Become a ltxtech.com member, Click here to register!
Lloyd Elliott

Results 1 to 6 of 6
  1. #1
    LTX Member


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    75

    Default 4th Gen F-body Hooker Blackheart True Dual Exhaust Install

    I though I would share some photos of this installation. This is a very exciting upgrade to the car for me. I think the original exhaust was nearly choking the engine and was not the sound I like being an old hotrodder. It also marks the near completion of a troublesome 1 1/2 year upgrade project on the car.
    I bought the lowest priced Hooker system just after Christmas on a 20% off sale with free shipping. $719.99. Keep in mind this is an LT1 car with Hooker full length competition headers which Hooker DOES NOT offer a custom dual system for, DUH. You have to order an LS1 system which fits great from the cross over back and you're on your own with the tie in to the LT1 headers.
    '94 Z28 Bone stock,4l60e
    '97 SS SLP,T56,385 stroker,AFR210,XFI292,NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56

  2. #2
    LTX Member


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    75

    Default

    Photos of new system mocked up on shop floor. Long story but the funny photo of me was to send to my honorary grandson. His Daddy said he cracked up laughing when he saw it.IMG_1256.JPGIMG_1260.JPGIMG_1259.JPGIMG_1260.JPGIMG_1261.JPGIMG_1263.JPG
    '94 Z28 Bone stock,4l60e
    '97 SS SLP,T56,385 stroker,AFR210,XFI292,NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56

  3. #3
    LTX Member


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    75

    Default last photo

    The last photo is with the exhaust tips correctly orientated, I had slipped them on reversed L to R.
    '94 Z28 Bone stock,4l60e
    '97 SS SLP,T56,385 stroker,AFR210,XFI292,NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56

  4. #4
    LTX Member


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    75

    Default

    Out with the old system, a Magnaflow all stainless, nice stuff, but not my cup of tea. I did really like the scavenger look of the tailpipes.IMG_1268.JPGIMG_1271.JPGIMG_1272.JPGIMG_1276.JPG
    '94 Z28 Bone stock,4l60e
    '97 SS SLP,T56,385 stroker,AFR210,XFI292,NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56

  5. #5
    LTX Member


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    75

    Default

    The fit is good, supplied hardware is high quality. The clearance over the axle is good but I'm gonna have to massage the heat shields in that area just a bit.
    Passenger side alignment with the header collector is good, drivers side is about four inches off. Keep in mind this system is for an LS1 with mid-length headers. I'm planning on a no torch, no weld approach to do the tie in to the collectors. My car is missing the catalytic converter hanger bracket and hanger, I wish I had it because the front section of pipes was designed to hang from that bracket. After trying to find one new they are obsolete. After further reading it appears that because this is an SLP car it was likely removed when the car was modified by them with the original SLP exhaust system.Attachment 38146Attachment 38147IMG_1281.JPG
    '94 Z28 Bone stock,4l60e
    '97 SS SLP,T56,385 stroker,AFR210,XFI292,NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56

  6. #6
    LTX Member


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    75

    Default Couple of photo

    '94 Z28 Bone stock,4l60e
    '97 SS SLP,T56,385 stroker,AFR210,XFI292,NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •