- Navigation
Results 1 to 7 of 7
Thread: Firebird 3.8 Sway Bar
-
11-27-2016, 12:39 PM #1
LTX Member
- Status
- Offline
- Join Date
- Sep 2016
- Name
- Brandon Reitz
- Vehicle
- 1995 Pontiac Trans Am
- Posts
- 53
Firebird 3.8 Sway Bar
My 97 Firebird 3.8L has been pulling bad and ate through the tires pretty quick and has been sitting for almost 2 years. My buddy had an 02 Camaro that he upgraded the full suspension and gave me the old parts. I am replacing all shocks, rear springs, upper and lower A arms, rear control arms, panhard bar and other parts. The parts have 20k on them OEM. We were putting them on today and found out the sway bar is cracked. Can this be welded or is that dumb? Guess anyone wouldn't happen to have one laying around?
Last edited by brarei200; 11-27-2016 at 12:43 PM.
-
11-27-2016, 02:54 PM #2
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
I have a stock front bar, where are u located?
Originally Posted by brarei200
My 97 Firebird 3.8L has been pulling bad and ate through the tires pretty quick and has been sitting for almost 2 years. My buddy had an 02 Camaro that he upgraded the full suspension and gave me the old parts. I am replacing all shocks, rear springs, upper and lower A arms, rear control arms, panhard bar and other parts. The parts have 20k on them OEM. We were putting them on today and found out the sway bar is cracked. Can this be welded or is that dumb? Guess anyone wouldn't happen to have one laying around?
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
11-27-2016, 04:44 PM #3
LTX Member
- Status
- Offline
- Join Date
- Sep 2016
- Name
- Brandon Reitz
- Vehicle
- 1995 Pontiac Trans Am
- Posts
- 53
Reading, PA
Thank you!
-
11-27-2016, 05:06 PM #4
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
Check ur fb message requests Originally Posted by brarei200
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
11-27-2016, 05:13 PM #5
Xtreme Member
- Status
- Offline
- Join Date
- Apr 2012
- Name
- Cameron
- Vehicle
- 1994 Formula
- Location
- Dover, De
- Posts
- 2,076
I also have my front swaybar as well. Think Shawn will be a tad closer.
2012 Sierra - 5.3, Summit "Stage 1" Truck Cam
1994 Jimmy - LS? LT? 4wd? AWD? Time? Money?
1994 Formula - 5.3, Terminator X, Billet VS7875, "Best Cam", T56, QP 9"
Formula Build Thread
-
11-28-2016, 08:21 AM #6
LTX Member
- Status
- Offline
- Join Date
- Sep 2016
- Name
- Brandon Reitz
- Vehicle
- 1995 Pontiac Trans Am
- Posts
- 53
can the sway bar be welded?
-
11-28-2016, 09:02 AM #7
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
No Originally Posted by brarei200
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
The Following User Says Thank You to SSlowBoat For This Post:
Reply With Quote
Bookmarks