I'll be the first Vendor here......

[Fastbird]

Guys, for those that didn't know, and it's probably a lot considering I'm only a vendor on the Corvette Forum and SpeedDensity.org, yes, I make a few small parts.

First up, line locks. I currently have kits for the C5 and C6 corvette priced at $150 shipped each. This is the most complete and inexpensive kit on the market for the Vettes, so spread the word.

I also do LT1 and LS1 F-Body line locks. These are complete kits also, and I sell them for $125 shipped.

I do heated oxygen sensor wiring harnesses for the 93 F-Body cars. Those mainly sell on the SD website.

My newest product is going to be modded fuel rails. I've found a way to mod the 94-97 fuel rails for -AN fittings (-8 an in, -6 an out on each rail) WITHOUT welding. These will be sold for $100 if you send me your rails, $150 with a $50 refundable core, or $150 outright. I'll have more pics and such of these up soon as I'm finishing up the project.

I stand by everything I make 100% and strive to make sure you as the customer is happy.

Link to website in my sig.

[santa_rosa_lt1]

he has great products,and is a great seller.

[Toronto_LT1]

awesome! i've been thinking aboout getting line locks,now i know where to go...good pricing too.:claps:

how about an LS1 style intake conversion kit that'll fit under the stock hood??;)

[Fastbird]

Yowza. Never thought of an intake kit. I'd have to do a lot of research there. Only intakes I've been playing with for a year now are the ones connected to things that pressurize. :D

[SoulReaver]

Your part of the list now! Gj Buddy!

[McCauleyWB]

I have seen the solenoid mounted in that location before, but never knew where it came from. I like the cleanliness of the installation. Would you happen to know if the solenoid is rebuildable?

[jaysz2893]

His heated O2 harnesess are awsome! Great quality, and superb directions.

[Fastbird]

I have seen the solenoid mounted in that location before, but never knew where it came from. I like the cleanliness of the installation. Would you happen to know if the solenoid is rebuildable?

I'd have to compare the rebuild kits to the solenoid guts. I've had them apart before and they tear completely down, so I don't see why not, but again, I just need to verify.

[travail]

I want to get a line lock for my 7. But it have 4 line and all of the line lock I have seen are for 1 line. if you can help to find me one the will would I will get it.

[travail]

Guys, for those that didn't know, and it's probably a lot considering I'm only a vendor on the Corvette Forum and SpeedDensity.org, yes, I make a few small parts.

First up, line locks. I currently have kits for the C5 and C6 corvette priced at $150 shipped each. This is the most complete and inexpensive kit on the market for the Vettes, so spread the word.

I also do LT1 and LS1 F-Body line locks. These are complete kits also, and I sell them for $125 shipped.

I do heated oxygen sensor wiring harnesses for the 93 F-Body cars. Those mainly sell on the SD website.

My newest product is going to be modded fuel rails. I've found a way to mod the 94-97 fuel rails for -AN fittings (-8 an in, -6 an out on each rail) WITHOUT welding. These will be sold for $100 if you send me your rails, $150 with a $50 refundable core, or $150 outright. I'll have more pics and such of these up soon as I'm finishing up the project.

I stand by everything I make 100% and strive to make sure you as the customer is happy.

Link to website in my sig.
You should post some pics

[Fastbird]

I want to get a line lock for my 7. But it have 4 line and all of the line lock I have seen are for 1 line. if you can help to find me one the will would I will get it.

Where are you located? Can you get me engine bay pics?

Here's some pics of some of my stuff attached:

First Pic is a Installed LT1 Line Lock
Second Pic is my Heated O2 Wiring Harnesses
Third Pic is my Fuel Rails, -8AN in, -6AN Out
Fourth Pic is a installed LS1 Line Lock on Call911's Formula
Last Pic is a C5 Kit ready to be bagged and shipped showing all components.

*Edit* Also everyone, if you're in the St. Louis area I do installs/maintenance on the side and am quite familiar with the LT1 F-Body.

[travail]

Here you go
http://i259.photobucket.com/albums/hh306/travaille/brakes004.jpg
http://i259.photobucket.com/albums/hh306/travaille/brakes003.jpg
http://i259.photobucket.com/albums/hh306/travaille/brakes002.jpg

[Fastbird]

Ouch. That's rough. Although it looks like tha tone line coming from the rear of the MC to that modulation pump could be intercepted for a solenoid. If I can get my hands on a local RX7 with that setup I can probably come up with something for you.

[travail]

thanks

[Fastbird]

Just an FYI, but it looks like you only have two lines coming from the Master Cylinder, is that right? If that's the case, I can definitely set you up with something, it'll just take me having to see a car with your exact same brake setup on it.

Where are you located?