- Navigation
Results 1 to 3 of 3
Thread: cooling issue
-
03-14-2014, 05:32 PM #1
cooling issue
Since I installed a LT1 in my 72 C10 it wants to run hot at low speed and idle. I used all the FBody cooling components. Can i make the orginal rad out of my truck work with the LT1.
[SIGPIC]
-
03-14-2014, 05:44 PM #2LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,283
Shoebox has a diagram of the F-Body versions of the LT1 cooling system (Corvette is different). They are marked to show flow direction. See if these help:
http://shbox.com/1/93-94_hoses.jpg
http://shbox.com/1/heater_hoses_93-94.jpg
http://shbox.com/1/95-97_hoses.jpg
http://shbox.com/1/heater_hoses.jpg
The main difference between 93/94 and 95-97 is the routing of the steam line from the back of the heads.SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
03-14-2014, 06:27 PM #3
Thanks man
[SIGPIC]
Bookmarks