- Navigation
Results 1 to 10 of 15
-
12-19-2014, 09:58 AM #1
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
What all do I need to tune a 96 with OBD1 swap?
As it states in the question. I used to have tuner cats on an old Laptop using a serial cable. however it is junk. Still have the cable and a usb convertor(To go from serial to usb) What do I need beside that? is everyone still using tunercats? If so where do I get ti and what can I get to log with? Thanks
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
12-19-2014, 10:01 AM #2
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
You can just get a obd1.5 cable to usb from aldlcable.com for $30, go on tunercat.com and down load cats obd1 tuner, pay $20 for a definition file for $ EE bin. Get data master for logging, tunercat rt is glitchy at best
2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
12-19-2014, 12:01 PM #3
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
The cable I see is $59 bucks. It that the one? Also canu downlaod tuner cats for free, then buy the definition file $EE for $20 then it is good to go? And where to get datamaster and howmuch is it?
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
12-19-2014, 06:54 PM #4
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Nate
- Vehicle
- 1995 Firebird Formula
- Location
- Boise, ID
- Posts
- 8
Look into this: http://ltxtech.com/forums/showthread...light=scan9495
You won't need datamaster if you use that tool, and it has a document with it that shows you how to make yourself a usb to OBD cable for like 10 or 15 bucks. You will need the definition file and tuner cat though
-
12-25-2014, 10:49 AM #5
InActive Member
- Status
- Offline
- Join Date
- Nov 2014
- Name
- Walter Devine
- Vehicle
- 1996 Z28 2002 Z28
- Location
- Rowletts, Kentucky
- Posts
- 341
Thanks fellas, Im gonna see what I actually have and then what i will need. Like I said i have tuner cats on an old laptop but not sure if it is usable or If I can get it off. Ill post back later, Thanks again
96 Z28 LT1 stroker, cage 9 inch, spray 10.24@134.58 1.54 60
02 Z28 edge converter, LTs, lid, cam, spray 12.0@112N/A
-
12-26-2014, 09:19 PM #6
"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
Thats what i have... actually @TubbyFormy is in possession of the set up right now.
Originally Posted by TubbyFormy
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
12-26-2014, 09:20 PM #7
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
Speaking of which, whoever needs it next, I believe @JCZNova , it's ready for you Originally Posted by popo8
2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
12-26-2014, 10:17 PM #8
Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
Yes I am ready if you got an OBD-II cable that worked. Do I just PM my address? Originally Posted by TubbyFormy
'72 Nova "HadeSS"
-
12-26-2014, 10:19 PM #9
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
I didn't get a cable that worked, I had to buy jet dst for myself. I believe @popo8 was looking into getting the cable from carputing.com (lt1edit) Originally Posted by JCZNova
2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
12-26-2014, 10:19 PM #10
"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
I was... just never got around to doing it.
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
The Following User Says Thank You to popo8 For This Post:
Reply With Quote
Bookmarks