You running Jake's black box?

[shownomercy]

I had to notch mine a little to fit a plug too. You running Jake's black box?

Yea I gotta figure something out, thinking a hole through the car

And no, LS1 PCM

[Jloshotz]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-48896-1361131571776_zps7e7ad6eb.jpg?t=1361131575
.

Progress.

Looking good!

[popo8]

Sensor wise its plug and play, but you need a new throttle cable, and a converted single plan SBC intake to run a elbow for it.

Oh, so it cant just be bolted on to an LTX intake... I love learning stuff.

[shownomercy]

Oh, so it cant just be bolted on to an LTX intake... I love learning stuff.

Drill and tap it, and you could bolt it right up :laugh:

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-1513-1362005822610_zps0ff58e32.jpg?t=1362005836


Got the stupid fucking fuel tank in, gotta mount my pump and plumb that up. Slowly making progress

[shownomercy]

Mounted pump and plumbed it prelim wise.

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-59369-1362257432874_zps5c94b1c5.jpg?t=1362257434

Big race pump? Better use stock fuel filter

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-57616-1362257432023_zps6b79e39d.jpg?t=1362257434

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-69256-1362521071534_zps10e5d60e.jpg?t=1362521072

Got some time on the mill at work, and made my vac reference point hookups for WG, BOV, fuel pressure, and potentially boost controller, meth, and guage.

[ginoz28]

Why all the custom fuel line and then go stock filter?

[shownomercy]

Why all the custom fuel line and then go stock filter?

Street car, and I haven't really thought about it yet, so not on my snow ball list of things I can do yet.

I have had horrible luck with intake walbros so I just wanted to be done with em, this solved that. Completely overkill.

[ginoz28]

Ok. So it's stock fuel line from filter to the enginebay.

Sent from my EVO using Tapatalk 2

[shownomercy]

Ok. So it's stock fuel line from filter to the enginebay.

Sent from my EVO using Tapatalk 2

Sorta, stock hardlines under car, and then 6an braided up front to edelbrock rails and aeromotve regulator.

Just ordered my trans dipstick and a shit ton of -4an fittings for all the vac referenced stuff.

[shownomercy]

Hi me, its me again.

Got IC mounted
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-38170-1362611437436_zpsc9116ff2.jpg?t=1362611453

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-38281-1362611440026_zpsd916ba72.jpg?t=1362611452


http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-36396-1362611435540_zpsd624711b.jpg?t=1362611446

[popo8]

Lol. Hi U. Its me. IT looks good U


Larry (Popo8) Co-owner
LTXtech.com

[ginoz28]

Looks almost ready to turn the key B-)

Sent from my EVO using Tapatalk 2

[Ryan Stout]

Lookin great! I have horrible luck with walbros too lol

[shownomercy]

Lookin great! I have horrible luck with walbros too lol

I had two or three kick the bucket on me, and I do not want to risk a 10k motor on a crappy fuel pump.

Gotta figure out if I wanna run SD or MAF.

[Ryan Stout]

SD ftw.

[shownomercy]

I am leaning towards it, just keep coming back to people saying a true street car should have a MAF etc etc.

[Featherburner]

I am leaning towards it, just keep coming back to people saying a true street car should have a MAF etc etc.
GM did sell them for public consumption without a MAF!

[shownomercy]

Hurray for fittings!
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-46650-1362714891690_zpse3769c29.jpg?t=1362714893

Dipstick

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-46660-1362714892591_zps439cb45f.jpg?t=1362714912

[Ryan Stout]

I love getting presents from the ups man. Even if I paid for em.

[shownomercy]

I love getting presents from the ups man. Even if I paid for em. Yea always fun to get more goodies Do you have any good sound clips of your exhaust?

[Ryan Stout]

Hmmm. I should have a few driving vids. I freaking love how these sound in boost.

[Ryan Stout]

http://youtu.be/GmamRRxQVnM


http://youtu.be/rwziKL4ejd4
Only a partial run. Trying to keep from getting kicked out.

[shownomercy]

Nothing from outside the car?

