Become a ltxtech.com member, Click here to register!
SSS

Results 1 to 5 of 5
  1. #1
    Lurker


    Status
    Offline
    Join Date
    Apr 2017
    Name
    Dylan
    Vehicle
    97 camaro z28 30th anniversary
    Posts
    149

    Default 97 4l60e shift point

    What is the factory shift point on a 97 4l60e? I don't know if my ECU has been tuned or what but I let out of mine at 6200 and it still hasn't shifted. And what's a safe rpm for a stock 96 4 bolt main?


    Sent from my iPhone using Tapatalk
    Last edited by Slow 30th; 09-18-2017 at 05:39 PM.

  2. #2
    Lurker


    Status
    Offline
    Join Date
    Apr 2017
    Name
    Dylan
    Vehicle
    97 camaro z28 30th anniversary
    Posts
    149

    Default

    Safe rpm anybody?


    Sent from my iPhone using Tapatalk

  3. #3
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Factory shift points were around 5800. You're probably not going to pick up any more power after 6000 with the stock cam. If its got an aftermarket cam you can probably stretch it out to 6300-6400 safely. I've seen guys go to 6800 on stock bottom end but I believe they were just doing it to say they did. Unless you've got a good set of heads there's no reason to spin one that high

    Sent from my SM-G900V using Tapatalk
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  4. The Following User Says Thank You to firebird_1995 For This Post:


  5. #4
    Lurker


    Status
    Offline
    Join Date
    Apr 2017
    Name
    Dylan
    Vehicle
    97 camaro z28 30th anniversary
    Posts
    149

    Default

    Well I just want to make sure I'm at a safe rpm before I really let it eat and see what somebody had the shift point at. Thanks you so much


    Sent from my iPhone using Tapatalk

  6. #5
    Lurker


    Status
    Offline
    Join Date
    Apr 2017
    Name
    Dylan
    Vehicle
    97 camaro z28 30th anniversary
    Posts
    149

    Default

    Well I just want to make sure I'm at a safe rpm before I really let it eat and see what somebody had the shift point at. Thanks you so much


    Sent from my iPhone using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •