Shock/Spring - Looking for a good balance of traction vs handling

[KissMyWhtSS]

I'm looking at getting new shocks/springs in the near future. I was thinking about SLP #7002 (http://www.slponline.com/view_product.asp?P=70002) but I kinda think I'll desire more performance out of the suspension and want a more adjustable suspension.

I don't know much about QA1's in terms of what to look for but I think I'd want 300 or 325 lb/in springs. (or higher) Ideally, I think I'd like Stranos with Koni's but they are awfully pricey.

What's everyone's suggestion. Ideally, I'd only like to spend as much as necessary to get good performance, but I don't mind spending more to do it right.

Chrome 17x9.5/11" ZR1's
315-35-17 Nitto NT555R in the back
275-40-17 Sumitomo HTR Z up front
Note: Tires will be replaced soonish -- I'll most likely be running 315 DR's for the track and some decent 275's all the way around for the street.

Suspension/Chassis Mods:
BMR Rear LCA's
LCA Relocation Brackets
BMR Adj Panhard Bar
Ebiach Sportline (1 coil cut) up front
Stock Blistein Level 2 out back, w/ heater hose mod.
GM Durastop Drilled/Slotted Rotors

[96LT1355Z28]

I say Strange DA up front with some 315/325# springs depending on your weight, stock springs in rear with what ever brand adjustable shock you want. The shocks are gonna determine you ride stiffness the springs just hold up the car as the shock controls the extension and compression.