Giving a lot of thought to a hood stack for teh lulz

[Ryan Stout]

A buddy of mine has a vid of my car at the track but you can't hear anything besides my 2step and then the loud GTO next to me with open cutouts. That's all I got. It's not that loud for what it is IMO. If I was on stock hood, I would have it out the hood about a foot or so with a tractor style flapper for sure.

[shownomercy]

A buddy of mine has a vid of my car at the track but you can't hear anything besides my 2step and then the loud GTO next to me with open cutouts. That's all I got. It's not that loud for what it is IMO. If I was on stock hood, I would have it out the hood about a foot or so with a tractor style flapper for sure.

Its a not so great fitting SS aftermarket hood that is kinda assumed the role of placeholder for now.

Hood stack may happen if I can find someone to make me a downpipe, err up-pipe? :D

[Ryan Stout]

Hmmmmmm. How tight of a fit is it? And how exact can you be with measurements? I kinda know a guy who's made a few hotsides.

[shownomercy]

Hmmmmmm. How tight of a fit is it? And how exact can you be with measurements? I kinda know a guy who's made a few hotsides.

Well, it would be as easy as a 3 inch V band welded to a 3inch pipe with a sharp 90* in it. Maybe be fancy and weld in a bung for my wideband.

[Ryan Stout]

When if comes time, let me know. We can make this happen.

[shownomercy]

Replied to your PM

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-54136-1364097526560_zps97e34af9.jpg?t=1364097546

crankcase vent, -10an line from hole in lifter valley

[ginoz28]

I was thinking when I tried to sell you my scavenge pump, "What would slowdown oil from the turbo drain line? " And the only thing I could think of was crankcase pressure. I'm for sure gonna use my pump now and good venting.

Looks Good
:thumbup:

Sent from my EVO using Tapatalk 2

[shownomercy]

The scavenge pump will pull oil from the turbo, so it shouldn't slow the flow down at all.

Pumping oil into the pan shouldn't really add to crankcase pressure, but if you have high crankcase pressure and no scavenge pump, you may have a tough time pushing oil into the pan.

[Ryan Stout]

I hear vacuum pumps help with oil drainage from turbos.

[ginoz28]

I was saying that the pump would make sure the oil is flowing good, not slowing oil down or making more crankcase pressure.

Sent from my EVO using Tapatalk 2

[shownomercy]

I hear vacuum pumps help with oil drainage from turbos.

Yea thats a given, less crankcase pressure and you have less fighting the oil drain.

But, at this point, I can't afford or really want to invest in a one off vac pump system. At some point later on I may, but just wanna get this thing running, and driving to enjoy it.

[Ryan Stout]

Hear ya there. I'd like a vac pimp but I'm to the point to where I just wanna drive it.

[Ryan Stout]

Lol, damn phone. Vacuum PUMP

[shownomercy]

Getting there, gotta order fans and a trans cooler, couple misc stuff, then it should be able to start/drive around.

Still gotta order a rear end. 10 bolt fo lifez

[Ryan Stout]

Drivetrain loss of a 10 bolt goes from 2% to 100% with just a stab of the skinny pedal.

[shownomercy]

Or in my case, release of T brake button lol

[shownomercy]

So, since edelbrock is a POS... anyone know where to find a 4.5 to 3 inch silicone reducer?

[ginoz28]

Dbdracing.com the new sponsor.


Sent from my EVO using Tapatalk 2

[Ryan Stout]

Siliconeintakes.com. Dunno if they make that big of a jump tho. I'd check with the sponsor first tho, just to support the forum :D

[shownomercy]

Just ordered one from treadstone, anyone need a 4 to 3 reducer? lol

[shownomercy]

Ordered pusher fans, and a trans cooler with a fan, looks like I am out of things to buy except a rear end now. Oh and a damn boost controller

Hopefully next week I can get the fans in, plumb up the cooler, and start prepping for brake lines

[Fastbird]

Which pusher fans did you go with?

[shownomercy]

Derale 16925, 2200cfm each. Hoping they do the trick.

[Fastbird]

They did on my car. They work gooooooood.

[shownomercy]

They did on my car. They work gooooooood.

