383 video

[95z28man]

Hey guys, I posted this vid over on cz28.com a while ago and forgot to post it here, so here it is. The first video of my new setup, just a quick walkaround with a few revs.

http://www.youtube.com/watch?v=vssF-_dI_-U

[blitzed96]

Sounds good any #'s with the setup?

[yngbird]

that thing is badass

[Louvit]

wow, that sounds great!

[James Montigny]

Love the idle :) What kind of mufflers are those?
What are you running for heads and cam?
And are the dyno numbers in your sig current?

[AChotrod]

Sounds awesome!!!

[richardson]

awesome.

that hood looks great on your car

[roadrocket]

sweet!!!!!:drool:

[95z28man]

Thanks a lot for all the compliments! And to answer some questions:

-Dyno numbers in sig are current.

-Heads are ported stockers that I bought used, but really aren't all that special and are one of the big limiting factors AFA power for now... I plan on possibly upgrading to some quality AI's down the road.

-Cam is a grind from my shop to best suit my setup.

-The exhaust is complete from 1 3/4" LT headers and 3" yipe down to an SLP Loudmouth with no emissions. It actually sounds amazingly nice considering theres no cat, I was expecting a lot of rasp with it, but it actually sounds really nice.

Thanks again and feel free to post anymore questions

[Fixxer99TA]

Wow, nice setup. Plan on hitting the track anytime soon?

Id be interested to see what it runs, and any pics?

[95z28man]

Wow, nice setup. Plan on hitting the track anytime soon?

Id be interested to see what it runs, and any pics?

I'm excited to get it to the track, I've never been to a track before so it'll be my first time, but I'm waiting on getting the money for a 9" rear and some slicks. The motor is also built for nitrous, so after I get some NA numbers, I'll be saving up for about a 200 shot.

I'll have to put some pics up soon, just need to wash it up and get some better shots. The video is kinda dark, the silver is actually lighter than it appears. All it needs is some tint and clear reflectors on the rear sides, then the black/silver color scheme will be complete.

Thanks

[Louvit]

I'll admit, I just watched it again and when my car starts next week I hope it sounds half as mean...

[95z28man]

I'll admit, I just watched it again and when my car starts next week I hope it sounds half as mean...

Haha, thanks. What have you done with your car?

[Louvit]

Bore 4.00
Stroke 3.48
Piston Compression Height 1.125
Rod Lenght 6.125

Piston brand Cosworth forged +5cc

Rods Scat Pro Series I-beams

Crank Scat cast internal balance

Rings Total seal top ring is gapless, .043 top, 1/16 2nd and 3/16 oil

Heads are LE1.5 stock valve sizes with 56cc chambers. according to lloyd they should be 180-185cc's.

Springs K-motion k800's with TI retainers and +.50 locks. Install height is
1.80

Heads have studs installed so do the main caps. Its still 2bolt mains.

Oil pump Melling 10552

Cam Lunati 60123 duration 243/251 at .050 lift .597int .602 exh with a 1.6
rocker lsa 110 icl 106 install straigh up with no advance

[95z28man]

Sounds like good setup. Your cam is actually bigger than mine. Should sound pretty aggressive. Good luck and post up a vid when you get it done.

[casper383]

Sounds wicked! Hood looks sick too!

[95z28man]

Yeah I love my hood, too bad it's not functional...:rolleyes: