- Navigation
Results 1 to 5 of 5
Thread: What else do I need?
-
02-03-2009, 11:18 AM #1
What else do I need?
Ok, My car was a non ram air car I recently bought the airbox so besides the hood, what else am i going to need to make my car a ram air car? Thanks
2003 Mustang Cobra SVT: just an Eaton... 505/525
1996 Trans Am: 52mm Holley, LPP Longtubes, GMMG Catback, 3.73's, PCMforless tune. SOLD
1995 Trans Am: Borla Exhaust, K&N Air Intake, pacesetter headers. SOLD
-
02-03-2009, 11:56 AM #2
You should only need the airbox and hood,to make it look stock you will need the harness extension for the MAF it is roughly 8" long but if you are delicate enough with the factory harness you can make it streatch.
-
02-03-2009, 11:57 AM #3
I'm not going to need anything to connect them? The stock stuff will work?
2003 Mustang Cobra SVT: just an Eaton... 505/525
1996 Trans Am: 52mm Holley, LPP Longtubes, GMMG Catback, 3.73's, PCMforless tune. SOLD
1995 Trans Am: Borla Exhaust, K&N Air Intake, pacesetter headers. SOLD
-
02-03-2009, 12:16 PM #4
did it not come with the boot from the TB to Maf? you for sure don't want to buy a factory one $$$$$$,you can get a FERNCO from home depot for $5.00-$8.00
if you scroll down on the link you will get an idea of the coupler needed
http://www.ls1tech.com/forums/lt1-lt...there-lt1.htmlLast edited by 96lt1m6; 02-03-2009 at 12:22 PM.
-
02-25-2009, 01:36 PM #5
anything else?
2003 Mustang Cobra SVT: just an Eaton... 505/525
1996 Trans Am: 52mm Holley, LPP Longtubes, GMMG Catback, 3.73's, PCMforless tune. SOLD
1995 Trans Am: Borla Exhaust, K&N Air Intake, pacesetter headers. SOLD
Bookmarks