- Navigation
Results 1 to 10 of 15
Thread: Line lock
-
09-21-2016, 01:29 PM #1
Line lock
Slp line lock install went easy. Slight brake issue.
The pedal is harder than normal and will get very hard and have no stopping power behind it, with a low trac light every so often.
Set the brakes then the lock and it still pushes the front wheels but has resistance.
Abs was bleed, the brakes back and forth.
Any ideas?
Thanks
-
09-22-2016, 04:51 AM #2"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
@Fastbird makes and sells linelock kits. I know this is not one of his, but I tagged him in hopes that he may understand ur issue and how to correct it.
LTXtech.com IS my drug...
OWNER/ADMIN
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
09-22-2016, 07:04 AM #3
How did you bleed the ABS block? They can have air stuck in them if you don't pulse em with tech2 etc.
Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
09-22-2016, 11:46 PM #4
Sorry for the spelling mistakes. Late night in phone.
-
10-18-2016, 01:34 PM #5
To add to this I drove it around and mashed on the brakes a few times. Got the abs to go off and the brakes def got better. I'm assuming there is air in the abs unit
-
10-19-2016, 03:26 PM #6
yes how can you bleed the abs block
-
10-19-2016, 06:02 PM #7Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,249
Supporting MemberPressure bleed should do it
Sent from my SAMSUNG-SM-G935A using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
10-20-2016, 09:05 AM #8
Your suppose to have a scanner like a gm tech 2 or somthing of the sort to activate the abs solenoid to bleed it.
But you can do some hard stops on gravel to make the abs go off and that works to
-
10-20-2016, 05:33 PM #91997 Pontiac Trans Am WS6 clone | Build Thread | - just needs paint!
2001 Chevy Silverado 2500HD (the DD)
-
10-21-2016, 06:47 AM #10
Bookmarks