- Navigation
Results 1 to 8 of 8
Thread: Wide band options?
-
04-09-2017, 08:24 PM #1
Wide band options?
Hey guys, I'd like to get set up to start tuning my 95. I would like to pick up a wide band in about a month, so I figured I'd start researching my options right now.
I read through the stickies, but that info seems pretty dated. So I figured I'd make a thread and see what you guys prefer. My only requirement is I need to be able to data log it. Thanks1995 formula a4,100,000mi, 10 bolt 3;73,tci 3000,hooker supercomp Lt's,100,000mi,n/w plate w/150 jets, mt/dr's.,a few more bolt ons. 12.70's/105. 11.60's/118
-
04-09-2017, 08:42 PM #2Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Memberaem uego, backfeed red wire on a.c. pressure sensor or hardwire to that red wire, custom bit data in datamaster and poof, there it is. logging it
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
04-09-2017, 11:28 PM #3Xtreme Member
- Status
- Offline
- Join Date
- Apr 2012
- Name
- Mike
- Vehicle
- 96 Z28, 95 Roadmaster
- Location
- Conshohocken, PA
- Posts
- 1,865
^^^^ This, just remember to change the AC pressure fan enable/disable or else your fan will go haywire with the WB voltage
96Z M6, ERE-383 #60, AFR 210s, LE cam, 9", Procharger D1, ???whp
95 Roadmaster T-56 swap, LE1s, baby cam, 4.56s, "The Cammaster"
95 Firehawk hooptie, bolt-ons and suspension
-
The Following User Says Thank You to Catmaigne For This Post:
-
04-10-2017, 04:03 AM #4Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
04-10-2017, 03:23 PM #5
I got the LM2 I believe, havent had the time to install it yet, but its a hand held, not a gage, the only reason I purchased it was because supposedly I can data log with this and with the pillar pod gage models I couldnt find one that said I could data log.
-
04-11-2017, 04:59 PM #6
Well, I think I am leaning toward the aem 30-0300. It looks pretty nice for the cost and the reviews seem pretty good. And I believe I will be able to data log with it. They run about $165 on Ebay which I don't think is too bad at all. What do you guys think of this unit?
1995 formula a4,100,000mi, 10 bolt 3;73,tci 3000,hooker supercomp Lt's,100,000mi,n/w plate w/150 jets, mt/dr's.,a few more bolt ons. 12.70's/105. 11.60's/118
-
04-11-2017, 07:13 PM #7Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
04-12-2017, 06:38 AM #8
If you just want to datalog, grab a LC2 and hardwire it as Shaun indicated.
https://www.amazon.com/Innovate-Moto.../dp/B00FFTAJPC
If you want to later, grab a summit wideband gauge and wire it in. Thats how mine is semi set up. I have the leads to log with HPT but have not done that.Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
The Following User Says Thank You to shownomercy For This Post:
Bookmarks