You run em via stock wire, or run new power leads to em?

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-3497-1364956616619_zpsbd20ba66.jpg?t=1364956618
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-35844-1364956468591_zpsd3ccffa2.jpg?t=1364956487
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-54525-1364956467729_zpsddc6bc0e.jpg?t=1364956487
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-40359-1364956466880_zpsf50f2bd8.jpg?t=1364956468

On the last stretch..

[Ryan Stout]

Damn that was fast lol

[shownomercy]

Damn that was fast lol

Ya, summit is legit lol

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-13611-1365034871550_zps8043775b.jpg?t=1365034889
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-30129-1365904955866_zpscf5554fb.jpg?t=1365904957
Prop valve
http://i924.photobucket.com/albums/ad86/lts1ow/2013-04-13_23-33-03_742_zps50007ec6.jpg
Line Lock
http://i924.photobucket.com/albums/ad86/lts1ow/2013-04-13_23-33-36_386_zpsc423feaf.jpg
Coil Packs
http://i924.photobucket.com/albums/ad86/lts1ow/2013-04-13_23-35-04_574_zpsa2a9d154.jpg

[blackbirdws6]

Looking good. For the coil packs, you think a simple sheet metal cover or shield is necessary to protect them?

[Featherburner]

You keep saying "street car" but I'm seeing a lot of "race car" stuff.:camaro:

Looks good, Matt. I'm looking forward to seeing it in all its race car glory at the track.

[FormulaJoe]

I don't know how I missed this thread all this time, but your car is friggen sweet man! I LOVE the skulls on the rad. support and valve covers, very tastefully done.

Where exactly are those coil packs located?

[ginoz28]

Looks badass man.. What size injectors you running?

Sent from my EVO using Tapatalk 2

[shownomercy]

I don't know how I missed this thread all this time, but your car is friggen sweet man! I LOVE the skulls on the rad. support and valve covers, very tastefully done.

Where exactly are those coil packs located?

They are where the sway bar brackets would be located area on the frame rails, driver side is kinda where teh cruise control used to be.


You keep saying "street car" but I'm seeing a lot of "race car" stuff.:camaro:

Looks good, Matt. I'm looking forward to seeing it in all its race car glory at the track.

Pft, this is a street car, race cars don't have 10 bolts!


Looks badass man.. What size injectors you running?

Sent from my EVO using Tapatalk 2

80#'s

[Featherburner]

Pft, this is a street car, race cars don't have 10 bolts!
Tell that to the GN boys running 8's on their 10 bolts.

[shownomercy]

Tell that to the GN boys running 8's on their 10 bolts.

Pray it holds together on the dyno at RPM, may be some angry vette owners with axle shafts in their windshields

[shownomercy]

This is kinda sorta, very race car...

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-33594-1366424188681_zpsa9f1c3b3.jpg?t=1366424190

Tucks up nicely, did not feel like lowering car off stands, but its higher than pan/SFC etc.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-34514-1366424368609_zpsf68e9e5c.jpg?t=1366424392

Slowly getting little odds and ends done up.

[popo8]

pretty TRICK man.

Hope it makes it to the shootout for a closer look


Larry (Popo8) Co-owner
LTXtech.com

[ginoz28]

Where are you gonna route the exhaust?

Sent from my EVO using Tapatalk 2

[shownomercy]

pretty TRICK man.

Hope it makes it to the shootout for a closer look


Larry (Popo8) Co-owner
LTXtech.com

Pushing for it, certainly would be sweet


Where are you gonna route the exhaust?

Sent from my EVO using Tapatalk 2

Um.... out the hood? Duh lol

[Ryan Stout]

Oh now I'm confused as hell lol

[ginoz28]

And a flapper "tractor style" :-D

Sent from my EVO using Tapatalk 2

[blackbirdws6]

And a flapper "tractor style" :-D

Sent from my EVO using Tapatalk 2
Probably an electronic flapper controlled by a sequence of over complicated controls ;). Why? Because engineer.

[shownomercy]

Probably an electronic flapper controlled by a sequence of over complicated controls ;). Why? Because engineer.

