- Navigation
Results 1 to 10 of 11
-
11-11-2016, 04:57 PM #1
Lurker
- Status
- Offline
- Join Date
- Dec 2010
- Location
- west chciago
- Posts
- 918
Already thinking about going th400
So like the title says im already thinking about going to a 400 with a brake. I know i have 3 passes at the track with the new set up but i think the car with the 400 and brake it would improve my 60 foot time a tone i was turning a 1.7 need to be down low like 1.4-1.3 sixty foots so i just seeing your guys options on the matter. And sorry left the caps on lol. If you want info on set up just ask
-
11-11-2016, 07:08 PM #2
The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
What do you currently have?
Sent from my SM-G900V using TapatalkChris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
11-11-2016, 08:25 PM #3
Lurker
- Status
- Offline
- Join Date
- Dec 2010
- Location
- west chciago
- Posts
- 918
Pro race 4l60e from frank with a PTC 36-3800 stall
Sent from my SCH-I535 using Tapatalk
-
11-11-2016, 09:17 PM #4
Lurker
- Status
- Offline
- Join Date
- Sep 2014
- Name
- Joel
- Vehicle
- 1996 camaro Police interceptor
- Location
- Colorado
- Posts
- 1,157
Our you running a brake on your current set up?
Sent from my SM-N915V using Tapatalk
-
11-12-2016, 06:12 AM #5
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
Sounds like you have something Going on. Converter is to tight, gearing wrong, motor aint making enough power etc... i know a few people that sixty foot and go fast with a 60e.
-
The Following User Says Thank You to dawdaw For This Post:
-
11-12-2016, 07:26 AM #6
Lurker
- Status
- Offline
- Join Date
- Nov 2008
- Vehicle
- 94 trans am
- Location
- chatsworth,GA
- Posts
- 324
What he said^^^. Been 1.33 60ft on 4l60e
94 trans am forged 355, le 21* trickflows, le cam, a4 3800 stall
-
11-12-2016, 07:31 AM #7
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,271
Supporting Member
@Cahall
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
11-12-2016, 11:22 AM #8
LTXTech Sponsor
- Status
- Offline
- Join Date
- Jan 2013
- Name
- Gail C. Cahall
- Vehicle
- 93 Camaro, 95 Impala SS, 01 Corvette, '05 Dodge Ram
- Location
- Newark, Delaware
- Posts
- 619
We actually see cars 60 ft worse after a transbrake TH400 swap compared to a footbrake 4L60E. The 3.06 first gear ratio of the 4L60E is far superior over the 2.48 first gear of the TH400. The car will also average around a .1 second slower with a TH400. When you say "PTC" converter, do you actually mean PTC or are you confusing PTC with Protorque?
FrankGail C. Cahall
CAHALL PERFORMANCE TRANSMISSIONS
-
11-12-2016, 11:32 AM #9
Lurker
- Status
- Offline
- Join Date
- Dec 2010
- Location
- west chciago
- Posts
- 918
Yes pro torque lol frank and I just need some people that have been faster then I have to smack me on the back of the head so 60e it is then
Sent from my SCH-I535 using Tapatalk
-
11-12-2016, 12:22 PM #10
VIP Member
- Status
- Offline
- Join Date
- Apr 2011
- Name
- KYLE
- Vehicle
- 95 MQBM Z28
- Location
- davison michigan
- Posts
- 3,874
What et and mph? Weight? Rear gear? Engine combo?
Reply With Quote
Bookmarks