pushrod length questions and zoom clutch

[96_formula]

i have a stock lt1 with long tube headers and exhaust run into a great deal on lt4 hot cam kit. Has everything but pushlods. I am wondering if the stock length in correct for that or if i need a different length.

This all started from my clutch going out and i need one. i have heard mixed reviews on pretty much all clutch for the lt1's. I have heard the best reviews on the zoom clutch and was wondering if anyone could help with there on reviews on them.

[96LT1355Z28]

Your stock push rods will be fine as long as you don't do anything to the heads. I'd still make sure they're clean and not bent while you have them out.

I have the Zoom HP series dual kevlar clutch and have no complaints. It holds my 420 rwhp clutch drops with slicks and has a stock pedal feel.