95 z28, custom airbrushed flames, must go!!!

[bottledbird68]

Well, got too many projects and I'm thinking it's time to let one go. Up for sale is a 1995 z28 with lots of mods. Engine:Lt1 350 with ported heads and intake. Lt4 hot cam, 1.6 roller rockers. Pacesetter mid length headers and magnaflow cat back. Msd optispark, Taylor ignition wires, recent spark plugs. Cold air intake. PCM4less tuned ecu. Car put 319 horsepower to the rear wheels on a mustang dyno. Was told motor had about 10k on a rebuild when I bought the car and we've put another 20k or so on it. Transmission/rear end:T56 six speed with pro5.0 shifter. Was told it was rebuilt about 50k before we bought it. Shifts flawlessly and has never had any issues popping out of gear. Rear end is a 10 bolt posi rear with 3.42 gears. Interior:Complete 30th anniversary Camaro interior swap out of a 97 Camaro. Interior is grey cloth with red inserts in the seats. Entire dashboard was also swapped at the same time for the 97 up style dash. Interior is in very good shape. Exterior:Just painted last fall. Body is super clean, no rust underneath as well. Car is black with real fire flames airbrushed on the entire nose and onto the doors. Wheels are black c6 zr1 replica wheels in 17" front and 18" rear with 275/40's Been chasing a couple issues recently. It's developed a stumble. Not sure if it just needs plugs or has a vaccum leak? Don't know don't care at this point. Just put a deposit on a new car today and this needs to go ASAP before I trade it in. Asking $4,800 as is or I'll pull the motor/trans and sell I as a roller for $3,000. Email or call/text 508-410-8078. Thank you http://i641.photobucket.com/albums/uu134/bottledbird68/4148a6ce.jpghttp://i641.photobucket.com/albums/uu134/bottledbird68/94163da1.jpgInterior shot before before the paint job. Jambs were redone black when the exterior was done. http://i641.photobucket.com/albums/uu134/bottledbird68/IMG_0239.jpg

[bottledbird68]

Bump it up. Still got this and would love to move it.
Willing to strip parts off to lower te price too.
Or, sell as a roller.
If you don't like the paint but love the car I'm open to repainting the car solid black as well to make a sale.

Also open to all sorts of trades. Just no bikes. Let's talk!

[Fixxer99TA]

Damn Id love to buy this, but dont have 6k I could throw at ya right now.... Just a couple projects I havent gotten to :D

[popo8]

Damn Id love to buy this, but dont have 6k I could throw at ya right now.... Just a couple projects I havent gotten to :D

Asking $4,800 as is or I'll pull the motor/trans and sell I as a roller for $3,000.

[bottledbird68]

Want me to tempt you more? Stock wheels no stereo I'd take $4,000.
Like I said, motivated seller ;)

[bottledbird68]

And I'd take less than 3,000 as a roller at this point. I'd go probably 2,500. Less if I keep the seats/door panels.

[Fixxer99TA]

Well Id want the full car, 4k is tempting I might have to consider it...

I like the flames, but Ive always wanted a black Z28 6 speed... You do body work or something?

[bottledbird68]

I do it all but bodywork is one of the main things. How'd you guess? :)

[Fixxer99TA]

Well, you offered to repaint the Z28 black for a sale for one... For how much extra? I dont know..

You also have a very sexy looking blue-flamed beast Ive seen before, so it was just a hunch :D

[bottledbird68]

No extra. I'd do it to make the sale. Just a scuff and squirt so not a big deal for me.
It needs a cap and rotor from sitting around and will need front pads soon. If you're serious, let's talk. I can fix it all or beate up a little and take it away lol.

[Fixxer99TA]

I will let you know, just want to check into what extra I have to throw around right now... Just bought some expensive things (stuff for truck/house), but there might be room for a new toy and this is just too tempting..

[Fixxer99TA]

If you do good body work (which, from what it looks like you do damn good body work) I might have to talk to you about painting the Firehawk, need someone trustworthy who will do a good job for a not-murder-me price. Prolly gonna go with touching up or full repaint of the color thats on there.

