- Navigation
Results 1 to 4 of 4
Hybrid View
-
03-15-2017, 10:07 PM #1VIP Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- Mark
- Vehicle
- 1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
- Location
- Altoona, PA
- Posts
- 809
Help with AJE Racing Spindle Strut Coilovers
Have this setup for my car. Ball joint boots are torn and I want to replace. Does anybody have any idea how this setup comes apart? Can't find anything online.
Sent from my iPad using TapatalkStock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.
-
03-22-2017, 01:56 PM #210 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Josh
- Vehicle
- 96 Z28
- Location
- Holden, MO (KC)
- Posts
- 2,867
I wish I could help but I've never seen that setup before.
-Josh
co-owner of BDBRacing.com
NMCA OC 9004
96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!
-
03-22-2017, 02:05 PM #3VIP Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- Mark
- Vehicle
- 1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
- Location
- Altoona, PA
- Posts
- 809
Should have posted. I contacted AJE Suspension Thur Facebook. Apparently I have to take the springs off and then there's a cap to remove the strut cartridge assembly out of the tube. Then I can get to the nut.
Sent from my iPhone using TapatalkStock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.
-
07-01-2017, 01:42 PM #4VIP Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- Mark
- Vehicle
- 1993 Camaro Z28, 2005 Chevy Silverado 3500 Crew cab dually, 2005 GMC Yukon Denali
- Location
- Altoona, PA
- Posts
- 809
Well I finally got new ball joints boots and steering rack boots. Took the time to weigh everything I pulled off and compared to this setup. Knocked 160lbs off the front end with this setup, removing the sway bar, ABS and power steering. Think I may relocate the battery next. That would be another 39lbs off the front.
Sent from my iPad using TapatalkStock bottom end, Impala head gaskets, Stock heads w/stage 2 port polish Comp beehive springs, Crane 1.6 RR's, Thunder Racing cam, Cloyes Billet True Roller TC, Long tubes, custom true dual 3" w/X-pipe, Ported intake with 58mm TB, 36lb injectors, PCMforless chip, Tick Performance stage 3 M6, Strange S60 4:10's True Trac 35 spline axles, MSD complete Ignition system, Summit electric water pump and a ton of other upgrades.
Bookmarks