Coil brackets

[pngwn]

Does anyone have a set of coil brackets to mount ls style coils on the centerbolt valve covers ? Anywhere besides Efi connection make them ?


Sent from my iPhone using Tapatalk

[firebird_1995]

I've got these. Bought them for a 24x setup and went another direction. One set is for the heat sink coils and the other is not. I think the aluminum ones are for non heat sink

[superspirit]

BP automotive makes a nice economical set. And he is a sponsor on here also.

[pngwn]

I've got these. Bought them for a 24x setup and went another direction. One set is for the heat sink coils and the other is not. I think the aluminum ones are for non heat sink

I have a set of coils with the heat sink already. The black setup looks like the factory bracket from the ls motor which won't clear the oil cap or breather on lt1. Which coil is the aluminum set for and what are you asking for them ?


Sent from my iPhone using Tapatalk

[pngwn]

BP automotive makes a nice economical set. And he is a sponsor on here also.

I will look into them. Thanks


Sent from my iPhone using Tapatalk

[firebird_1995]

I have a set of coils with the heat sink already. The black setup looks like the factory bracket from the ls motor which won't clear the oil cap or breather on lt1. Which coil is the aluminum set for and what are you asking for them ?


Sent from my iPhone using Tapatalk

The 2 on the right are factory ls brackets. The single one pictured is a modified factory bracket that was on an lt1. I've got the other one somewhere. I'll have to see what the aluminum ones fit. I was thinking they were the opposite of the modified set. I'll get back to you

Sent from my SM-G900V using Tapatalk

[firebird_1995]

The aluminum brackets are for the heat sink coils and attach to the fuel rails. $50 shipped

Sent from my SM-G900V using Tapatalk

[pngwn]

The aluminum brackets are for the heat sink coils and attach to the fuel rails. $50 shipped

Sent from my SM-G900V using Tapatalk

Do you have the hardware for them ? I will look at my intake Monday and see if they will work. I switched to a single plane.


Sent from my iPhone using Tapatalk

[firebird_1995]

Same hardware that holds the injector rails down. I don't think there will be anything there to bolt to on a single plane though. Most of the rails for single plane intakes bolt through the side of the rail. This would be more for factory intakes. I could probably make you a set that would work if you didn't want to bolt to the valve cover.

Sent from my SM-G900V using Tapatalk

[Dan]

If he doesn't take it, I'll take it @firebird_1995