[bottledbird68]

Let me know on both counts.
I never drive the 95. Think I've had it out maybe 4-5 times all season. I would rather get my 68 back together and/or get my third gen up and running again. All the car does is sit which we all know isn't the best so I'd rather move it along to someone who will enjoy it.

[bottledbird68]

F it. Tired of it sitting. Stock wheels, no stereo. As is. Needs cap/rotor, runs/drives though.
$3,600.

[bottledbird68]

Nobody?

[popo8]

ITs money man....

Not a lack of intrest....


DO you have a craigs list ad for it... if so, I can post it all over the place for you...

[bottledbird68]

Yeah I hear ya. Any help is much appreciated.
Here's a link to my cl ad:
http://worcester.craigslist.org/cto/3307293174.html

I can make it cheaper. 2,000 as a roller, no motor or trans?

[popo8]

Yeah I hear ya. Any help is much appreciated.
Here's a link to my cl ad:
http://worcester.craigslist.org/cto/3307293174.html

I can make it cheaper. 2,000 as a roller, no motor or trans?

Im spreading the word man...

[bottledbird68]

Thank you thank you! :)
want to get some other projects done.

[Fixxer99TA]

Wish I could, but currently dropping 3-4k on the truck right now to get it ready for winter... (tires/springs/ect..) So thats the cash right there that would have been the free for "play" cash. Let me know if you still have it in a couple/few months... Theres a small chance I could pull something togeather for it if given a small bit of time. Everytime you make that damn price lower I kick myself more.

Got a 93 5.0 LX Notchback 5-speed I either need to do something with or sell also, would sell/trade cheap considering I dont think the plans I had for it will come to light anytime soon (cobra 32valve swap, or even throw an LS/LT in there).

Too bad you werent a financial institution and took payments :D

I will mention it around here and see if I can help you get it sold, considering we are fairly close togeather (Actually was in Rutland not too long ago for work)

[bottledbird68]

I appreciate spreading the word.
Im almost afraid to say it but how much were you looking to get for the notch and what's it need. I may be open to partial trades.

[casey20000007]

I would really like to buy those seats


You can't pee on what you can't touch (chevy)

[bottledbird68]

Yeah I've had a lot of offers on the seats. Buy the car and they're all yours lol!

[Fixxer99TA]

Sent you a PM about a couple things

[popo8]

I appreciate spreading the word.
Im almost afraid to say it but how much were you looking to get for the notch and what's it need. I may be open to partial trades.

WAITTTT, why would you want to replace a camaro project with a mustang project?

[bottledbird68]

I don't really want to replace it with a mustang but fox bodies seem to sell way easier around here than lt1 fourth gens soooo....

[popo8]

I don't really want to replace it with a mustang but fox bodies seem to sell way easier around here than lt1 fourth gens soooo....

You aint kidding... I was busting your stones... but your right.

[bottledbird68]

Bust away. It's well deserved lol

[bottledbird68]

Well, fired it up after sitting all winter and it's started running hot and using coolant. Not positive but thinking head gasket.
I have too much going on and zero time or desire to fix it. Time to dump the car.
Price drop to 3,000 as it sits. Subs are gone. 2,500 on stock salad shooters.

If it doesn't sell soon I'll part it out. Or, if I had a buyer for the shell I'll start parting it now.
I'll let the shell go for 1,000 on stock wheels. Less if I keep the interior. Open to serious offers. Only parting if I have a buyer for the shell!!!
Needs to go. Starting my 5.3/t56 with a turbo swap on my thirdgen shortly so zero time or desire to deal with this car. Let's talk!

[bottledbird68]

Last call for it whole. If its not spoken for by next week I think we're ready to part it.
Got an offer of $450 for the motor.
Complete trans swap, $1,600
Rolling shell $1,000 with interior, less without.
97 anniversary edition interior, seats and door panels grey cloth with red inserts $350
Add the dash and all other plastics/carpet in for another $200
Zr1 replica wheels with tires 17/18" staggered set front tires good, back almost ready to be replaced $700
The rest, ask away. If I get enough spoken for I may not wait to start parting it.