I have been meaning to convince a EE at work to design me a PWM pcb....

For this season, I will prob just be running the exhaust dumped as it is now, just want to get it running before dropping more money on stuff.

[ginoz28]

I have been meaning to convince a EE at work to design me a PWM pcb....

For this season, I will prob just be running the exhaust dumped as it is now, just want to get it running before dropping more money on stuff.

What the hell is PWM pcb? o_O

Smarty pants

Sent from my EVO using Tapatalk 2

[shownomercy]

What the hell is PWM pcb? o_O

Smarty pants

Sent from my EVO using Tapatalk 2

Pulse width modulation printed circuit board, been tossing the electric PS idea around

[shownomercy]

Got the PS system finally buttoned up.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-12979-1366912028332_zps9d066ab9.jpg?t=1366912047

And then I have to deal with austrailians...
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-13764-1366912027500_zpsffc8ffa1.jpg?t=1366912029

If its not one thing, its another...

[FormulaJoe]

Do you have to disconnect the PS lines to take the belt off?

[shownomercy]

Do you have to disconnect the PS lines to take the belt off?

Yup, for now, it will have to do, I am gonna look into routing it behind the alt, or a quick disconnect.

[shownomercy]

And coil packs.

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-34068-1367288126120_zpsdd530f9d.jpg?t=1367288142

[shownomercy]

Can't let fastbird have all the fun, so I went at my headlight harness...

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-22763-1367370752592_zpsb7c71b1f.jpg?t=1367370773

Not using any factory relay anymore, so they are all gone
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-11716-1367370753436_zps087adb7b.jpg?t=1367370773

Ordered this guy for all my assorted pumps and fans
http://leashelectronics.com/Heavy-Duty-8-Relay-Panel-8RBHO.htm

And this guy to stash the remaining fused circuits
http://leashelectronics.com/Big-Dog-Fuse-Block-BDF.htm

What the fuck am I doing.

[Fastbird]

What the fuck am I doing.

HAHAHAHAHAHAHA!!!!!! This sounds SOOOOOOOO familiar!!!!

So you're still going to have headlights I presume. Just wondering how you're wiring them up now.

[shownomercy]

HAHAHAHAHAHAHA!!!!!! This sounds SOOOOOOOO familiar!!!!

So you're still going to have headlights I presume. Just wondering how you're wiring them up now.

Yea headlights are staying, I had not planned on changing the headlight stuff, unless I somehow mistakenly removed their power and signal wires...

[shownomercy]

Got my fittings from summit today so mounted and plumbed the scavenge pump
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-12992-1367541480901_zpsd8f9135e.jpg?t=1367541482

Stupid blue fittings..
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-13364-1367541515478_zps5d734f88.jpg?t=1367541534


Getting there...

[Ryan Stout]

Sweet. They didn't have black fittings?

[shownomercy]

Sweet. They didn't have black fittings?

The catch can one was my mistake but the 3/8npt to -10an seemed to not exist in black, either chrome or blue. And I hate chrome.

[Fastbird]

I have black 3/8 NPT to 10 AN fittings on my breather tanks. Summit branded.

[shownomercy]

I have black 3/8 NPT to 10 AN fittings on my breather tanks. Summit branded.

Ah well, things to add to my winter to do list if it ever runs this summer.

[79LT1Monte]

if it ever runs this summer.

That doesn't sound very positive, I want to see that thing run True Street this year.

[shownomercy]

That doesn't sound very positive, I want to see that thing run True Street this year.

I am a pessimistic cynic.

[Featherburner]

The catch can one was my mistake but the 3/8npt to -10an seemed to not exist in black, either chrome or blue. And I hate chrome.Blue just means, racecar.

[shownomercy]

Race car shit.

http://i924.photobucket.com/albums/ad86/lts1ow/c40a7973-f80c-4cbb-aab0-20f27226b67e_zps1265efb6.jpg?t=1368120590

[shownomercy]

Well me, its been nice


http://www.youtube.com/watch?feature=player_embedded&v=8UVuPnkSrT8

No idea how to embed.

[popo8]

Is that the first fire???

