Stock Dynos

[LSWHO]

Might as well start a post on stock Dynos!

Mine:

Bone stock 97 Trans Am. 96 WS6 motor 70k mile bottom end 100k topend, A4

231hp/270tq
http://farm4.static.flickr.com/3131/2910047375_180dd68681.jpg?v=0

[Brandon]

did you get a 1/4 mile time for it?

[LSWHO]

Never got my 60' down to even decent to get anything worth mentioning.

Shoulda been 14.3 range with the 2.73 gears.

[jaysz2893]

Stock i was 266.5hp / 314.1 tq (mustang Dyno)
With 300 bucks in bolt ons i was whatever my sig says. (mustang dyno)
Now i have full exhaust with LT's, ignition upgrades, a 52mm tb, and ram air. I need to get a dyno tune soon and use that moates ostrich i invested in. LOL

BTW i have a m29 6speed and the stock 3.23 gears

[Brandon]

Might as well start a post on stock Dynos!

Mine:

Bone stock 97 Trans Am. 96 WS6 motor 70k mile bottom end 100k topend, A4

231hp/270tqcan you possibly post up the dyno graph?

[YZF]

Stone stock did 267/298 at 81k all original.

With a carrier bearing trying to come apart inside the rearend!

[BluBeaSSt]

Stock i was 266.5hp / 314.1 tq (mustang Dyno)
With 300 bucks in bolt ons i was whatever my sig says. (mustang dyno)
Now i have full exhaust with LT's, ignition upgrades, a 52mm tb, and ram air. I need to get a dyno tune soon and use that moates ostrich i invested in. LOL

BTW i have a m29 6speed and the stock 3.23 gears

They only put 3.42's in M6 car's ???

[KissMyWhtSS]

They only put 3.42's in M6 car's ???
http://www.thorainstitute.com/uploaded_images/Getting%20It%20Wrong%20face-738977.jpg


1993 M6's were M29 or M28. slightly different gears (lower 6th IIRC) as well as different rear gears. (3.23 or 2.73, respectively)

[KissMyWhtSS]

For reference:
Year Model/Optn 1st 2nd 3rd 4th 5th 6th Final
---- ------------- ---- ---- ---- ---- ---- ---- -----
1993 Manual/M28 3.36 2.07 1.35 1.00 0.80 0.62 2.73 (GU2)
1993 Manual/M29 2.97 2.07 1.43 1.00 0.80 0.62 3.23 (GU4)
1993 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 2.73 (GU2)
1993 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 3.23 (GU5)

1994 Manual/MN6 2.66 1.78 1.30 1.00 0.74 0.50 3.42 (GU6)
1994 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 2.73 (GU2)
1994 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 3.23 (GU5)

http://www.f-body.org/faq/4/4_3.htm

[bricez28]

sooo back to stock dynos.

[Spudnick]

Made 275hp/312tq with only a catback. 95 M6 with 57k miles.

[Brandon]

all these dyno numbers, but nobody has a graph?

[Spudnick]

I knew I forgot something... :rolleyes:

http://img.photobucket.com/albums/v16/spudnick3119/dyno.jpg

[1994Z28Lt1]

here's my stock dyno with about 70,000 miles stock exhaust, tune, intake etc

this is through an M6 on a dynojet SAE corrected

[KissMyWhtSS]

here's my stock dyno with about 70,000 miles stock exhaust, tune, intake etc

this is through an M6 on a dynojet SAE correctedif completely stock that's really impressive.

[LSWHO]

Just to clarify, a car with exhaust is NOT STOCK... so it doesn't really count in a stock dyno thread...

[LSWHO]

Finally posted a graph. Check out that air fuel!

[BLK95TA]

my car dyno'd 245/283 when it was close to stock

by close i mean it had a K&N drop in panel filter (the stock airbox was intact though, even had that stupid bellow under the elbow), msd wires, and ngk plugs, and a MSD cap/rotor, thats it

[ScreaminRedZ]

Numbers in my sig. My previous 1996 vert TA A4 made 233/270 and ran 14.5 @ 96 mph.