- Navigation
Results 1 to 5 of 5
Thread: Header Gasket - Use Or Not Use
-
08-02-2016, 06:36 AM #1
Header Gasket - Use Or Not Use
Have my hot side mocked up and ready to make final assembly.... How many turbo guys not running header gaskets?? Seems the people I know who are running turbos are spilt 50/50.... I'm told not running gaskets will reduce the chance of gasket blow out.
What's your thoughts??
Thanks!! - Tim96 Vert 383 forged AFR 210 LT4 Intake CP Pistons T400 Moser 9" Borg Warner S480
-
08-02-2016, 09:27 AM #2
I run copper RTV on aluminum MLS dead soft gaskets, so far no blowouts. My setup is prob on the high side of backpressure as well.
Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
08-02-2016, 01:35 PM #3
Great to know shownomercy... Do you know what part number?? I have AFR 210's
96 Vert 383 forged AFR 210 LT4 Intake CP Pistons T400 Moser 9" Borg Warner S480
-
08-02-2016, 01:58 PM #4
I used these
https://www.summitracing.com/parts/php-66031
But I have stock D port heads, not sure they will work on AFRs.Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
12-08-2016, 10:26 PM #5
Percy's High Performance XX Carbon exhaust header gaskets are the best.
Bookmarks