- Navigation
Results 1 to 10 of 28
Thread: Torque head
-
10-10-2016, 09:01 AM #1
Torque head
So this has been out a while and am wondering if people are happy with it that do a good amount of track duty.
-
10-10-2016, 10:42 AM #2Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting MemberMet a guy at a car show with a 94 shit brown caprice, ellwein stroker, and torque head who drove up from maryland. Hes a bracket racer and car is consistent 11's on motor. He said he loves it.
Its a 24x setup, whats not to like? Only complaint i would have is the pcm is repinned by them, so if u brick a computer, they have power of demand and price.
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
10-10-2016, 11:05 AM #3
-
10-10-2016, 11:07 AM #4Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
10-10-2016, 12:00 PM #5
Or repin your harness and run a standard 0411. That is the only way I'd consider it.
-
The Following User Says Thank You to superspirit For This Post:
-
10-10-2016, 01:06 PM #6
If they'd have come out with an adapter plate, that would have made this kit a no-brainer. Sockets for the original leads on one side and then leads for the 411 on the other. In their defense, they do have a 5 year warranty on their PCM and they say that they'll replace it even if it bricks in a flash - but the fact remains that your car is down until you get a new PCM from them. If you wanted to actually buy a spare, its like $500+ just for the unit.
-
10-10-2016, 06:11 PM #7Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
10-18-2016, 08:52 PM #8
Im sure they would sell you a spare PCM to have, as a spare. I think it comes with a 5yr warranty as well.
94' Z -383 LTx, AI TFS 215cc heads/C/I
S60 rear
Stepped Hedman Hustlers an a Monoblade TB
-
10-19-2016, 01:32 PM #9
Not sure how it works if you brick a pcm but this is right from their website
Finally, we always 100% test each PCM on our test bench to make sure all inputs/ouputs are functioning within specification. We are pleased to provide warranty on this PCM and should it ever fail then simply send it back for a new one.
-
10-19-2016, 04:58 PM #10
-
The Following User Says Thank You to superspirit For This Post:
Bookmarks