- Navigation
Results 1 to 6 of 6
Thread: ac problems someone help!!
-
04-21-2014, 03:15 PM #1
Banned
- Status
- Offline
- Join Date
- Mar 2014
- Name
- john
- Vehicle
- 93 z28
- Location
- decherd,tn
- Posts
- 78
ac problems someone help!!
so i decided to check why my ac wasnt working first i found the clutch pigtail was cut, repaired it jumped the low switch and charged it up. now this is where i am lost, as the compressor cycles it pulls the pressure down on the low side to the point it cuts off, also while running going down the road you can really feel it cycling like crazy on off on off but while sitting still it cools perfectly but once you give it gas it cycles on off on off. anyone got a clue where to start checking things at i am lost!
-
04-21-2014, 04:12 PM #2
LTX Master
- Status
- Offline
- Join Date
- Feb 2014
- Name
- 95albinobird
- Vehicle
- 95 firehawk tribute
- Location
- mooresville nc
- Posts
- 772
93 that was around when they were changing from r12 to r134a.is you car r12?
Last edited by 95albinobird; 04-21-2014 at 04:21 PM.
-
04-21-2014, 04:30 PM #3
Banned
- Status
- Offline
- Join Date
- Mar 2014
- Name
- john
- Vehicle
- 93 z28
- Location
- decherd,tn
- Posts
- 78
No its r134
Sent from my LG-L38C using Tapatalk 2
-
04-21-2014, 04:31 PM #4
Banned
- Status
- Offline
- Join Date
- Mar 2014
- Name
- john
- Vehicle
- 93 z28
- Location
- decherd,tn
- Posts
- 78
Its r134
Sent from my LG-L38C using Tapatalk 2
-
04-21-2014, 05:49 PM #5
LTX Regular
- Status
- Offline
- Join Date
- Aug 2013
- Name
- Gary
- Vehicle
- 1998 Trans Am
- Location
- Florida
- Posts
- 241
Maybe you overcharged it. Have someone put a gauge on it.
1998 Trans Am - LS1/A4 - all stock and almost all original - one owner - driven daily.
Author of Scan9495, free pc apps 93-95 LT1,94/95 L32: http://ltxtech.com/forums/showthread...light=scan9495
-
04-21-2014, 10:17 PM #6
LTX Master
- Status
- Offline
- Join Date
- Feb 2014
- Name
- 95albinobird
- Vehicle
- 95 firehawk tribute
- Location
- mooresville nc
- Posts
- 772
there is a blow off on the compressor if it's over charged it should release the overage.you may have a bad expansion block that what regulates the pressures.
i got a compressor kit from rockauto it had o rings the expan block compressor and receiver dryer hell the compressor even had the pag oil in it.
Reply With Quote
Bookmarks