- Navigation
Results 1 to 10 of 163
-
11-28-2014, 05:27 PM #1Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
My first build thread project " bail money"
Hey guys, this whole thing started cuz i was bored at work and was searching craigslist. The ad read 93 z28 full bolt ons needs a fuel pump and rear end i have the parts but cant finish something very important came up. So a few hours later i meet with the seller and find out he needs money by 10:00 am the next day because he has a warrant for his arrest, hence " project bail money"! Anyway, a few mins later and a few hundred less than his asking price, i brought this home......
-
11-28-2014, 05:30 PM #2Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
My first build thread project " bail money"
Nice! Heck of a bargaining opportunity right there
Do you have some plans in mind, other than the necessary repairs, yet?'72 Nova "HadeSS"
-
11-28-2014, 05:42 PM #3Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
-
11-28-2014, 06:02 PM #4Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
So, i start tinkering with the no start issue. Car starts and dies, seller said fuel pump, i thought vats, we were both wrong. The computer wasnt bolted down and apparantly was pulling on the dark blue fuel injector enable wire and it snapped. Spliced it back together and vroom !! Loud rumbling throuh the flowmaster at 1:30 a.m. Yea my neighbors love me. Take it for a spin and the rear end is toast. Go home, pull it apart; it kicked a c clip but the 4:11 ring and pinion is fine, its gonna get re installed in spring. For now i swapped i a complete 323 and added a girdle diff cover
-
11-28-2014, 06:05 PM #5Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
The next day i cut off the flowmaster cat back, i woulda kept it but it had a loose baffle jingling around n sounded like crap. A $23 glasspack and im in business. Sounds pretty good with the pacesetter longtubes ory and !cats
-
11-28-2014, 06:08 PM #6Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
Bored at work again, cruisin craigslist and look what i found...
-
11-28-2014, 06:12 PM #7Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
Brand new wheels, never been torqued down, tires are about half life left. So, i grabbed a six pack, sawzall, bfh, cutoff wheel and guess what they fit haha! I made this little device to make things easier and uniform...
-
11-28-2014, 06:16 PM #8Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
Next i did a battery relocation to the trunk, used 0 gauge wire and found this cool batt cutoff switch at oreilly's. It has a removable key and its perfect in the trunk lock hole......
-
11-28-2014, 06:20 PM #9Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
My dad had an old tach/shift light setup i bought him for his old car and ha couldn't use it on his new one, installed, thx dad! Don't mind the center console i'm in the middle of the b&m megashifter install now
-
11-28-2014, 06:23 PM #10Lurker
- Status
- Offline
- Join Date
- Nov 2014
- Name
- rob
- Vehicle
- 1993 z28
- Location
- West side of chi- town
- Posts
- 430
Had an old compucar nitrous setup (minus bottle) on my shelf for years, not anymore....
Bookmarks