Become a ltxtech.com member, Click here to register!
SSS

Results 1 to 7 of 7
  1. #1
    LTX Master


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    600

    Default 4th Gen F-body exhaust hangers GM part numbers

    Hey All, Does anybody have the GM part numbers for the exhaust hangers. I'm missing the part that bolts to a T56 with the rubber grommet and the part that slips into that grommet and bolts to the downpipe bracket. After alot of searching I can't find a diagram with all the part numbers. Can anybody help?
    Nolan
    '97 SS SLP,T56, Spec stage 2+ clutch,385 stroker,AFR210,XFI292,Moser 12 bolt eaton posi 4.10's. NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56
    Wife's '94 Z28 has been sold.

  2. #2
    Xtreme Member


    Status
    Offline
    Join Date
    Nov 2012
    Name
    Shaun
    Vehicle
    1994 Formula
    Location
    Phillipsburg NJ
    Posts
    7,249
    Supporting Member

    Default

    Quote Originally Posted by JOATMON View Post
    Hey All, Does anybody have the GM part numbers for the exhaust hangers. I'm missing the part that bolts to a T56 with the rubber grommet and the part that slips into that grommet and bolts to the downpipe bracket. After alot of searching I can't find a diagram with all the part numbers. Can anybody help?
    Nolan
    none of them are made anymore to my knowledge. I had to call hawks third gen and have them take the complete bracket/bolt assembly off a salvage car

    Sent from my SM-N950U using Tapatalk
    2021 Charger Scat 392
    1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot

    The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
    10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!

  3. #3
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Quote Originally Posted by JOATMON View Post
    Hey All, Does anybody have the GM part numbers for the exhaust hangers. I'm missing the part that bolts to a T56 with the rubber grommet and the part that slips into that grommet and bolts to the downpipe bracket. After alot of searching I can't find a diagram with all the part numbers. Can anybody help?
    Nolan
    U could always just swing by an exhaust shop amd see what they would use...

    Sent from my SM-G955U using Tapatalk


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  4. #4
    LTX Master


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    600

    Default

    Hey Tubby, Thanks for the reply and I see you are correct on the availability factor. I did find the GM part numbers after alot of google drilling. It seems the parts remained the same for automatic and stick shift cars from the LT1 all the way up to the LS1 cars. Thats according to one source, so don't quote me on it. The part that bolts to the transmission has two different GM numbers, either 10284835 or 10293946, the hanger that slips into this part and bolts onto the down pipe assembly is part# 10262319. I may get a dealer to do a nationwide search and see if any dealers might have them collecting dust. Thanks again. Nolan
    '97 SS SLP,T56, Spec stage 2+ clutch,385 stroker,AFR210,XFI292,Moser 12 bolt eaton posi 4.10's. NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56
    Wife's '94 Z28 has been sold.

  5. #5
    LTX Master


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    600

    Default

    Hey Popo, Thanks for the reply. I could probably get some from a salvage car like Tubby did, but I'm thinking that I can likely fabricate a hanger bracket myself. I've already got all the parts required to make this a DIY project what won't require a muffler shop. Once I get it all hung under the car, I may find that I don't even need this hanger, we'll see. Nolan
    '97 SS SLP,T56, Spec stage 2+ clutch,385 stroker,AFR210,XFI292,Moser 12 bolt eaton posi 4.10's. NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56
    Wife's '94 Z28 has been sold.

  6. #6
    Xtreme Member


    Status
    Offline
    Join Date
    Nov 2012
    Name
    Shaun
    Vehicle
    1994 Formula
    Location
    Phillipsburg NJ
    Posts
    7,249
    Supporting Member

    Default

    Quote Originally Posted by JOATMON View Post
    Hey Popo, Thanks for the reply. I could probably get some from a salvage car like Tubby did, but I'm thinking that I can likely fabricate a hanger bracket myself. I've already got all the parts required to make this a DIY project what won't require a muffler shop. Once I get it all hung under the car, I may find that I don't even need this hanger, we'll see. Nolan
    personally I don't run that hanger

    Sent from my SM-N950U using Tapatalk
    2021 Charger Scat 392
    1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot

    The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
    10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!

  7. #7
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Quote Originally Posted by JOATMON View Post
    Hey Popo, Thanks for the reply. I could probably get some from a salvage car like Tubby did, but I'm thinking that I can likely fabricate a hanger bracket myself. I've already got all the parts required to make this a DIY project what won't require a muffler shop. Once I get it all hung under the car, I may find that I don't even need this hanger, we'll see. Nolan
    Good deal man. Keep us posted thru the steps.

    Sent from my SM-G955U using Tapatalk


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •