Big part out of LT1 performance stuff

[95Yardbird]

All pricing is without shipping. Buyer must pay all shipping.
If you would rather talk or text you can reach me at (858)373-8516

I am starting to part out my 95 Firebird Project that I just can't seem to finish. I will be updating and adding parts as i document them. Thanks for looking. Any ?'s or for pics just send a PM.

- Fully forged 385 LT1 fresh from machine shop
Scat forged crank
Scat forged H beam rods
Mahle forged flat top pistons
Rings gaped for nitrous
Everything machining wise that could be done was.
$3000

- "Bigblock" hood for 93-97 Firebirds
One corner is broken, still have piece
Flat black
$300
3193

- Black ZR1
275/40ZR17 Nitto NT05
315/35ZR17 Nitto NT05
+/- 10 miles
$1000
http://i649.photobucket.com/albums/uu216/95yardbird/001-8.jpg

- 10 bolt rearend gutted w/axles
$40

- Motive 4.56 3 series gears
$140

- B&M trans cooler w/lines and mount to bolt right in
SOLD

- Trans lines stock w/inline filter
SOLD

- LT1 intakes (1-'93)(2-'95)
$40 each

- 4L60E Performabuilt Lv I
+/- 5,000 miles
SOLD

- LT1 heads stock castings
Heavily ported
2.02/1.6 valves
Patriot performance gold springs kit
58cc combustion chambers
freshly surfaced
Ready to bolt on
SOLD

- LE4 custom cam
Dur @ .050 240/240
Lift .562/.562
Sep 108
$140

- Felpro intake gasket set #95580
SOLD

- Felpro exhaust gasket set #95585
SOLD

- Felpro Head gasket x2 #1074
$60

- Jegs Chevy 153/168 starter #10001
$120
http://i649.photobucket.com/albums/uu216/95yardbird/016-5.jpg

- ARP windage tray stud kit #134-5502
$40

- Jegs billet water pump 50gpm #50915
SOLD

- Autometer 2 5/8" oil pressure gauge #3522
SOLD

- GM gear additive
SOLD

- Siemens 63lb Injectors #INJ-GAS-006
SOLD

- GM oil pump drive #1103868
$40

- Aeromotive Fuel pressure regulator #13107
$120

- Scanmaster LT1
SOLD

- GM crosstube seals #10108689
SOLD

- GM low oil switch #12603782
SOLD

- ARP oil pump stud #230-7003
$2

- Billet Specialties tall center bolt valve covers
$120 PENDING
http://i649.photobucket.com/albums/uu216/95yardbird/030-2.jpg

- AZS&M 58MM TB
SOLD

- Pacesetter LT headers
wrapped and painted
$200
http://i649.photobucket.com/albums/uu216/95yardbird/044-1.jpg

- Spohn adjustable crossmember mount TA w/DSL Red
SOLD

- Pacesetter Y pipe w/cutout
SOLD

- UMI strut tower brace
SOLD

- Yank PT4400
Two passes on
$700

- Professional Products damper #90030
SOLD

- Cloyes double roller timing chain set #9-3145
SOLD

- Polished Billet double adjustable lower control arms w/spherical rod ends
$160
3195

- FelPro timing cover gasket set #45956
SOLD

- ARP Motor mount bolts #130-3105
$4

Comp 1.6 SA 3/8 stud mount roller rockers
SOLD

JE forged 4.030 dish pistons for 5.7 rod and 3.75 stroke with pins and spirel locks. Don't know the dish volume but the CR was 8.5. I have 7 good ones.
$400
http://i649.photobucket.com/albums/uu216/95yardbird/018-2.jpg (http://i649.photobucket.com/albums/uu216/95yardbird/018-2.jpg)


Jegs Torque Converter Bolts 82500
$3

Comp cams Timing chain set with 3hrs
$250

ABS wire looms from module
$10

3 1/8" pulley
SOLD

4 7/16" pully
$6

Stock alternator
$30

Comp cams raised 5/16 guide plates brand new
$10

95 auto center console
SOLD

95 dark gray rear seats good condition
$50

Stock radiator support
$40

[CamaroGirl]

hot damn...awesome prices.

[n2ocamaro]

I'll take the 3 1/8" pulley. How much shipped to 47129.

[Bigbadwhitey]

Pics of the motor, and build specs?

[somlt1]

Ill take the pacesetter y-pipe off your hands!

[R3DLT1]

Hey can u send pics of a 95 intake to r3dlt1@uscellular.blackberry.com

Shippied to 74006

[Fastbird]

what color is the UMI Strut Tower Brace?? Very interested in that

[95Yardbird]

what color is the UMI Strut Tower Brace?? Very interested in that

RED

[harner]

I'd like the center console, but I think the shipping would be ridiculous. All I really need is the lid for the compartment. Would you be willing to part?

If so, how much? My zip is 17961.

[rb5509]

if so can you send me pics? and how much shipped to 32746?

[95Yardbird]

Replied with PM's thanks

[95Yardbird]

updated

[ws6nighthawk]

damn i wish i had money right now.

[Itsonlyanlt1]

Im interested in the gears.. You have a PM.

[95Yardbird]

sold heads & TB. Still lots left; come & get it!

[95Yardbird]

Lets move some parts, come on guys!

[Fastbird]

Aeromotive FPR -- Do you have pics? How did you like it when it was on the car?

[bleakdragonmage]

Can i get specs on the Guideplates/FPR. Thanks.

[zooguy]

headers ... are they still there? send me a pm

[95Yardbird]

Lets get some parts moving.

[1badeagle]

How much lift does the le4 cam have with 1.6 rockers? Ill take it if it will work with my .600 lift valve springs. Ill also take the windage tray studs and oil pump studs.

Let me know.

Dustin

[Paulster2]

How much lift does the le4 cam have with 1.6 rockers? Ill take it if it will work with my .600 lift valve springs. Ill also take the windage tray studs and oil pump studs.

Let me know.

Dustin
If the original numbers were posted with 1.5:1 rockers, to get the lift number to 1.6:1, just multiply the number by 1.0667 and you are in the very near ball park. An example:

1.5:1 lift = .510"
.510 * 1.0667 = .544" 1.6:1 lift

(The "real" way to do it would be to divide the lift by 1.5, then multiply that number by 1.6 to get your answer. My way just takes out the middle man.) Hope this helps.

[1badeagle]

Ok well if i do it that way it come out to .599 lift. Is that pushing it to close to my isky springs and thier max lift of .600?

[95formula383lt1]

yea that's def pushing it man, that would be scary.

[1badeagle]

Ok, thanks for all the help. Bump for the sale of a sweet cam.

[95zsean]

Great Guy!!!!Fast shipping.... Thanks!!!!

[WarBird]

PM's on valve covers