Camaro Ashtray Switch Panel?

[Counted Out]

Does anyone make one? I know Emblem-Pro's makes ones for 93-97 Firebirds, but I don't see one listed for the Camaro. Or are they the same?

http://www.emblempros.com/inc/sdetail/1374

[devonsZ28]

nitrous outlet makes a nice one

http://www.nitrousoutlet.com/catalog/categories.asp?category=23&section=94

[Counted Out]

Now I'm really confused. They have one for an 93-02 Fbody and one for an 93-97 Automatic Fbody. I'm pretty sure the ashtrays changed from 93-96 to 96-02, so I'm not sure how they could make one for an 93-02.

[Camaro_94]

Those look awesome!

Thats where my switch for my cutout is.

[faust]

i called today and he will call me back in an hour or so. i have a plate but its not as nice as there's.. hopefully they make one for us 93-96 manual guys

[AChotrod]

Nitrous outlet FTW. Should work in both camaro and Firebird
http://i33.photobucket.com/albums/d53/achotrod/n2oinstall052.jpg
http://i33.photobucket.com/albums/d53/achotrod/n2oinstall051.jpg

[devonsZ28]

the 93-02 one is for 6 speeds and will work with any 93-02 6 speed

[CALL911]

If you want something quality and for most likely a much better price, contact Sean (aka Fastbird) on the board. He makes these for his line lock kits (I've got one and its awesome! :devil: )

Or check them out at http://www.fastbirdperf.com/

[Counted Out]

If you want something quality and for most likely a much better price, contact Sean (aka Fastbird) on the board. He makes these for his line lock kits (I've got one and its awesome! :devil: )

Or check them out at http://www.fastbirdperf.com/
Nice plug. ;)

But he doesn't make switch panels, he simply added a switch to the ashtray.

[CALL911]

He can make switch panels though. (sorry if I wasn't clear on that) I know he has the matereals and I believe he has even done them before. Shoot him a PM, and I'll bet he can make you what you are looking for.

[Fastbird]

He can make switch panels though. (sorry if I wasn't clear on that) I know he has the matereals and I believe he has even done them before. Shoot him a PM, and I'll bet he can make you what you are looking for.

You're killing me smalls. If you check out the page that has the switch panels on my site, you'll see that I don't actually make the panels, a person I partnered with does. He also supplies the Nitrous Outlet switch plates if I remember right.

[faust]

i talked to jim and he is headed back offshore so he won't be available till nov to work on the one i'm sending as a template. he was quick to reply and willing to try to make me a 5 button panel. without this thread i wouldn't have even known about him

[CALL911]

You're killing me smalls. If you check out the page that has the switch panels on my site, you'll see that I don't actually make the panels, a person I partnered with does. He also supplies the Nitrous Outlet switch plates if I remember right.

So a person via you can make them. You still would be the person to contact. Sorry if I was partially incorrect :cool:

[faust]

jim thelen is his name, and you can get ahold of him via fastbirds site. just follow the link. sorry sean if i'm overstepping

[Fastbird]

No overstepping at all. Jim helped me out and I help him out by having the stuff on my site.

["NO SHOW"]

Sounds like everyone here is a fan of the same plate. LOL I am in the group, I have one from NO.

[Counted Out]

The only problem with the Nitrous Outlet plate is that it seems to be nitrous specific - once I get some nitrous, it is a for sure thing though. For now, I might just keep adding switches in the little spot below the cigarette lighter - I think they look great there.

[Fastbird]

The only problem with the Nitrous Outlet plate is that it seems to be nitrous specific - once I get some nitrous, it is a for sure thing though. For now, I might just keep adding switches in the little spot below the cigarette lighter - I think they look great there.

Contact Jim via my website. He can do a custom setup in any configuration you want.

[captainofiron]

I made my own one, just get some styrene sheets from a local hobby shop and cut out the desired switch holes and paint it

in total mine cost about 3 dollars

[Counted Out]

I made my own one, just get some styrene sheets from a local hobby shop and cut out the desired switch holes and paint it

in total mine cost about 3 dollars
Pictures?

[captainofiron]

Pictures?

here you go bud

5153
5154
5155

[crows93z]

anyone willing to pay that much for a piece of cut ABS is insane. I made my own switch panels with a total investment of $5.

Switches are a couple bucks a piece. I just don't get it.

[faust]

update, jim has my plate, hes using it for a template so soon he will have them for 93-96 m6 camaro's. i have to say he's real ez to work with aside from making me a new one hes it going to engrave my original powder coated one.