- Navigation
Results 1 to 5 of 5
Thread: Double roller timing chain
-
09-23-2017, 04:07 PM #1
Lurker
- Status
- Offline
- Join Date
- Jan 2012
- Posts
- 39
Double roller timing chain
Will a double roller timing chain clear the stock cover ? I am running a electric water pump .
-
09-23-2017, 05:14 PM #2
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
Most will. Best thing to do is bolt the cover on without a gasket and rotate the engine around 2 revolutions. Take the cover off and check for marks on it. If it will clear without a gasket you're good.
Sent from my SM-G900V using TapatalkChris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
The Following 2 Users Say Thank You to firebird_1995 For This Post:
-
09-23-2017, 06:08 PM #3
Lurker
- Status
- Offline
- Join Date
- Jan 2012
- Posts
- 39
Ok , thanks for the help
-
10-06-2017, 06:31 AM #4
Lurker
- Status
- Offline
- Join Date
- Oct 2013
- Location
- Evansville, IN
- Posts
- 143
I'm running a Cloys double roller on mine.... I had to clearance the cover.... not a big deal at all
96 Vert 383 forged AFR 210 LT4 Intake CP Pistons T400 Moser 9" Borg Warner S480
-
10-06-2017, 10:05 AM #5
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
usually have to grind the cover, not a big deal, but a solid single roller clears without any mods
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
Reply With Quote
Bookmarks