- Navigation
Results 1 to 4 of 4
Thread: Competition Clutch Stage 4
-
07-30-2014, 03:36 PM #1InActive Member
- Status
- Offline
- Join Date
- Apr 2014
- Name
- GJGARRE
- Vehicle
- 1995 Z28
- Location
- Greater Cincinnati Area
- Posts
- 67
Competition Clutch Stage 4
Anybody on here running a Competition Clutch stage 4 setup? If so, can you tell me what your clutch looks like? The reason I ask, is that I called NOPI and ordered a stage 4 clutch kit, and after installing it, and trying it out for a little while, I'm thinking I was sent a stage 5 by mistake. Every website seems to have a different picture and model number for a stage 4, or stage 3, etc. so i wasn't sure what to expect. I can't find the box it came in to double check the model number, but I'm thinking it is a stage 5.
It's probably a great clutch for a full on strip car, but for city driving, it is a major pain in the @ss. It has no slip to it at all, and makes driving in traffic a test of foot work. The only reason I went with the stage 4 is that they said it was the only one rated at over 400hp. My thoughts are that even if it was overkill I would rather have too much rather than too little. Next time I am going with a stage 3 or 2.5.
My question is.....to anybody running a stage 4, was it the 6 puck style clutch disk, or was it the standard round clutch disk?
Thanks
-
07-31-2014, 01:57 PM #2InActive Member
- Status
- Offline
- Join Date
- Apr 2014
- Name
- GJGARRE
- Vehicle
- 1995 Z28
- Location
- Greater Cincinnati Area
- Posts
- 67
Nobody is running a Competition Clutch Stage 4?
-
07-31-2014, 02:41 PM #3InActive Member
- Status
- Offline
- Join Date
- Mar 2012
- Name
- Jlo
- Vehicle
- 1995 Camaro Z28
- Location
- B'ville
- Posts
- 239
I know a lot of guys run the 2.5...
1995 Z28 T-Top M6 (Stock)
-
08-02-2014, 07:29 AM #410 Second N/A Club
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Josh
- Vehicle
- 96 Z28
- Location
- Holden, MO (KC)
- Posts
- 2,867
CC used to have pics on their website but now that sections says it's under construction. I'd email them a pic and get an answer directly from the manufacturer.
-Josh
co-owner of BDBRacing.com
NMCA OC 9004
96, N/A 385, Holley EFI, Faceplated M6, AI TFS heads, LE SR cam, MWC Fab 9
10.16 @ 136 1.50 60'........still workin on that 60' shootin for 1.4's!
Bookmarks