Winter plans/wishlist

[CamaroZGuy]

well this is what i want to do...i know some will, but i want it all to happen.
as i said before my stock 16 year old suspension is done! so this is what im looking at getting.

1. Koni single adj. front shocks $480
2. Koni single adj. rear shocks $300
3. Eibach Prokit springs $230
4. UMI 3-point subframe connectors (bolt in) $300
5. UMI Adj torque arm $300
6. UMI front upper and lower control arms $660
7. spohn swaybars $330
total $$- ~2,600

ill probably do the work in that order.

but any input is more then welcome! http://www.speeddensity.org/images/smilies/biggrin.gif

[YZF]

Sounds like one hell of an upgrade! Hope she performs as well as 2600 should :)

[Camaro_94]

I'd like to do a cam swap over the winter.

- Mike

[Fastbird]

Get Vette back and tuned with good turbo inlets. Work on Trans Am to hopefully finish her up.

[KissMyWhtSS]

If I can convince my mom to park her car outside I may tear down for the cam swap, but I won't have all of the parts yet so we'll see.

[Fixxer99TA]

If I can convince my mom to park her car outside I may tear down for the cam swap, but I won't have all of the parts yet so we'll see.

You cant polish a turd and make it nice. :D

I hopefully will be doing up the LE2/GGPC ported LT1 HSR/LE2.5-3 cam OR 847. Should begin getting the parts pretty soon...

[97ForMuLa]

put on headers and ORY after i pass smog in january, gears/tune... then nitrous soon after

[KissMyWhtSS]

put on headers and ORY after i pass smog in january, gears/tune... then nitrous soon after
should wake the car up.

[Camaro_94]

I'd also like to fly down to San Diego and visit one of my uncles who's the manager of a huge collision shop down there and try to learn a few things about painting cars. Just thought it would be an interesting thing to learn how to do. I'm not expecting to be an expert at painting, but I'd just like to learn a little about how to do it.

- Mike

[BlownFormula]

1. Mini tub the rear
2. Sell my wheels and buy new ones
3. S&W Racecars subframe/torque arm kit
4. Strange S60 (narrowed 2 inches on both sides
5. Strange driveshaft
6. Baer track kit

It's gonna be an expensive winter. :doh:

[Speed Density]

For the Camaro:
1. Put my Yank coverter back in.
2. Tune the car

For the vette:
1. Sell the GTP heads and get some AFR 205's
2. Snag a nice mid 230s bumpstick
3. Nitrous outlet ring kit

[Z28pr0jekt]

For the Camaro:
1. Put my Yank coverter back in.
2. Tune the car

For the vette:
1. Sell the GTP heads and get some AFR 205's
2. Snag a nice mid 230s bumpstick
3. Nitrous outlet ring kit


just sell the gtp's to fastbird haha

[BLK95TA]

my winter wishlist

That it doesn't snow enough for the city to throw down salt

(then maybe my car won't have to hibernate for 4 months, lol)

[KissMyWhtSS]

my winter wishlist

That it doesn't snow enough for the city to throw down salt

(then maybe my car won't have to hibernate for 4 months, lol)
doubtful, haha... whare are you from again?

[bowtiekid]

well this is what i want to do...i know some will, but i want it all to happen.
as i said before my stock 16 year old suspension is done! so this is what im looking at getting.

1. Koni single adj. front shocks $480
2. Koni single adj. rear shocks $300
3. Eibach Prokit springs $230
4. UMI 3-point subframe connectors (bolt in) $300
5. UMI Adj torque arm $300
6. UMI front upper and lower control arms $660
7. spohn swaybars $330
total $$- ~2,600

ill probably do the work in that order.

but any input is more then welcome! http://www.speeddensity.org/images/smilies/biggrin.gif


Dont do bolt on SFC's... IMO its not gonna be as strong as Weld in's just my .02

[Fixxer99TA]

Yeah I would definitely go with the weld ins, and have someone you KNOW is good do them. Other than the bolt in stuff, everything else looks good. Going to be an expensive winter....

[Fastbird]

just sell the gtp's to fastbird haha

Ha ha not so much. Have Patriot Stage II 317's.

[Verz]

Hmm lets see get my motor together and may add in some lightly touched up heads to go with the cam, bolt ons and headers/exhaust oh and fix the trans to get this bird back on the road.

[Milk Man]

get my s10 finished. car should be done for now...

[chevy42083]

Finished? Is that really possible :D

[1hottcamaro]

I wanna get my 383 done, and have my Advanced Induction stuff on instead of just sitting in the spare bedroom.

[BluBeaSSt]

Finish the LS6 Build (Needs a Bottom end and Valve Train...and Port Work)
Installed the Spec III
Install the Headers
Buy and Install a Plate N2o kit

Buy a Harley :D

[Malice]

Camaro:

Install hotcam
get/install replacement 1.6rr, so I have 16 matching rockers instead of 15 1.6's and a stock stamped rocker.
Get install 1 lunati valvespring, so I have 16 matching valvesprings vice 1 stock and 15 lunati's.
Install existing wideband setup into new header ypipe.
Replace flowmaster muffler with flowtech afterburner.

Refinish interior panel paint.
find/install ebony rear seats (don't have any rear seats)
find/install headunit mounting bracket, so my stereo isn't ghetto rigged into the dash

Trans Am:

Maybe put camaro's flowmaster muffler on TA. Maybe...... I kinda like having one car with a quiet interior.

[FORMULA94]

car will sit over winter, cept for one fix. ill take the alt off and have it rebuilt for summer.

but the winter is my savinging time. no place to work on it anyway. should have bout 4k saved for these mods come good weather

spring/summer projects.

full tune up/ maybe msd upgrade depending on cash

cold air intake k/n probly.

wheels tires a must AR torque thrust II's 17 all round (11"s out back though gots to have some meat)

take my doors apart and align the windows(might have gm if im lazy)

depending on money i want to upgrade the speakers and head unit at min. subs and system can wait for a while. just want to get rid of the crap head and upgrade to speakers that arnt messed up.

[CamaroZGuy]

Dont do bolt on SFC's... IMO its not gonna be as strong as Weld in's just my .02


i plan on doing the dame thing i did with my relo brackets, bolt them and weld them.

[Biggin'89]

Stand-up radiator
UMI k-member w/ tubular lower a-arms
front coil-overs
some dieting
redo exhaust
finishing wiring cutout, gauges, and line lock
want to get a wideband
make new brake lines (after the abs delete they leak)
battery relocation
relocate fuel lines
delete evap
small wire tuck (just clean it up and hide what i can)
would like some led's from brian at ledvault.com
get the rear greg welds in 17's
make room for the 325/40/17's:metal:
and i know there is more but can't remember... oh yeah and a fuel pump to keep up
So yeah i got quite the list of stuff to do. My goal is march, so i can get it broken in, dynoed, and get used to the car at the track for the LTx shootout.

[BLK95TA]

doubtful, haha... whare are you from again?

northwest indiana.

believe it or not my car hasn't seen a single winter north of north carolina. last winter was the first winter it was up here and it was parked all winter. I like having a rust free undercarriage and i plan on keeping it that way.