Yea I have the torqhead kit, it’s running good!


Sent from my iPhone using Tapatalk

Oh ok well good to hear it was working for you, hopefully it tests out ok this time


Sent from my iPhone using Tapatalk

I know it’s been a awhile but how did the ltcc work out?


Sent from my iPhone using Tapatalk

Hm didn't think of this. I'll look into that.


Sent from my iPhone using Tapatalk

Thx, Great! Glad it's working for you


Sent from my iPhone using Tapatalk

Yea the only reason why I would upgrade is to get the aluminum tank instead of plastic to avoid the cracking. But not sure if the price justifies that. The radiator in there now is the original...

Nothing wrong with stock but figured if I'm replacing it, might as well upgrade. Local shop said a jb weld won't do


Sent from my iPhone using Tapatalk

http://www.protuninglab.com/j2-008.html

Looking at this one but would like to spend a little less if I can


Sent from my iPhone using Tapatalk

My oem radiator has a slight crack and is leaking very subtly so looking to get a new one. Anyone have a preference in brand? I'm running the 24x ignition system but not planning on modding anything...

Any preference on what 12v to splice the OBD2 into?


Sent from my iPhone using Tapatalk

Personally, I've had bad luck with it and it may just be because the guy who installed it did a botch job to begin with in wiring and then I basically had to redo the wiring and replace the opti a...

Thanks for the diagram. Got it figured out. What is your opinion on connectors for splicing the new harness to the original harness? Was looking at the conduct-tite gm tech terminal connectors or...

Ok. Yea I agree. Don't have a stock wiring diagram


Sent from my iPhone using Tapatalk

Questions I have are

What original wires went to the 4-pin connector from the old wiring harness? What was wired to the 16 pin connector on the ltcc harness? Currently after the ltcc install the...

Doing the 24X link conversion on my 1994 Z. I have the LTCC currently and swapping it for the torqhead kit. Everything is done except for the PCM replacement and wiring. The guy who installed my LTCC...

Thanks, I think I am leaning towards getting the kit from Torqhead.

There shouldn't be any issue with icm because I have the LTCC. Here are pics of the wave forms. Pic 1 is just as it begins to break down and pic 2 is when it shut off.3761237613

I just checked out that Scan9495 data log post on CZ28. Very helpful info.. No codes were thrown from the obd1 scanner but the signals were checked coming out of the opti and were irregular from the...

I will check this too thanks

Don't have a catch can. As far as I know the pcv system is stock and hasn't been checked. But that's helpful I will def be getting a catch can and going through the pcv system.

I would put the msd cap on it but only issue would be the warranty voided

It's spline drive, unvented unfortunately

I also may have issues with gas in oil.. when I changed the oil it was black and smelled like gas. Could be a number of possibilities but I'm wondering...

I know its 50-50 on here about keeping the opti spark or doing the LS ignition conversion but before I go ahead and spend 1K just wanted to see what some of you thought.. I already have the LTCC and...

I know this post is older but saw it and wanted to reply directly. I am in south florida as well and having the same issue with the opti as I did before doing the LTCC conversion, a year later after...

Thanks. I don't need the whole kit though because I have the coils mounted already.