- Navigation
Results 1 to 10 of 17
Thread: F-body 8.8 housing w/axles
-
02-13-2018, 10:17 AM #1
F-body 8.8 housing w/axles
I have a f-body 8.8 rearend. I didn't build it. I got it off a friend that had it in his 98 Ws6, and he did all the work. He used pete-z bars instead of a torque arm mount. Its an 8.8 center section with 10 bolt axle tubes welded on. IIRC its stock length. Has 31spline c-clip axles (splines ARE tweaked). Center section was from a mustang but was grenaded and is hollow. Will come with LT-1 backing plates. IIRC is had the LCA relo brackets welded on.
I have a weld on Hiltsy torque arm mount, just have to find it.
Will get better pics ASAP. I can ship this no problem!
$650 OBO
10577134_10152196347647493_9100648373982799887_n.jpgLast edited by gunters96lt1; 02-13-2018 at 10:22 AM.
1996 T/A - 383, BW S-475, TH350, Trickflows, LE Cam, Revmax
-
02-13-2018, 10:21 AM #2Lurker
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Johnny
- Vehicle
- 1994 formula A4
- Location
- Henderson, TN
- Posts
- 935
I forget, where were you located at?
-
02-13-2018, 10:25 AM #3
Central IL. But i can ship.
1996 T/A - 383, BW S-475, TH350, Trickflows, LE Cam, Revmax
-
02-13-2018, 11:05 AM #4Lurker
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Johnny
- Vehicle
- 1994 formula A4
- Location
- Henderson, TN
- Posts
- 935
Will the stock 28 spline axles work in it with a 28 spline carrier?
-
02-13-2018, 11:08 AM #5
-
02-14-2018, 08:47 AM #6
BUMP it
1996 T/A - 383, BW S-475, TH350, Trickflows, LE Cam, Revmax
-
02-16-2018, 09:00 AM #7
Price is OBO someone needs this!
1996 T/A - 383, BW S-475, TH350, Trickflows, LE Cam, Revmax
-
02-19-2018, 10:18 AM #8
BUMP! would like to move this and willing to make someone a deal.
1996 T/A - 383, BW S-475, TH350, Trickflows, LE Cam, Revmax
-
02-19-2018, 10:57 AM #9
Where are you located?
-
02-19-2018, 01:57 PM #10
Bookmarks