camaro ram air

**gwoodtitansz28** · 09-11-2008, 08:12 PM

anyone know what i need to make the harwood ram air hood for camaros functional?

**KissMyWhtSS** · 09-11-2008, 08:14 PM

What's it look like? It's not a cowl hood is it?

**gwoodtitansz28** · 09-11-2008, 08:24 PM

its this one.

**phantomzer0** · 09-11-2008, 08:29 PM

Do they advertise it as being functional? I think any solution that has a filter plug directly into the maf would work just fine, as long as it is exposed.

These are the FIPK by K&N, the pictures are on an LS1, put I'm pretty sure the GEN2 version of it is the exact same as these.

Attachment 37

Attachment 38

**KissMyWhtSS** · 09-11-2008, 08:33 PM

Yeah you could prob fab up a LS1 FIPK or maybe a ultra-z/ws6 airbox.

**gwoodtitansz28** · 09-11-2008, 09:07 PM

ya thats what i was thinking. there are some ultra z kits on suncoast but they're like $340 bucks. i could probably use some weather stripping to seal the filter to the hood. maybe i can buy it part by part on ebay.

**gwoodtitansz28** · 09-11-2008, 09:09 PM

the site says ram air but it doesnt say anything about it having a kit. im sure it wouldnt be to hard to fab it

**BLK95TA** · 09-13-2008, 05:30 PM

i bet you could also grab an oem WS6 airbox..I think you can get a lid from SLP for $85 that doesn't say "pontiac ram air" on it, i got my whole kit (upper and lower box, K&N filter, and both the MAF to TB bellow and a TB to box coupler which i didnt use because my stock one off my own MAF was in better shape) for $115 shipped but from what i've seen that was a steal and not likely to happen to everyone.

**jaysz2893** · 09-13-2008, 06:51 PM

I got the ultra z hood and box. SLP want way too much IMHO. The box is nothing more than a stock WS6 box. THe lid was cut out to expose the whole filter. You can piece one together probally pretty reasonably. I have a 93, so i dunno about fitting a MAF in there, but it is tight between the box and the TB. I used parst from my K&N Cai to make the coupling. Hope this helps..