Co-Owner/Admin @ LTXtech.com

[shownomercy]

Yup, tossed some gas in it, and hooked up the mess of harness on

[blackbirdws6]

Glad I was there for the first start. Now it's time to button her up. Pat on the back is deserved for getting the harness right the first time. When does the summit order go in?

[shownomercy]

Glad I was there for the first start. Now it's time to button her up. Pat on the back is deserved for getting the harness right the first time. When does the summit order go in?

Get paid tmmr, so tmmr evening I will order a yoke and misc electrical related junk.

[popo8]

Well congrats man!!

Co-Owner/Admin @ LTXtech.com

[shownomercy]

Thanks Popo

[Fastbird]

Congrats on getting it fired up!!!

[shownomercy]

Congrats on getting it fired up!!!

Thanks! Coming for you this fall lol

As the video showed, the harness was a mess.

Started to lay it down on the engine how I wanted to route things.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-15395-1371176935975_zpsd6116508.jpg?t=1371176957

Condensed driver side
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-5972-1371176936897_zps528bb425.jpg?t=1371176957

Passenger side
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-10490-1371176937819_zps9463d7b6.jpg?t=1371176957

Gotta order a coil pack extension harness, and continue to clean up stuff. Got trans yoke and conversion U joint in, so hopefully have a DS in this weekend.

[popo8]

Lookin really good. Hope to see it in personbin KY

Co-Owner/Admin @ LTXtech.com

[shownomercy]

Lookin really good. Hope to see it in personbin KY

Co-Owner/Admin @ LTXtech.com

IDK anymore, finances really kicked my ass lately and I do not want to drive that far to not race the car.

But, finished up engine harness, all wired up and could run in this pic.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-6232-1371340362452_zpsea99962c.jpg?t=1371340380

Got my DS in with the TH400 yoke, shooting to see if I can drive it around a bit soon.

[popo8]

Well that sucks... But let me stress to u... If u come for a few days...the partying with this community is what its all about.... The show and races are just bonus...

Co-Owner/Admin @ LTXtech.com

[shownomercy]

Well that sucks... But let me stress to u... If u come for a few days...the partying with this community is what its all about.... The show and races are just bonus...

Co-Owner/Admin @ LTXtech.com

No I know, I do not drink but would be cool to meet some people I offend online lol

We shall see

[popo8]

No I know, I do not drink but would be cool to meet some people I offend online lol

We shall see

Lol... Yes... U need to offend us in person.. Hahaha


And dont worry... Im bringing heroin.

Lol






















Thats a joke people


Co-Owner/Admin @ LTXtech.com

[shownomercy]

https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcRGpwxb1n-EdRbRcRwFIZr6DNiYztQ5DS0QZ3-WKZc6K9-Tp1Yh

[shownomercy]

Its been fun gents


http://www.youtube.com/watch?feature=player_embedded&v=QM7IvOTvEEo

[Fastbird]

Good stuff man. Nice to see it moving under it's own power.

[shownomercy]

Yea, found out my PS pump decided to die between now and like two years ago when it last run, so that was a lovely drive without PS :lol:

July 11th is dyno day, bumper was primered this morning and should be back on within a week or so.

[Fastbird]

Awesome. It's gonna be siiiiiiiick!!!!

[blackbirdws6]

Sounds good and nice to see moving under its own power once again. Should be good for solid 12s.

[shownomercy]

Sounds good and nice to see moving under its own power once again. Should be good for solid 12s.

I will get a side pipe so it blows soot all over you.

[blackbirdws6]

I will get a side pipe so it blows soot all over you.

I will accept and will rotate my turn down in the appropriate direction in retaliation. :)

[shownomercy]

I will accept and will rotate my turn down in the appropriate direction in retaliation. :)

And on that day not a single ray of sunlight was had

[Ryan Stout]

Efffffffff yes!!!

