Front Lower A-Arm Measurements

[Fastbird]

Does anyone have measurements on hand or does anyone have a stock a-arm laying around that they can take measurements for me from?

Measurements I'm looking for is from ball joint center to each bolt hole center. Alignment (toe is WAY out on both sides) is horrible on my new suspension setup and I'm not putting any more turbo kit stuff on the car until my eyeball tells me I can drive with the car somewhat aligned. Want to work unobstructed when setting the suspension.

[KissMyWhtSS]

Wish I had seen this a couple days ago I could've got them while I had the shock/strut out

[SWells]

I have a set in my garage and can get you a pic and measurements this weekend. But the adjustment is not in the arm it's self, it's where the arm gets bolted to the slotted holes in the frame. I'm thinking that unless your arm is bent/distorted that's not where your problem is. Let me know what you need, I'd be glad to help.

[Fastbird]

Thanks for the offer guys but Tony got me what I needed. I fogot to update this thread.

[Speed Density]

Thanks for the offer guys but Tony got me what I needed. I fogot to update this thread.


No problem sir.