PDA

View Full Version : Heads


FukenBrokin
08-29-2011, 10:25 PM
Would World product torquer 2 heads bolt on to a 97 lt1 out of a camaro?
popo8
08-30-2011, 08:53 AM
Maybe I cant read the question properly, but its not computing when I read it. Would you mind re phrasing it...?
CamaroZGuy
08-30-2011, 09:07 AM
just did a little research via GOOGLE and it looks as they are GEN1 SBC heads, so i am 99% sure they wont work.
MeanTA
08-31-2011, 08:42 AM
The LT1 heads are a reverse cooling setup. Made for the LT1 blocks. You need a LT1 specific head! I've read that gen 1 heads can be moddified to work with our blocks. But I'm sure it will cost a arm and a leg. Our stock heads flow very good. If I was you I would get the stockers ported and use the money on other things.
95formula383lt1
09-05-2011, 06:12 PM
it cost 400 dollars for any gen 1 sbc head to be converted to a gen 2 lt1 head by mike at cfm performance.
BlackWidowSS
09-08-2011, 06:08 AM
How extreme are you wanting heads for your 97 LT1 to be?? As said before, due to the reverse flow cooling system of the LT1, and heads for a Gen I SBC will NOT work unless you pay the extra costs to have them converted. If it does not SPECIFICALLY STATE they are for an LT1 Engine or a VIN "P" Engine, then it usually won't just bolt up regardless of what year SBC they say they are for. I have a set of Lloyd Elliott LE2 heads for sale that just need new valves if you need upgraded LT1 heads. LMK