- Navigation
Results 1 to 5 of 5
Thread: 1995 Turn Signal Wiring
-
01-14-2024, 05:44 PM #1
1995 Turn Signal Wiring
Need some help with this one.
Here is what I am working with
I need to figure out what to feed 12v to and what I use as an output for hazard on signal.
Help please.Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
01-15-2024, 09:36 AM #2
Here's a link to the '95 factory service manual. I think it's Gary Doug's work that supplied the link. So thank him.
https://www.mediafire.com/?40mfgeoe4ctti'97 SS SLP,T56, Spec stage 2+ clutch,385 stroker,AFR210,XFI292,Moser 12 bolt eaton posi 4.10's. NO traction til top of 3rd gear.
'57 Chevy 3100 p/u LT1/T56
Wife's '94 Z28 has been sold.
-
01-15-2024, 09:49 AM #3
Thank Fred(Injuneer)too. I had to go back and hunt for the link. The link that works perfect is the one Fred gave in post #66.
'97 SS SLP,T56, Spec stage 2+ clutch,385 stroker,AFR210,XFI292,Moser 12 bolt eaton posi 4.10's. NO traction til top of 3rd gear.
'57 Chevy 3100 p/u LT1/T56
Wife's '94 Z28 has been sold.
-
01-15-2024, 04:33 PM #4
Yea, spent too long thinking about this. Gonna take the rear left and right turn signal outs, they go to pin 86 & 30 on a relay, pin 85 to ground and 87 becomes hot out when both turns are on aka hazard switch pulled
Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
01-15-2024, 05:00 PM #5
Shit, I forgot to link the post;
https://www.firebirdnation.com/threa...&sortby=oldest'97 SS SLP,T56, Spec stage 2+ clutch,385 stroker,AFR210,XFI292,Moser 12 bolt eaton posi 4.10's. NO traction til top of 3rd gear.
'57 Chevy 3100 p/u LT1/T56
Wife's '94 Z28 has been sold.
Bookmarks