first trip to the dyno guess numbers

[zooguy]

its my first trip to the dyno to get a base line run done the car is stock "kinda" except the k&n square air filter that is in the factory intake box

the car is a 1995 pontaic formula ... the motor is out of a 1997 z28 and has about 95,000 miles

car is an auto and 2.73 gears


dyno is a: dynojet 248

altitude is about 1000ft above sea level.

[mrbadlt1]

a4 or m6? a4 prolly 255-260 m6 265-270

[zooguy]

well i got back and was surprised at what i got

[devonsZ28]

how much did you put down?

[zooguy]

244.72 rwhp and 277.52 rwtq



hp seems a little lower than i wanted but where did all that torque come from?

remember this car is an auto with 2.73 gears

[mrbadlt1]

lt1's are naturally torquey engines

[19mike84]

not bad for a stock auto lt1

[zooguy]

4259

[zooguy]

does this look okay?

what happened from 4500rpm to 5000rpm?

[~chipsahoy~]

Keep in mind that it was a very hot and muggy day down there in your area.

[RoboLuke]

Where'd you take it to?

[zooguy]

alternative motor sports down on reno and council

$35 for the first pull and $20 for each pull after that

[1badeagle]

Not bad for a stock motor. Now I'm curious of what mine would throw down.

[Lawhead]

Well I don't even know where there is a dyno around here and one place i found a lil bit away wanted 800 bucks a day to tune your car i want to find these cheap dyno's that will just tell me the HP and torque lol

[ScreaminRedZ]

Nice numbers, they look right to me. I've owned several A4 LT1 cars and they always dynoed 230-235 rwhp and 270-280 rwtq SAE corrected, when stock. If you set your correction to SAE then your car would probably be in the mid to high 230's.

My cars all ran low 14's at 97-98 mph, so I don't believe they were down on power. From what I've read the M6 cars always dyno a bit higher on a chassis dyno.