Sent from my SCH-I535 using Tapatalk 4 Beta

[Cliff30thZ]

Sounds nice

[shownomercy]

Ripped into whats left of the stock relay/fuse block
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-11134-1372121807737_zps9c00391e.jpg?t=1372121829

Power for PCM, and injectors etc
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-13608-1372121807496_zpse7d30a0a.jpg?t=1372121828

Gotta pass through the headlight harness, hook up the BLS HID shenz and then start cleaning up the interior.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-23214-1372121806563_zpsd294f909.jpg?t=1372121808

[shownomercy]

The first ever quality made HID kit for camaros is back to running status

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-12896-1372206824610_zpsf2a07130.jpg?t=1372206826

Awwww yeaaaaaa

[popo8]

The first ever quality made HID kit for camaros is back to running status

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-12896-1372206824610_zpsf2a07130.jpg?t=1372206826

Awwww yeaaaaaa

They look BRIGHT!

Co-Owner/Admin @ LTXtech.com

[shownomercy]

They look BRIGHT!

Co-Owner/Admin @ LTXtech.com

Damn straight son :lol:

[popo8]

Title Change at the request of SHOWNOMERCY

[shownomercy]

Thanks Mr admin, don't care what they say bout you, your alright

lol

[blackbirdws6]

Dem lights

21231

[popo8]

Dem lights

21231

21232

Co-Owner/Admin @ LTXtech.com

[dawdaw]

MQBM cars FTW ;) sounds good! MPA is calling your name, not a lot of people running it!

[shownomercy]

MQBM cars FTW ;) sounds good! MPA is calling your name, not a lot of people running it!

If I can make it to shootout, and if I run the car, it would be true street. 10 bolt ftl.

[popo8]

If I can make it to shootout, and if I run the car, it would be true street. 10 bolt ftl.

U have to make it!!!

Co-Owner/Admin @ LTXtech.com

[shownomercy]

So sick of wiring

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-6850-1372300588433_zps72e8b043.jpg?t=1372300590

[popo8]

So sick of wiring

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-6850-1372300588433_zps72e8b043.jpg?t=1372300590

Lights mean ur doimg something right. Lol

Co-Owner/Admin @ LTXtech.com

[shownomercy]

Meth Tank
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-18734-1372783742717_zpse8f1cf99.jpg

Meth Pump and fittings
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-21788-1372783744472_zps29ae0a61.jpg

14gph nozzle
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-19329-1372783743573_zps116a59f0.jpg

[popo8]

Meth Tank
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-18734-1372783742717_zpse8f1cf99.jpg

No no no.. I have seen many a METH set up.... This is not how they make meth in my TWP. lol

[shownomercy]

Cut bumper and ready for some blending.

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-8365-1373421001413_zpsed3658f3.jpg?t=1373421003

Wired up EWP and turbo scavenge pump switches for relay board

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-20629-1373421022682_zpsa1897ece.jpg?t=1373421045

Friend came over and we verified HPtuners can communicate via data port, changed tune to 80e and verified high/low signals activate fans.

Still have to clean up the wiring mess inside but close to drivable status.

[shownomercy]

Finished up the interior, and off to dyno tmmr.

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-1130-1375066559260_zps0433252f.jpg?t=1375066580
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-3181-1375066560185_zpsf7b83d35.jpg?t=1375066560
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-2393-1375066561057_zps8203e320.jpg?t=1375066561

[popo8]

Wow... Looks great man.

Great job with the carpet

MEMBER @ LTXtech.com

[popo8]

Andddddd


Good luck on the dyno man.

MEMBER @ LTXtech.com

[CamaroZGuy]

looks good!

did you cut the bottom of your bumper?

[shownomercy]

looks good!

did you cut the bottom of your bumper?

Yes, well, I didn't but my friend did. The curved area is no more.

[ginoz28]

Very nice man :thumbup:

Hope there a vid coming :-)

Sent from my EVO using Tapatalk 2

[shownomercy]

If any one cares, its tuned.

http://i924.photobucket.com/albums/ad86/lts1ow/th_photobucket-2208-1376352559864_zps9e87169f.jpg (http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-2208-1376352559864_zps9e87169f.mp4)

[ginoz28]

Yea it looks tuned. I can tell from the pic :-D

Sent from my EVO using Tapatalk 2

[shownomercy]

Did ya click the picture??

