- Navigation
Results 1 to 10 of 19
-
07-12-2013, 06:41 PM #1
speedpro pistons, eagle rods, comp cam f\s or trade.
i have a set of speedpro -5cc flat top pistons that are .030 over for sale. $100
i have a set of eagle 5.7 rods. i beams. $200
i have a comp cam thumpr cam. $200
all of these have 6,000 miles on them and havent been cleaned up since taken out. trying to get some money out of them as i bought forged parts and a custom cam. interested in trades let me know if you have something. located in gatlinburg tn. pics below have the piston and rods part number the other picture is the cam card. Make offer shipping not included in prices. Thanks. below is a link of these parts in my last set up its a video of the cam. car idling at 1,000rpm.
2013-07-12_13.25.32.jpgpistons.jpg
2013-07-12_13.29.08.jpg2013-07-12_13.25.53.jpg
-
07-13-2013, 07:19 PM #2
-
07-18-2013, 11:03 AM #3
Bump any offers..
-
07-18-2013, 05:19 PM #4
What is the part # on those pistons? Thank you.
Sent from my LG-P769 using Tapatalk 2
-
07-18-2013, 05:53 PM #5The FABRICATOR!
- Status
- Offline
- Join Date
- Jul 2011
- Name
- Chris
- Vehicle
- 1985 Monte Carlo SS
- Location
- southern illinois
- Posts
- 7,164
H860CP030 is what was on the balancing sheet.
Chris
1985 Monte Carlo SS
Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
Check out the M122 MCSS build thread here!
-
07-18-2013, 06:14 PM #6
Yea its the one from the balence sheet H860cp030.
-
07-18-2013, 10:15 PM #7
Ok was not sure
Sent from my LG-P769 using Tapatalk 2
-
07-20-2013, 09:58 AM #8
-
07-21-2013, 01:33 AM #9
What kind of power did you make with that cam? What are the specs?
-
07-21-2013, 09:22 AM #10
I never had it dynoed so on the power I don't know but it ran good as far as specs I have a pic of the cam card on here but it was like a 547 lift and duration was around 227-241 I believe.
Bookmarks