- Navigation
Results 1 to 5 of 5
Thread: Removing Rear Wheel Studs
-
05-13-2011, 06:01 PM #1
InActive Member
- Status
- Offline
- Join Date
- Jan 2009
- Location
- Tucson, AZ
- Posts
- 732
Removing Rear Wheel Studs
What do I have to remove to be able to remove the rear wheel studs? They are all loose, but there is no way they are going out the back without something being removed.
ThatAdStudent.com - Advertising and Graphic Design Blog
1993 Camaro Z28 M29 - Down for Repairs and Upgrades
-
05-13-2011, 07:52 PM #2
VIP Member
- Status
- Offline
- Join Date
- Jan 2009
- Name
- Paul Edwards
- Vehicle
- 1993 Camaro Z28
- Location
- Port Charlotte FL
- Posts
- 2,666
i replaced all of mine without even removing the rotor, just knocked them out with a hammer and angled them out, finagled the new ones in an then used a lug nut with washer to pull them on. i did the fronts to the same way.
1995 Formula 383/t56 gone
1993 Camaro Z28, forged, TFS heads, solid roller, prosystems carbed, t56 swapped spec 3+
"Nitrous is like Tara Reid with an STD. You want to hit it, but your afraid of the consequences"
-
05-17-2011, 12:25 AM #3
VIP Member
- Status
- Offline
- Join Date
- Jan 2009
- Location
- Florida
- Posts
- 11
remove axle
1993 Camaro Z28
-
05-17-2011, 09:15 AM #4
InActive Member
- Status
- Offline
- Join Date
- Sep 2009
- Posts
- 273
did mine with the axle still in the car. but mine where all half broke
Originally Posted by RCC
If the lag for some reason becomes an issue I will spray it till it becomes a non-issue..
-
05-17-2011, 09:25 AM #5
"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
When we replaced the ones in my 10 bolt, we pulled the axle...
On a side note, the new 9" had a hole strategically placed where you could rotate the stud to line up, WHACK it and it would launch out the hole....
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
Reply With Quote
Bookmarks