[ginoz28]

Yea it was just a pic. I'm on tapatalk , let me check the site.

Sent from my EVO using Tapatalk 2

[shownomercy]

Ah ok, mai bad

[SexyTransAm]

Goin to be at the shootout?:-)

Sent from my SAMSUNG-SGH-I547 using Tapatalk 4

[shownomercy]

Negative, unless there are competitions for who can grenade a 10 bolt fastest

[SexyTransAm]

Hey ill play that game. Been cutting 1.5x 60s im sure mine will go very soon. Id say my trans will finish buring up the 3/4 clutch pack or the 10 bolt will pop cause I set the car on kill. Lol

Sent from my SAMSUNG-SGH-I547 using Tapatalk 4

[blackbirdws6]

Sounds great

[blackbirdws6]

Two boosted LT1's in one spot?

http://i176.photobucket.com/albums/w170/bmdeluca/Events/Cars-Coffee 2013/IMG_3126_zpsf001c613.jpg (http://s176.photobucket.com/user/bmdeluca/media/Events/Cars-Coffee 2013/IMG_3126_zpsf001c613.jpg.html)
http://i176.photobucket.com/albums/w170/bmdeluca/Events/Cars-Coffee%202013/IMG_3111_zpsf867418c.jpg (http://s176.photobucket.com/user/bmdeluca/media/Events/Cars-Coffee%202013/IMG_3111_zpsf867418c.jpg.html)

[dawdaw]

U never know about those 10 bolts. Pat Burton runs 9's on his consistently and wasn't there a guy from Chi town named rob that went 9.0s on a 10 bolt in a Turbo car? Any plans on upgrading this winter?

[popo8]

Two boosted LT1's in one spot?

http://i176.photobucket.com/albums/w170/bmdeluca/Events/Cars-Coffee 2013/IMG_3126_zpsf001c613.jpg (http://s176.photobucket.com/user/bmdeluca/media/Events/Cars-Coffee 2013/IMG_3126_zpsf001c613.jpg.html)
http://i176.photobucket.com/albums/w170/bmdeluca/Events/Cars-Coffee%202013/IMG_3111_zpsf867418c.jpg (http://s176.photobucket.com/user/bmdeluca/media/Events/Cars-Coffee%202013/IMG_3111_zpsf867418c.jpg.html)

Does that mean the unicorn is shootout ready?

MEMBER @ LTXtech.com

[shownomercy]

Does that mean the unicorn is shootout ready?

MEMBER @ LTXtech.com

Negative ghost rider.

Needs a full power tune and suspension adjustment if I want to race it. Work is just icing on the cake for me not making it.

[popo8]

Negative ghost rider.

Needs a full power tune and suspension adjustment if I want to race it. Work is just icing on the cake for me not making it.

Awwww.

MEMBER @ LTXtech.com

[shownomercy]

http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-6624-1377811820941_zpsf252d550.jpg?t=1377811823

Blankie for le turbo.

[blackbirdws6]

Adorable. Little shocked it's not pink.

Sent from my SCH-I535 using Tapatalk 4

[shownomercy]

Since I enjoy talking with myself.
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-9350-1379182143405_zps7973ab28.jpg?t=1379182145

Adding another trans cooler up front, parallel with the fan unit under the car. And DEI titanium wrap for hotside.

Dyno is set up for the 24th.

[popo8]

lookin fwd to somenvids/results on the 25th.

MEMBER @ LTXtech.com

[Ryan Stout]

Why in parallel? That things gonna have damn near ambient temps lol.

Gettin vids I hope!

Sent from my SCH-I535 using Tapatalk 4

[dawdaw]

Why in parallel? That things gonna have damn near ambient temps lol.

Gettin vids I hope!

Sent from my SCH-I535 using Tapatalk 4

T brakes will build some pretty good heat, especially on a turbo car. Its not a bad idea;)

Edit: you have any pictures of how you set them up?

[Ryan Stout]

Just curious why parallel and not series.

Sent from my SCH-I535 using Tapatalk 4

[dawdaw]

What's the difference?

