Custom Nitrous build Info Needed

[1995z28]

I have the capabitlity of having a ALL nitrous lines made with all the necessary fitting on my ship for free only i dont know what size i need on the line( although i have an idea) and what size fittings on each end, i have access to AN fittings. I know they can withstand the pressure because they can handle 3500 psi of nitrogen. Can any one help.

What SIZE AN fitting and LENGTH do i need from :

Bottle line to Nitrous selonoid =

Nitrous Selonoid to Nozzle=

Fuel Rail to FUEL Selonid=

FUEL selonoid to Nozzle=

The bottle will be a custom build out of a nitrogen bottle with a nitrogen valve safety blow off and a custom pick up tube fitted to the bottom of the valve to get liquid N20 of of the bottle with the pickup bent toward the same side of the outlet of the valve.

[1995z28]

so far i have found out that....

Bottle line to Nitrous selonoid = 16ft of line and 4AN

Nitrous Selonoid to Nozzle= 2ft of line and 3AN

Fuel Rail to FUEL Selonid= 3ft of line and 4AN

FUEL selonoid to Nozzle= 2ft of line 3AN

Does any one know if this is right?

[llong66]

I just had to do some piecing together of a nitrous kit and you are pretty close, my noids have a NPT to AN4 connector then the nozzel end of the hoze is 3an, I THINK most nozzels, unless your spraying BIG numbers are 3an.