- Navigation
Results 1 to 10 of 26
-
06-01-2015, 05:16 AM #1LTX Member
- Status
- Offline
- Join Date
- May 2014
- Name
- Karl Ellwein
- Vehicle
- 1995 Impala SS
- Location
- Maryland, USA
- Posts
- 17
580hp 502tq 397ci LT1 on engine dyno (8.5:1)
The heaviest rotating assembly I have ever put together surprised me on the engine dyno when it pulled solid HP and torque numbers, (580/502).
Note that I've only had a few motors on the engine dyno. This is the flattest torque curve I have seen for an LT1. Big, thick, heavy, sturdy pistons may actually do what Diamond claims, (make more power than short skirt pistons). Well I don't know but it's fun to investigate. I'm sure the heads and cam are 90% of this story.
+.700" lift mechanical roller cam from Ai, (for F1R blower motor). 21* TFS heads by Ai (with inconel exhaust valves). 3/8" pushrods and SS Crower shaft rockers keep it firm.
I have a new customer that is going to do close to this same head-cam combo but for an all natural application. I hope to show 600 dyno hp in a few months from that motor. It will be very interesting to see what more compression and less rotating mass will do.
Dyno video link via youtube https://youtu.be/FyEmVfqDJq0
Link to build specs http://www.ellweinengines.com/ERE54JeZus/ERE54.htm
powergraph2.jpg2493.jpg570.jpg
-
The Following User Says Thank You to Karl Ellwein For This Post:
-
06-01-2015, 05:22 AM #2"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
Wow... thats impressive!
Thank u for posting Karl, look forward to more posts from u.
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
06-01-2015, 06:04 AM #3Xtreme Member
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Brian DeLuca
- Vehicle
- 1997 Trans Am WS6
- Location
- Piscataway, NJ
- Posts
- 1,297
Great build. I am looking forward to seeing what this will do with boost. What is the anticipated redline for this motor? Is there a reason the 21 degree heads were selected versus the bigger units on the market?
97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
17 Corvette Z06 - 11.05 @ 125
17 GMC Sierra Denali Dmax
-
06-01-2015, 07:01 AM #4Xtreme Member
- Status
- Offline
- Join Date
- Nov 2008
- Name
- Chris
- Vehicle
- 1994 Trans Am
- Location
- PA, USA
- Posts
- 2,438
Thanks, Karl! That thing is a monster, for sure.
1994 Trans Am Under the knife - but it's alive!!! (5.3 LM7/CPT 60e/QP 9") BUILD THREAD
2009 G8 GXP M6, full exhaust, catch can, cai, stereo
1975 Olds 98 455 burnout machine/panty dropper | 1985 C10 new project
-
06-01-2015, 08:16 AM #5Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting MemberThat is a thing of lt1 beauty! Nice work karl!
2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
06-01-2015, 08:43 AM #6
Killer
97 firehawk m6 with a forged long rod 355 stock heads and intake soon to be upgraded to LE 21* tfs heads and a big ass cam , rpm built level 5 t56 trans s60 with 4.30 gears umi suspension walbro pump and hot wire kit and a spinning best 12.36 @ 114 crap 60 foot.
-
06-01-2015, 10:39 AM #7
Very nice. I love the rockers. Crower makes good stuff.
1994 Camaro Z-28 M6
LE 242/248 cam,Crower split ratio rockers,AI 23*Trick Flow heads,JetHot longtube headers,Borla exaust,ewp,pro5.0,hybrid TNT wet kit.
-
06-01-2015, 10:40 AM #8Lurker
- Status
- Offline
- Join Date
- Nov 2013
- Name
- Guillaume
- Vehicle
- 95 Caprice & 89 RX7
- Location
- Montreal, Qc
- Posts
- 334
This is going to be a monster with the blower!!
How much power do you expect it to make with the F1R?1989 Mazda RX7 Turbo II, 357ci LT1, AI TFS CNC heads, Garrett GTX4708R, Ford 8.8" SAS, TH400. (Current project)
1995 Chevy Caprice, Twin turbo 357ci LT1, 9.96 @ 141.2 mph (sold)
-
06-04-2015, 04:05 AM #9LTX Member
- Status
- Offline
- Join Date
- May 2014
- Name
- Karl Ellwein
- Vehicle
- 1995 Impala SS
- Location
- Maryland, USA
- Posts
- 17
Red line: 6500rpm . I told Anders the owner that 6000 rpm would be a good shift point and to keep her under 6500rpm for longevity. Brian, for the 21* ? I don't know. Ai was told the application and they picked the 21* TFS. Maybe the motor would do better with bigger heads seeing it is a big boost FI motor. Anders just wants to get his car down the track quicker than his buddy, (my other Swedish customer). So if he can sort out his car combo and tune and keep this motor alive I'll be happy. Those heads are an odd pick for a big boost motor now that you mention it.
-
06-04-2015, 04:07 AM #10LTX Member
- Status
- Offline
- Join Date
- May 2014
- Name
- Karl Ellwein
- Vehicle
- 1995 Impala SS
- Location
- Maryland, USA
- Posts
- 17
Guillamue I think 1000 hp with the blower. He had already made that much in the previous combo with AFR heads and JE/SRP pistons.
Bookmarks