[shownomercy]

Series: Trans out -> First cooler -> Second cooler -> Trans in

Parallel: Trans out -> split to feed both coolers ->both coolers merge to trans in

Less pressure build up in parallel versus series. Also theoretically doesn't heat up fluid after it has been cooled off if one cooler is working better than the other.

And yes, T brake builds heat very fast :lol:

[Ryan Stout]

Series: Trans out -> First cooler -> Second cooler -> Trans in

Parallel: Trans out -> split to feed both coolers ->both coolers merge to trans in

Less pressure build up in parallel versus series. Also theoretically doesn't heat up fluid after it has been cooled off if one cooler is working better than the other.

And yes, T brake builds heat very fast :lol:

Gotcha. Makes sense. Whats all done to your 80?

Sent from my SCH-I535 using Tapatalk 4

[dawdaw]

So what are you.doing? Running a line out, and "y'ing" it and running it to both coolers then y them back together?

I just ran mine in series, that's how my old set up was and didn't have any issues, I did go from.a tube/fin cheapy to a stacked plate which should help.

[shownomercy]

So what are you.doing? Running a line out, and "y'ing" it and running it to both coolers then y them back together?

I just ran mine in series, that's how my old set up was and didn't have any issues, I did go from.a tube/fin cheapy to a stacked plate which should help.

Yea, spent the ~50 bucks for 6an Y fittings so it will be split out of the trans to feed each cooler.

Ryan, its a level 2 Jakes, rated at ~750hp with his manual T brake and a FTI 3400-3600 triple disk converter.

[dawdaw]

Hmm just wondering where did you read that running trans fluid in series will heat up in the 2nd cooler. I can't really grasp that one. Pushing a thin fluid like trans fluid through a 3/8 line I doubt your going to see any build up of heat in series. Maybe a a bit of pressure. Then again I'm always learning, you have a link?

[shownomercy]

Hmm just wondering where did you read that running trans fluid in series will heat up in the 2nd cooler. I can't really grasp that one. Pushing a thin fluid like trans fluid through a 3/8 line I doubt your going to see any build up of heat in series. Maybe a a bit of pressure. Then again I'm always learning, you have a link?

My thought is that in moving speeds, the front cooler will have fluid cooler than the fan cooler, so if I pump it through the front cooler then to the fan cooler, it will get heated before going into trans. Reverse is sitting in trafffic, the fan cooler will be more effective and rather than sending the cool fluid to the front cooler to heat up, it just goes to trans.

Thats my jumbled thoughts on it. In other news, do not forget that your trans cooler is a male thread out, and actually order the right fittings :lol:

[dawdaw]

My thought is that in moving speeds, the front cooler will have fluid cooler than the fan cooler, so if I pump it through the front cooler then to the fan cooler, it will get heated before going into trans. Reverse is sitting in trafffic, the fan cooler will be more effective and rather than sending the cool fluid to the front cooler to heat up, it just goes to trans.

Thats my jumbled thoughts on it. In other news, do not forget that your trans cooler is a male thread out, and actually order the right fittings :lol:

Ya I don't know. I guess if your trans stays cool and your stuff don't blow up your good lol. What cooler did you order? I ordered the bm stacked plate ones and they're 1/2 npt female threads.

I wish I had a turbo set up so I could stuff the coolers under the car. I have to chrs 1313 and this is the only place I could stuff mine

[shownomercy]

Current trans cooler ...its a derale tube and fin double pass with fan
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-34514-1366424368609_zpsf68e9e5c.jpg?t=1366424392

Added B&M plate and fin here...
http://i924.photobucket.com/albums/ad86/lts1ow/photobucket-7700-1379256702420_zps4d82cdf6.jpg?t=1379256734

Hope it cools things down a lot, at worst, it added capacity to the system.

[dawdaw]

It'll work :) just make sure the asshole in the other lane is double bulbed before you go putting the brake on. Buddy has gotten screwed by sitting with the brake on building boost while the other guy is just pre staged taking his sweet ass time knowing he's a Turbo car
Only cost him a grand for the race and a couple grand to.fix the trans, what a retard :D